☎ (888) 228 9138

Over 15 years experience of providing support of MEAN WELL Power Supplies

1 3

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Envo

ENVO ZigBee Ceiling Mounted Microwave Sensor, 0-10V Dimming

ZigBee 3.0 protocol70-73mm cutout12/24VDC
SKU EV-ZB9030A-MW
$48.04 USD
Shipping calculated at checkout.
In stock
|

Overview

The occupancy sensor is a 4 in 1 device that combines occupancy sensing, daylight harvesting, 0-10V dimming and Zigbee radio circuits. When used with 0-10V LED drivers, it enables any lighting manufacturer to deliver wirelessly-controllable and sensor-equipped fixtures. The sensor is suitable for high bay applications which need large detection area and sensor based automation.

Features

  • Zigbee 3.0 compliant
  • Microwave motion detection, dual antennas, long detection range
  • Daylight harvesting
  • Works with 0-10V dim-to-off LED drivers
  • Autonomous sensor-based control
  • OTA firmware upgrade
  • Ceiling recessed installation
  • Can be use for indoor applications

Specifications

EV-ZB9030A-MWSpecifications from the official datasheetDownload datasheet PDF

Physical Information

Cutting Hole
70-73mm
Material / Color
ABS / White
Wire Gauge
26-16 AWG (0.2-1.3 mm2)
Strip Length
0.28-0.35 in. / 7-9 mm

Electrical Information

Input Voltage
12/24 VDC
Current Consumption
< 30mA (when dimming method = sink)
Dimming Control
Analog (0-10V)
Dimming Output
4mA (sink) / 20mA (source)
Status Indicators
Red (motion detection)

Wireless Communication

Radio Frequency
2.4 GHz
Wireless Protocol
Zigbee 3.0
Wireless Range
100 feet (30m) Line of Sight
Radio Certification
FCC/IC, CE

Lighting Control

Features
Continuous dimming, Individual/group addressing, Scene control, Task tuning (0-100%), Autonomous sensor-based control, Scheduler control

Environment

Operating Temperature Range
32˚F to 104˚F / 0˚C to 40˚C (indoor use only)
Operating Humidity
0-95% (non condensing)
Safety Certification
cULus Listed, CE

Sensing

Occupancy Sensing Type
Microwave sensor
Microwave High Frequency
5.8 GHz ±75 MHz ISM band
Detection Sensitivity
0-15 (0 is max sensitivity, 15 is min sensitivity)
Lux Detection Range
0-1000 Lux
Mounting Height
Recommended height: 10ft (3m)
Detection Angle
150° (wall), 360° (ceiling)
Sensing Information
Can be shared within Zigbee mesh network

Typical applications

  • Warehouses
  • Factories
  • Photo Controls
  • Central Management System

Downloads

FAQ

What is the ENVO ZigBee Ceiling Mounted Microwave Sensor, 0-10V Dimming used for?

This sensor is designed for indoor lighting control in commercial or professional settings where motion sensing and dimming are needed. It combines microwave motion detection, daylight harvesting, and autonomous sensor-based control to help reduce energy use while supporting code-compliant lighting strategies.

What lighting control method does this sensor support?

This model is built to work with 0-10V dim-to-off LED drivers. Its dimming output is rated at 4mA in sink mode and 20mA in source mode, making it suitable for low-voltage dimming control applications that use that standard.

Does this sensor use ZigBee, and what version does it support?

Yes. The EV-ZB9030A-MW is Zigbee 3.0 compliant, which helps it fit into Zigbee-based smart lighting and sensor ecosystems that support this type of device. It also supports OTA firmware upgrades and benefits from a robust mesh network architecture.

How does this model detect occupancy?

This sensor uses microwave motion detection and includes dual antennas for longer detection coverage. It also has a red status indicator that flashes when motion is detected.

Is this sensor suitable for indoor environments?

Yes, this model is intended for indoor applications. Its stated operating temperature range is 0°C to 40°C, which makes it appropriate for typical conditioned interior spaces.

What power input does the EV-ZB9030A-MW require?

The sensor operates on 12/24 VDC input voltage. Its current consumption is listed as less than 30mA when the dimming method is set to sink.

How does this model compare with a basic standalone motion sensor?

Compared with a basic motion-only sensor, this model adds Zigbee 3.0 wireless capability, daylight harvesting, and support for 0-10V dim-to-off LED drivers. That makes it a better fit for smart commercial lighting control where energy savings, automation, and platform compatibility matter.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Other Related Models

