Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
RID-65A is the 5V / 12V output model of this series: rated current 6A / 3A, rated power 66W, typical efficiency 80%.
Features
- Isolated output & GND for CH1,CH2
- Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- LED indicator for power on
- 100% full load burn-in test
- All using 105℃ long life electrolytic capacitors
- Withstand 300VAC surge input for 5 second
- High operating temperature up to 70℃
- Withstand 5G vibration test
- High efficiency, long life and high reliability
- 3 years warranty
Specifications
OUTPUT
- OUTPUT NUMBER
- CH1 / CH2
- DC VOLTAGE
- 5V / 12V
- RATED CURRENT
- 6A / 3A
- CURRENT RANGENote.6
- 0 ~ 8A / 0 ~ 4A
- RATED POWERNote.6
- 66W
- RIPPLE & NOISE (max.)Note.2
- 80mVp-p / 120mVp-p
- VOLTAGE ADJ. RANGE
- CH1: 4.75 ~ 5.5V
- VOLTAGE TOLERANCENote.3
- ±2.0% / ±8.0%
- LINE REGULATIONNote.4
- ±0.5% / ±1.5%
- LOAD REGULATIONNote.5
- ±0.5% / ±5.0%
- SETUP, RISE TIME
- 500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load
- HOLD UP TIME (Typ.)
- 50ms/230VAC 12ms/115VAC at full load
INPUT
- VOLTAGE RANGE
- 88 ~ 264VAC 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage)
- FREQUENCY RANGE
- 47 ~ 63Hz
- EFFICIENCY(Typ.)
- 80%
- AC CURRENT (Typ.)
- 2A/115VAC 1.2A/230VAC
- INRUSH CURRENT (Typ.)
- COLD START 50A/230VAC
- LEAKAGE CURRENT
- <2mA / 240VAC
PROTECTION
- OVERLOAD
- 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE
- CH1: 5.75 ~ 6.75V Protection type : Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT
- WORKING TEMP.
- -25 ~ +70℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20 ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +85℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03%/℃ (0 ~ 50℃)on +5V output
- VIBRATION
- 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note 7)
- SAFETY STANDARDS
- UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, BIS IS13252(Part1): 2010/IEC 60950-1:2005 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
- ISOLATION RESISTANCE
- I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, EAC TP TC 020
OTHERS
- MTBF
- 2940.2K hrs min. Telcordia SR-332 (Bellcore) ; 541.0K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 129*98*38mm (L*W*H)
- PACKING
- 0.44Kg; 30pcs/14.2Kg/0.72CUFT
Test conditions and notes8
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
- 3. Tolerance : includes set up tolerance, line regulation and load regulation, when multi-channel output, it is recommended that CH1 load > 10%.
- 4. Line regulation is measured from low line to high line at rated load.
- 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
- 6. Each output can work within current range. But total output power can't exceed rated output power.
- 7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
- 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
Technical drawings
Downloads
Certificates1
FAQ
Can I use the RID-65A for 5V industrial automation electronics that need more current than a 50W model?
Yes, this model provides dual outputs: 5V at 6A and 12V at 3A. The total rated power is 66W. This dual-channel configuration offers flexibility for automation electronics requiring different voltage rails, unlike single-output models.
Is the RID-65A suitable for 5V embedded computing or edge-control devices in a panel?
It can be used for embedded computing or edge-control devices designed for 5V DC (up to 6A) and 12V DC (up to 3A), with a total power limit of 66W. Its 129 × 98 × 38 mm size also fits many panel and enclosure layouts.
Can this model power 5V HMI support electronics or industrial communications hardware?
Yes, if the HMI support electronics or communications hardware require 5V DC (up to 6A) and/or 12V DC (up to 3A) and remain within the 66W total power limit. The enclosed construction makes it better suited to protected industrial housings than open exposure.
Is RID-65A appropriate for harsh indoor factory conditions?
The operating temperature range is -25°C to +70°C, and the features list includes 5G vibration and 70°C operation. With no IP rating listed, it is best used in protected indoor enclosures rather than exposed outdoor locations.
How does RID-65A differ from the other RID series power supplies listed here?
RID-65A is 66W with dual outputs: 5V at 6A and 12V at 3A. Other listed siblings are RID-65B at 68W, 5V/24V; RID-50A at 50W, 5V/12V; RID-50B at 50W, 5V/24V; RID-85A at 85W, 5V/12V; RID-85B at 85W, 5V/24V; RID-125-1205 at 125W, 5V/12V; RID-125-1224 at 125W, 12V/24V; RID-125-1248 at 125W, 12V/48V; RID-125-2405 at 125W, 5V/24V; and RID-125-2448 at 125W, 24V/48V.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other RID Series Models
50 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.



