☎ (888) 228 9138

Over 15 years experience of providing support of MEAN WELL Power Supplies

1 3

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Envo

ENVO Zigbee 2-Gang In-Wall Switch - On/Off Control

ZigBee 3.0 protocolsupport Touchlinkcan be controlled by remote
SKU EV-ZB9101SAC-HPS2CH
$60.05 USD
Shipping calculated at checkout.
In stock
|

Overview

EV-ZB9101SAC-HPS2CH is the 100-240VAC output model of this series.

Features

  • 2-gang ZigBee in-wall switch based on latest ZigBee 3.0 protocol
  • 100-240VAC wide input and output voltage
  • Supports resistive loads and capacitive loads
  • 2 channels output, max. load 5.1A/CH
  • Input and output with screw terminals, safe and reliable
  • Enables to control ON/OFF of connected load
  • ZigBee device with 2 endpoints which can be controlled separately
  • ZigBee end device that supports Touchlink commissioning
  • Can directly pair to a compatible ZigBee remote via Touchlink without coordinator
  • Supports self-forming zigbee network without coordinator and add other devices to the network
  • Supports find and bind mode to bind a ZigBee remote
  • Supports zigbee green power and can bind max. 20 zigbee green power switches
  • Compatible with universal ZigBee gateway products
  • Can be controlled by universal single wire push switch, 2 channels can be controlled separately by 2 switches
  • Active power and energy metering functionality
  • Mini Size, Easy to be installed into a standard wall box
  • Radio Frequency : 2.4GHz
  • Waterproof grade: IP20

Specifications

EV-ZB9101SAC-HPS2CHSpecifications from the official datasheetDownload datasheet PDF

Product Data

Input Voltage
100-240VAC
Output Voltage
100-240VAC
Output Channel
2 Channels
Max. Load
Resistive load: max. 5.1A/CH Capacitive load: max. 1.7A/CH
Size(LxWxH)
45.5x45x20.3mm

Compatible Load Types

LED lamps with transformers
390W/CH @ 230V, 180W/CH @ 110V. Note: Due to variety of LED lamp designs, maximum number of LED lamps is further dependent on power factor result when connected to switch.
LED drivers
390W/CH @ 230V, 180W/CH @ 110V. Note: Maximum permitted number of drivers is 390W divided by driver nameplate power rating.
Incandescent lighting, HV Halogen lamps
1170W/CH @ 230V 560W/CH @ 110V
Low voltage halogen lighting with electronic transformers
390W/CH @ 230V 180W/CH @ 110V

Certifications & ratings

Certification marks
CE, FCC, RoHS, ZigBee
Test conditions and notes4
  1. 1. Directly TouchLink (both not added to a ZigBee network), each device can link with 1 remote.
  2. 2. TouchLink after both added to a ZigBee network, each device can link with max. 30 remotes.
  3. 3. To control by both gateway & remote, add remote and device to network first then TouchLink.
  4. 4. After TouchLink, the device can be controlled by the linked remotes.

Downloads

FAQ

What does the ENVO ZigBee 2Gang In-wall Switch control?

This model provides on/off control for two separate channels in one compact in-wall device. It is designed for switching connected loads rather than dimming them, and each ZigBee endpoint can be controlled independently.

Is this switch a dimmer or only an on/off controller?

The EV-ZB9101SAC-HPS2CH is an on/off controller, not a dimmer. It is intended for applications where you need ZigBee-based switching of two loads without brightness adjustment.

What load capacity does this ZigBee switch support?

This 2-channel model supports up to 5.1A per channel for resistive loads and up to 1.7A per channel for capacitive loads. It operates on 100-240VAC input and output, with a listed power rating of 1170W per channel for incandescent loads at 230V.

Is the ENVO ZigBee 2Gang switch compatible with standard ZigBee systems?

