Over 15 years experience of providing support of MEAN WELL Power Supplies
Loading...
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well HDP-190 Dual Output with PFC Function Switching Power Sup...
$59.38 USD
Unit price /
Unavailable
Overview
HDP-190 is the V1: +3.8V / V2: +2.8V output model of this series: rated current V1: 33A / V2: 20A, rated power 181.4W (typ.), 192W (max.), typical efficiency 86%.
Features
- Universal AC input / Full range
- Built-in active PFC function
- High efficiency up to 86%
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- 1U low profile 36mm
- Conformal coated
- ZVS technology to reduce power dissipation
- LED indicator for power on
- 3 years warranty
Specifications
HDP-190Specifications from the official datasheet (2024-01-08 edition)
OUTPUT
- OUTPUT NUMBER
- V1 / V2
- DC VOLTAGE
- V1: +3.8V / V2: +2.8V
- RATED CURRENT
- V1: 33A / V2: 20A
- CURRENT RANGE (max.)
- V1: 0 ~ 40A / V2: 0 ~ 22A
- RATED POWER
- 181.4W (typ.), 192W (max.)
- OUTPUT POWER (max.)
- 192W continue. V1 total power output shall not exceed 160W (max. 40A) ; V2 total power output shall not exceed 66W (max. 22A) (The V1 & V2 combine total power output shall not exceed 192W)
- RIPPLE & NOISE (max.)Note.2
- V1: 100mVp-p / V2: 100mVp-p
- VOLTAGE ADJ. RANGENote.6
- V1: 3.6 ~ 4V / V2: 2.5 ~ 3V
- VOLTAGE TOLERANCENote.3
- V1: ±2.0% / V2: ±2.0%
- LINE REGULATION
- V1: ±0.5% / V2: ±0.5%
- LOAD REGULATION
- V1: ±2.0% / V2: ±2.0%
- SETUP, RISE TIME
- 1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load
- HOLD UP TIME (Typ.)
- 16ms/230VAC 16ms/115VAC at full load
INPUT
- VOLTAGE RANGENote.5
- 90 ~ 264VAC 127 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- POWER FACTOR (Typ.)
- PF≧0.94/230VAC PF≧0.98/115VAC at full load
- EFFICIENCY (Typ.)
- 86%
- AC CURRENT (Typ.)
- 2.7A/115VAC 1.1A/230VAC
- INRUSH CURRENT (Typ.)
- 30A/115VAC 45A/230VAC
- LEAKAGE CURRENT
- <0.7mA / 240VAC
PROTECTION
- OVERLOAD
- V1+V2: 105 ~ 150% max. output power ; or V2: 125 ~ 170% rated current Protection type: Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE
- V1: 4.37 ~ 5.13V V2: 3.22 ~ 3.78V Protection type : Shut down o/p voltage, re-power on to recover
- OVER TEMPERATURE
- Shut down o/p voltage, re-power on to recovery
ENVIRONMENT
- WORKING TEMP.
- -30 ~ +70℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20 ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +85℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03%/℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note 4)
- SAFETY STANDARDS
- UL 62368-1, IEC/BS EN/EN 62368-1, EAC TP TC 004 approved; design refer to GB4943.1
- WITHSTAND VOLTAGE
- I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
- ISOLATION RESISTANCE
- I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55032 (CISPR32), class B, BS EN/EN61000-3-2,-3, EAC TP TC 020; design refer to GB17625.1,GB/T9254
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2, heavy industry level, EAC TP TC 020
OTHERS
- MTBF
- 1094.7K hrs min. Telcordia SR-332 (Bellcore) 112.2Khrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 215*115*36mm (L*W*H)
- PACKING
- 0.95Kg; 15pcs/15.3Kg/0.7CUFT
Test conditions and notes6
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
- 3. Tolerance : includes set up tolerance, line regulation and load regulation.
- 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
- 5. Derating may be needed under low input voltages. Please check the derating curve for more details.
- 6. Output voltage between V1 and V2 should be higher than 1.0V(V1-V2≧1.0V).
Technical drawings
Downloads
Datasheet1
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other HDP Series Models
50 other modelsPlease log in to write a review.
Write a review
Your rating
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
Thanks for your review!
It's published and now helps other buyers.
Review received
We're checking it and it'll appear shortly.
Couldn't submit your review
Please try again.
{
"id":8650200121664,
"variants" :[{
"context":"default",
"variant_id": 46614114206016,
"sku":"HDP-190",
"inventory_qty" : 0,
"customer" :true,
"custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$59.38\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e",
"volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e"
}
]
}
