Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SP-200-13.5 Power Supply 200W 13.5V 14.9A

Name: Mean Well SP-200-13.5 Power Supply 200W 13.5V 14.9A
Brand: Mean Well
SKU: SP-200-13.5
Price: 47.76 USD
Availability: InStock

200W Single Output with PFC Function

SKU SP-200-13.5

$47.76 USD

Shipping calculated at checkout.

Select model — 2 in this family

SP-200-13.5

SP-75-13.5 75W 13.5V In stock$31.87 USD

SP-200-13.5 200W 13.5V Backorder$47.76 USD

Product variants

End of Life, Succeeded by RSP-200-13.5

Available to order

Overview

SP-200-13.5 is the 13.5V output model of this series: rated current 14.9A, rated power 201.1W, typical efficiency 84%.

Features

Universal AC input / full range
Built-in active PFC function, PF>0.93
Protections: Short circuit / Overload / Over voltage / Over temperature
Built-in cooling fan speed control
Built-in constant current limiting circuit
Built-in fan speed control
Remote ON-OFF control(Optional)
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at PFC:67KHz PWM:134KHz
3 years warranty

Specifications

SP-200-13.5Specifications from the official datasheet (2021-09-15 edition)Download datasheet PDF

OUTPUT

DC VOLTAGE: 13.5V
RATED CURRENT: 14.9A
CURRENT RANGE: 0 ~ 14.9A
RATED POWER: 201.1W
RIPPLE & NOISE (max.)^Note.2: 100mVp-p
VOLTAGE ADJ. RANGE: 12.8 ~ 14.9V
VOLTAGE TOLERANCE^Note.3: ±2.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±0.5%
SETUP, RISE TIME: 600ms, 40ms at full load
HOLD UP TIME (Typ.): 20ms at full load

INPUT

VOLTAGE RANGE: 85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.93/230VAC PF>0.97/115VAC at full load
EFFICIENCY (Typ.): 84%
AC CURRENT (Typ.): 3.5A/115VAC 1.7A/230VAC
INRUSH CURRENT (Typ.): COLD START 50A/230VAC
LEAKAGE CURRENT: <2mA / 240VAC

PROTECTION

OVERLOAD: 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE: 14.85 ~ 18.2V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

REMOTE CONTROL(OPTION): CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF

ENVIRONMENT

WORKING TEMP.: -10 ~ +60℃ (Refer to output load derating curve)
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -20 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.05%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC (Note 4)

SAFETY STANDARDS: UL60950-1, CCC GB4943 approved
WITHSTAND VOLTAGE: I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/70% RH
EMC EMISSION: Compliance to EN55032 (CISPR32) Class B,EN61000-3-2,-3
EMC IMMUNITY: Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A

OTHERS

MTBF: 183.8K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 199*99*50mm (L*W*H)
PACKING: 0.85Kg; 20pcs/17.9Kg/1.21CUFT

Test conditions and notes4

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)

Technical drawings

SP-200-13.5 Mechanical Specification — Mechanical Specification

SP-200-13.5 Block Diagram — Block Diagram

SP-200-13.5 Derating Curve — Derating Curve

Downloads

Datasheet1

SP-200-13.5 datasheetSP_200_spec.pdf · 2021-09-15 edition PDF Download

FAQ

Can I use the SP-200-13.5 for 13.5V communications or control equipment?

Yes, it is a constant-voltage 13.5V power supply rated for 201.1W and 14.9A. That makes it suitable for 13.5V equipment in industrial or electronic systems that need a fixed 13.5V source within those limits.

Is the SP-200-13.5 appropriate for a 13.5V bench setup or electronics test station?

It can be used where the DUT or fixture requires constant 13.5V and the load stays at or below 14.9A. The 201.1W capacity provides more output than smaller 13.5V models in the same series.

Would this power supply fit a 13.5V battery-replacement or fixed-voltage electronics application?

It is intended for fixed 13.5V DC loads, not variable-output use. For equipment designed around 13.5V input, the SP-200-13.5 can support up to 201.1W total load.

Can the SP-200-13.5 be used in an OEM enclosure for 13.5V subsystems?

Yes, if the subsystem requires a constant 13.5V supply and remains within 14.9A output current. Its 85-264VAC input range also supports deployment in equipment used across different AC mains ranges.

Is the SP-200-13.5 for indoor only, or can it go outside?

The temperature spec is -10°C to +60°C, which defines the stated operating range. No IP rating appears in the provided data, so outdoor exposure or wet-location suitability is not established by these specs.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":8650771169600, "variants" :[{ "context":"default", "variant_id": 46615906386240, "sku":"SP-200-13.5", "inventory_qty" : 0, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$47.76\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well SP-200-13.5 Power Supply 200W 13.5V 14.9A

Select model — 2 in this family

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION

FUNCTION

ENVIRONMENT

SAFETY & EMC (Note 4)

OTHERS

Technical drawings

Downloads

Datasheet1

FAQ

Payment & Security

Write a review

Your cart

Mean Well SP-200-13.5 Power Supply 200W 13.5V 14.9A

Features

Company Information

Services and Support

Choose options