Yes. It uses ZigBee 3.0 and is described as compatible with universal ZigBee gateway products. It also supports Touchlink commissioning, find-and-bind mode, ZigBee Green Power, and can bind up to 20 ZigBee Green Power switches.

Does this model support energy monitoring?

Yes. The switch includes active power and energy metering functionality, which can be useful for monitoring load usage in commercial or smart building environments. This adds visibility beyond basic on/off control.

Where can this switch be used?

This model is intended for indoor use, with an IP20 rating and an operating temperature range of -20°C to 50°C. It should not be exposed to moisture, making it better suited to dry interior environments.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Other ENVO Zigbee Series Models

49 other models
ModelOutputsOutput TypeDimming
Ltech T4 Wireless RF Multi-zone Remote - RGBW — RF Signal RF Signal View
Ltech LT-3800-350 Constant Current LED Controller 3 Normal Non Dimmable View
Ltech T3-5A Wireless RF Constant Voltage Controller - 3 Channel 3 RF Signal RF Signal View
Ltech M7+M3-3A Mini Controller with RF Remote - RGB 3 RF Signal RF Signal View
Ltech LT-3060S PWM Constant Voltage Repeater - RGB 3 PWM Non Dimmable View
Ltech DIN-711-12A Din Rail 1-10V LED Controller 12A 1 Normal 0-10V,10V PWM,1-10V,Push Dimming View
Ltech M4+M4-5A LED RF 4 Channel RGBW Wireless Remote & Controller Set - RGBW 4 RF Signal RF Signal View
Ltech M1+M3-3A Mini Controller with RF Remote - Dimming 3 RF Signal RF Signal View
Ltech LT-916-OLED Constant Voltage Decoder - DMX/RDM 16 DMX Signal,PWM,RDM Signal DMX,RDM Signal View
Ltech LT-854-5A Constant Voltage Decoder - DMX/RDM 4 DMX Signal,PWM,RDM Signal DMX,RDM Signal View
Ltech LT-3030-6A PWM Constant Voltage Repeater - RGB 3 PWM Non Dimmable View
Ltech V1 Wireless RF Single-zone Remote - Dimming — RF Signal RF Signal View
ENVO ZigBee AC Phase Dimmer 1 — AC Phase Cut Dimming,Push Dimming,Zigbee View
Ltech Q5 Wireless RF Multi-zone Remote - RGBWW — — — View
Ltech T1 Wireless RF Multi-zone Remote - Dimming — RF Signal RF Signal View
Ltech Mini LED fantastic controller SPI-16S+M16S — RF Signal Non Dimmable View
Ltech M6+M3-3A Mini Controller with RF Remote - RGB 3 RF Signal RF Signal View
Ltech M4+M4-3A Mini Controller with RF Remote - RGBW 4 RF Signal RF Signal View
Ltech LT-844 Signal Converter - DMX/Push to PWM/0-10V 4 0-10V Signal,PWM DMX,Push Dimming View
Ltech LT-3600RF LED RGB Controller 3 Normal Non Dimmable View
Ltech LT-3010-8A PWM Constant Voltage Repeater - Dimming 1 PWM Non Dimmable View
Ltech F4-5A Wireless RF Constant Voltage Controller - 4 Channel 4 PWM PWM View
Ltech F4-3A Wireless RF Constant Voltage Controller - 4 Channel 4 PWM PWM View
Ltech EX8S Wireless RF/DMX512 Multi-zone Touch Panel - RGBW — DMX Signal DMX View
Ltech E4 Single-zone Touch Panel - RGBW 4 PWM PWM View
Ltech DMX-50-500-1750-F1P1 DMX Driver 500-1750mA 50W 1 PWM DMX,Push Dimming,RDM Signal View
Mean Well PLC-DPLC-32MT Programmable Logic Controller with Open PLC Architecture — — — View
Mean Well PLC-DPLC-32ET Programmable Logic Controller with Open PLC Architecture — — — View
Ltech LM-150-24-G1T2 CV Triac Dimmable Driver 150W 24V 6.25A 1 — AC Phase Cut Dimming View
Mean Well DALI2 Panel 6-Keys U Type 6 DALI Signal DALI2 View
Mean Well DALI2 Panel 6-Keys E Type 6 DALI Signal DALI2 View
Mean Well DALI2 Panel 4-Keys U Type 4 DALI Signal DALI2 View
Mean Well DALI2 Panel 3-Keys E Type 3 DALI Signal DALI2 View
ENVO Zigbee Economic Single Colour Remote 1 — Zigbee View
ENVO Zigbee Economic RGB+CCT Colour Remote 1 — Zigbee View
ENVO DALI2 Relay On/Off Control, Configurable Single Address 1 — DALI View
ENVO ZigBee Microwave Sensor IP65 with ZHAGA Interface Socket — — 0-10V,Zigbee View
ENVO ZigBee Fixture Integrated PIR+Photocell Sensor — — 0-10V,Zigbee View
ENVO ZigBee Fixture Integrated Microwave+Photocell Sensor — — 0-10V,Zigbee View
ENVO ZigBee Motion + Light + Temperature + Humidity 4-in-1 Sensor — — Zigbee View
ENVO Zigbee Ceiling Mounted PIR Sensor, 0-10V Dimming — — 0-10V,Zigbee View
ENVO PRO DALI2 DT8 LED Controller RGBWW 5 CH 12-36VDC 5 — DALI View
ENVO ZigBee Self-powered Remote 1 — Zigbee View
ENVO ZigBee Gateway Smart Hub 1 — Zigbee View
ENVO Zigbee to DALI + 0/1-10V 2-in-1 Converter 1 — 0-10V,1-10V,DALI,Zigbee View
ENVO ZigBee In-wall Switch - On/Off Control, 16A 1 — Zigbee View
ENVO ZigBee 5 Channel Controller 12-48V 4-8A per Channel 5 — Zigbee View
ENVO ZigBee Single Colour Mini Controller 12-36V 8A 1 Channel 1 — Zigbee View
ENVO ZigBee Blinds Controller - On/Off and Level Control 1 — Zigbee View
{ "id":9599231033664, "variants" :[{ "context":"default", "variant_id": 49718290743616, "sku":"EV-ZB9101SAC-HPS2CH", "inventory_qty" : 30, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$60.05\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
ENVO Zigbee 2-Gang In-Wall Switch - On/Off Control
Envo

