Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
GST360A24-C6P is the 24V output model of this series: rated current 15A, typical efficiency 93%. Type C6P: Standard model, 6 pin connector for 24~55V.
GST360A is a highly reliable, 360W desktop style single-output green adaptor series. This product is a classⅠpower unit (with FG), equipped with a standard IEC320-C14 AC inlet and adopting the input range from 85 VAC to 264VAC. The entire series supplies different models with output voltages ranging between 12VDC and 55VDC that can satisfy the demands for various types of consumer electronic devices. With the efficiency up to 95.0% and the extremely low no-load power consumption below 0.5W, GST360A is compliant with USA EISA 2007/DoE,Canada NRCan. The supreme feature allows the adaptor to save the energy when it is either under the operating mode or the standby mode. The entire series utilizes the 94V-0 flame retardant plastic case. GST360A is certified for the international safety regulations.
Features
- Global certificates
- 450W peak power(3 sec.)
- Universal AC input / Full range
- 3 pole AC inlet IEC320-C14,ClassⅠpower unit
- Built-in active PFC function
- No load power consumption<0.5W
- Energy efficiency Level VI
- Comply with international energy-saving standards
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Fanless design with -30~+70℃ working temperature
- Fully enclosed plastic case
- LED indicator for power on
- 3 years warranty
Specifications
OUTPUT
- SAFETY MODEL NO.
- GST360A24
- DC VOLTAGENote.2
- 24V
- RATED CURRENT
- 15A
- CURRENT RANGE
- 0 ~ 15A
- POWER Rated (max.)
- 360W
- POWER Peak (3sec.)
- 450W
- RIPPLE & NOISE (max.)Note.3
- 200mVp-p
- VOLTAGE TOLERANCENote.4
- ±3.0%
- LINE REGULATIONNote.5
- ±1.0%
- LOAD REGULATION
- ±3.0%
- SETUP, RISE TIMENote.6
- 2000ms, 50ms / 230VAC 2000ms, 50ms / 115VAC at full load
- HOLD UP TIME (Typ.)
- 8ms / 230VAC 8ms / 115VAC at full load
INPUT
- VOLTAGE RANGENote.7
- 85 ~ 264VAC 120 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- POWER FACTOR (Typ.)
- PF>0.95 / 230VAC PF>0.98 / 115VAC at full load
- EFFICIENCY (Typ.)
- 93%
- AC CURRENT (Typ.)
- 3.8A / 115VAC 2A / 230VAC
- INRUSH CURRENT (max.)
- Cold start 95A / 115VAC 120A / 230VAC
- LEAKAGE CURRENT(max.)
- 1.5mA / 240VAC
PROTECTION
- OVERLOAD
- 135 ~ 155% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed for 12 ~ 36V Shut down o/p voltage, re-power on to recover for 48V and 55V
- OVER VOLTAGE
- 105 ~ 135% rated output voltage Protection type : Shut down o/p voltage, re-power on to recover
- OVER TEMPERATURE
- Shut down o/p voltage, re-power on to recover
ENVIRONMENT
- WORKING TEMP.
- -30 ~ +70℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +85℃, 10 ~ 95% RH non-condensing
- TEMP. COEFFICIENT
- ±0.03% / ℃ (0~40℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
- OPERATING ALTITUDENote. 8
- 5000 meters
- OVER VOLTAGE CATEGORY
- Ⅱ; According to UL62368-1, BS EN/EN62368-1; altitude up to 5000 meters
SAFETY & EMC (Note. 9)
- SAFETY STANDARDS
- UL62368-1, CSA C22.2 No.62368-1, Dekra BS EN/EN62368-1, BSMI CNS15598-1, CCC GB4943, AS/NZS 62368.1, PSE J62368-1, BIS IS13252, KC 62368-1, EAC TP TC 004 approved
- WITHSTAND VOLTAGE
- I/P-O/P: 3KVAC I/P-F/G: 2KVAC O/P-F/G: Short
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
-
Parameter Standard Test Level Conducted emission BS EN/EN55032(CISPR32),FCC PART 15 / CISPR22 CAN ICES-3(B)/NMB-3(B),CNS15936,GB17625.1 EAC TP TC 020,MSIP KN32 Class B Radiated emission BS EN/EN55032(CISPR32),FCC PART 15 / CISPR22 CAN ICES-3(B)/NMB-3(B),CNS15936,GB17625.1 EAC TP TC 020,MSIP KN32 Class B Harmonic current BS EN/EN61000-3-2,GB9254 Class A Voltage flicker BS EN/EN61000-3-3 - EMC IMMUNITY
-
Parameter Standard Test Level ESD BS EN/EN61000-4-2 Level 4, 15KV air; Level 4, 8KV contact RF field susceptibility BS EN/EN61000-4-3 Level 2, 3V/m EFT bursts BS EN/EN61000-4-4 Level 2, 1KV Surge susceptibility BS EN/EN61000-4-5 Level 3, 1KV/Line-Line , 2KV/Line-FG Conducted susceptibility BS EN/EN61000-4-6 Level 2, 3V Magnetic field immunity BS EN/EN61000-4-8 Level 2, 3A/m Voltage dips , interruption BS EN/EN61000-4-11 >95% dip 0. 5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS
- MTBF
- 2068.5K hrs min. Telcordia SR-332 (Bellcore) ; 269K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 220*95*46mm (L*W*H)
- PACKING
- 1.4Kg; 8pcs/12Kg/0.82CUFT
CONNECTOR
- PLUG
- See page 4 ; Other type available by customer requested
- CABLE
- See page 4 ; Other type available by customer requested
MODEL ENCODING
- C8P
- Standard model, 8 pin connector for 12~15V
- C6P (this model)
- Standard model, 6 pin connector for 24~55V
- Blank
- Other options available by customer requested (see Page 4)
Test conditions and notes9
- 1. All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient.