50 other models
ModelIP RatingDimmingLifetime
ENVO EV-SP-30-24US-TDM Triac Dimmable LED Driver 30W 24V 1.25A IP20 AC Phase Cut Dimming — View
ENVO EV-SL-150-24 Linear Type LED Driver 150W 24V 6.25A IP20 Non Dimmable — View
ENVO EV-SL-100-24 Linear Type LED Driver 100W 24V 4.16A IP20 Non Dimmable — View
ENVO ZigBee AC Phase Dimmer IP20 AC Phase Cut Dimming,Push Dimming,Zigbee — View
ENVO HydroLume LED Module Backlit — — — View
ENVO HydroLume LED Module Backlit - Triple LED IP67 Dimmable 50000h View
ENVO HydroLume LED Module Backlit - Double LED IP67 Dimmable 50000h View
ENVO HydroLume LED Module Backlit - Single LED IP67 Dimmable 50000h View
ENVO KVS-24096-A 96W 24V Non-Dimmable LED Driver 4A IP20 Non Dimmable — View
ENVO Zigbee Economic Single Colour Remote IP20 Zigbee — View
ENVO Zigbee Economic RGB+CCT Colour Remote IP20 Zigbee — View
ENVO EdgeLume LED Module Sidelit - Single LED IP67 Dimmable 50000h View
ENVO EdgeFlare LED Module Sidelit - Single LED IP67 Dimmable 50000h View
ENVO EdgeBlade LED Module Sidelit - Single LED IP67 Dimmable 50000h View
ENVO UltraFlare LED Module Backlit - Quad LED IP67 Dimmable 50000h View
ENVO UltraFlare LED Module Backlit - Triple LED IP67 Dimmable 50000h View
ENVO UltraFlare LED Module Backlit - Double LED IP67 Dimmable 50000h View
ENVO UltraFlare LED Module Backlit - Single LED IP67 Dimmable 50000h View
ENVO ProGlo LED Module Backlit - Quad LED IP67 Dimmable 50000h View
ENVO ProGlo LED Module Backlit - Triple LED IP67 Dimmable 50000h View
ENVO ProGlo LED Module Backlit - Duo LED IP67 Dimmable 50000h View
ENVO ProGlo LED Module Backlit - Single LED IP67 Dimmable 50000h View
ENVO OptiLume LED Module Backlit - Quad LED IP67 Dimmable 50000h View
ENVO OptiLume LED Module Backlit - Double LED IP67 Dimmable 50000h View
ENVO MiniLux LED Module Backlit - Triple LED IP67 Dimmable 50000h View
ENVO MiniLux LED Module Backlit - Duo LED IP67 Dimmable 50000h View
ENVO EcoGlo LED Module Backlit - Quad LED IP67 Dimmable 50000h View
ENVO EcoGlo LED Module Backlit - Triple LED IP67 Dimmable 50000h View
ENVO EcoGlo LED Module Backlit - Double LED IP67 Dimmable 50000h View
ENVO EcoGlo LED Module Backlit - Single LED IP67 Dimmable 50000h View
ENVO ChromaFlux LED Module Backlit - Triple LED IP65 Dimmable 50000h View
ENVO ChromaFlux LED Module Backlit - Triple LED IP65 Dimmable 50000h View
ENVO EV-SP-80-24US-TDM Triac Dimmable LED Driver 80W 24V 3.33A IP20 AC Phase Cut Dimming — View
ENVO EV-SP-80-12US-TDM Triac Dimmable LED Driver 80W 12V 6.67A IP20 AC Phase Cut Dimming — View
ENVO EV-SP-60-24US-TDM Triac Dimmable LED Driver 60W 24V 2.5A IP20 AC Phase Cut Dimming — View
ENVO EV-SP-60-12US-TDM Triac Dimmable LED Driver 60W 12V 5A IP20 AC Phase Cut Dimming — View
ENVO EV-SP-30-12US-TDM Triac Dimmable LED Driver 30W 12V 2.5A IP20 AC Phase Cut Dimming — View
ENVO EV-SNPV-60-24 LED Driver 60W 24V 2.5A IP20 Non Dimmable — View
ENVO EV-SNPV-60-12 LED Driver 60W 12V 5A IP20 Non Dimmable — View
ENVO EV-SNPV-40-24 LED Driver 40W 24V 1.67A IP20 Non Dimmable — View
ENVO EV-SNPV-40-12 LED Driver 40W 12V 3.33A IP20 Non Dimmable — View
ENVO EV-SL-60-24US Linear Type LED Driver 60W 24V 2.5A IP20 Non Dimmable — View
ENVO EV-SL-60-12US Linear Type LED Driver 60W 12V 5A IP20 Non Dimmable — View
ENVO EV-SL-150-48 Linear Type LED Driver 150W 48V 3.125A IP20 Non Dimmable — View
ENVO EV-SL-150-12 Linear Type LED Driver 150W 12V 11A IP20 Non Dimmable — View
ENVO EV-SL-100-48 Linear Type LED Driver 100W 48V 2.08A IP20 Non Dimmable — View
ENVO EV-SL-100-12 Linear Type LED Driver 100W 12V 8.33A IP20 Non Dimmable — View
ENVO EV-SE-75-24US LED Driver 75W 24V 3.125A IP20 Non Dimmable — View
ENVO EV-SE-75-12US LED Driver 75W 12V 6.25A IP20 Non Dimmable — View
ENVO EV-SE-50-24US LED Driver 50W 24V 2.08A IP20 Non Dimmable — View
View all 81 Series models
{ "id":9599230804288, "variants" :[{ "context":"default", "variant_id": 49718290514240, "sku":"EV-ZB9030A-MW", "inventory_qty" : 30, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$48.04\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
ENVO ZigBee Ceiling Mounted Microwave Sensor, 0-10V Dimming
Envo

ENVO ZigBee Ceiling Mounted Microwave Sensor, 0-10V Dimming

$48.04 USD

The occupancy sensor is a 4 in 1 device that combines occupancy sensing, daylight harvesting, 0-10V dimming and Zigbee radio circuits. When used with 0-10V LED drivers, it enables any lighting manufacturer to deliver wirelessly-controllable and sensor-equipped fixtures. The sensor is suitable for high bay applications which need large detection area and sensor based automation.

Features

  • Zigbee 3.0 compliant
  • Microwave motion detection, dual antennas, long detection range
  • Daylight harvesting
  • Works with 0-10V dim-to-off LED drivers
  • Autonomous sensor-based control
  • OTA firmware upgrade
  • Ceiling recessed installation
  • Can be use for indoor applications

Typical applications

  • Warehouses
  • Factories
  • Photo Controls
  • Central Management System
View product

  • Call us

    (888) 228 9138

  • Email us

    contact@wellforces.com

  • Business Hours

    Mon-Fri
    EST 9:00am-5:30pm

  • Wholesale and Trade Account

    Let's grow together
Back to top