ENVO Zigbee 2-Gang In-Wall Switch - On/Off Control

$60.05 USD

EV-ZB9101SAC-HPS2CH is the 100-240VAC output model of this series.

Features

  • 2-gang ZigBee in-wall switch based on latest ZigBee 3.0 protocol
  • 100-240VAC wide input and output voltage
  • Supports resistive loads and capacitive loads
  • 2 channels output, max. load 5.1A/CH
  • Input and output with screw terminals, safe and reliable
  • Enables to control ON/OFF of connected load
  • ZigBee device with 2 endpoints which can be controlled separately
  • ZigBee end device that supports Touchlink commissioning
  • Can directly pair to a compatible ZigBee remote via Touchlink without coordinator
  • Supports self-forming zigbee network without coordinator and add other devices to the network
  • Supports find and bind mode to bind a ZigBee remote
  • Supports zigbee green power and can bind max. 20 zigbee green power switches
  • Compatible with universal ZigBee gateway products
  • Can be controlled by universal single wire push switch, 2 channels can be controlled separately by 2 switches
  • Active power and energy metering functionality
  • Mini Size, Easy to be installed into a standard wall box
  • Radio Frequency : 2.4GHz
  • Waterproof grade: IP20
View product

  • Call us

    (888) 228 9138

  • Email us

    contact@wellforces.com

  • Business Hours

    Mon-Fri
    EST 9:00am-5:30pm

  • Wholesale and Trade Account

    Let's grow together
Back to top