- 2. DC voltage: The output voltage set at point measure by plug terminal & 50% load.
- 3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μF & 47μF capacitor.
- 4. Tolerance: includes set up tolerance, line regulation, load regulation.
- 5. Line regulation is measured from low line to high line at rated load.
- 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
- 7. Derating may be needed under low input voltage. Please check the derating curve for more details.
- 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
- 9. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
Technical drawings
Typical applications
- Consumer electronic devices
- Telecommunication devices
- Office facilities
- Industrial equipments
- 3D printer
- Game console
- Vision mixer
- Power sourcing equipment of PoE
Downloads
FAQ
What are the main output specifications of the Mean Well GST360A24-C6P?
The GST360A24-C6P is a 360W AC-DC industrial adaptor with a 24V DC output. It is rated for up to 15A output current. This model is designed for higher-power equipment that requires a stable 24V desktop-style power supply.
What type of connector does the GST360A24-C6P use?
This model uses a C6P MOLEX 6 pin connector as its standard DC plug. It also includes a 100cm output cable specified as UL2464, 16AWG x 4C. Buyers who need a 6 pin connector format should verify that their equipment matches this model's connector style.
What input range does the Mean Well GST360A24-C6P support?
The adaptor accepts a universal AC input range of 85 to 264VAC, and it also supports 120 to 370VDC input. This wide range makes it suitable for use across different regions and electrical environments. It is built with a 3 pole IEC320-C14 AC inlet with an earth (FG) connection.
Is the GST360A24-C6P suitable for demanding industrial environments?
Yes, this model is built for industrial use with protections for overload, over voltage, and over temperature. It also operates across a wide working temperature range of -30°C to +70°C, subject to the output derating curve. Its 10 ~ 500Hz, 2G vibration rating and 5000 meter operating altitude also support reliable use in many commercial and industrial settings.
What efficiency and compliance features does this power adaptor offer?
The GST360A24-C6P has a typical efficiency of 93% and a typical power factor above 0.95 at 230VAC (above 0.98 at 115VAC). It also meets BS EN/EN61000-3-2 Class A harmonic current limits. These features make it a strong option for buyers looking for a high-power adaptor with modern energy-efficiency performance.
What safety and EMC approvals does the GST360A24-C6P have?
This model is approved to multiple safety standards including UL62368-1, CSA C22.2 No.62368-1, Dekra BS EN/EN62368-1, BSMI CNS15598-1, CCC GB4943, AS/NZS 62368.1, PSE J62368-1, BIS IS13252, KC 62368-1 and EAC TP TC 004. For EMC, it meets BS EN/EN55032 (CISPR32), FCC Part 15, CAN ICES-3(B), CNS15936 and GB17625.1 Class B, plus BS EN/EN61000-3-2 Class A and BS EN/EN61000-3-3. These approvals are useful for OEM and industrial buyers who need documented compliance coverage.
What kinds of applications is the GST360A24-C6P best suited for?
This 24V, 360W adaptor is best suited to industrial and commercial equipment that needs a high-power external AC-DC power source. Its 93% typical efficiency, high power factor, and 450W peak power capability for 3 seconds make it well suited to applications with demanding but controlled power requirements. It is generally chosen when a robust desktop adaptor format is preferred over an open-frame supply.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other GST360 Models
11 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.


