☎ (888) 228 9138

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well SP-100-24 Power Supply 100W 24V 4.2A

SKU SP-100-24
$36.72 USD
Shipping calculated at checkout.

Select model — 4 in this family

SP-100-24
End of Life, Succeeded by RSP-100-24
Available to order
|

Overview

SP-100-24 is the 24V output model of this series: rated current 4.2A, rated power 100.8W, typical efficiency 87%.

Features

  • Universal AC input / full range
  • Built-in active PFC function, PF>0.93
  • Protections: Short circuit / Overload / Over voltage
  • Built-in constant current limiting circuit
  • Remote ON-OFF control(Optional)
  • LED indicator for power on
  • 100% full load burn-in test
  • Fixed switching frequency at PFC:67KHz PWM:134KHz
  • 3 years warranty

Specifications

SP-100-24Specifications from the official datasheet (2021-09-15 edition)Download datasheet PDF

OUTPUT

DC VOLTAGE
24V
RATED CURRENT
4.2A
CURRENT RANGE
0 ~ 4.2A
RATED POWER
100.8W
RIPPLE & NOISE (max.)Note.2
150mVp-p
VOLTAGE ADJ. RANGE
22.8 ~ 26.4V
VOLTAGE TOLERANCENote.3
±1.0%
LINE REGULATION
±0.5%
LOAD REGULATION
±0.5%
SETUP, RISE TIME
600ms, 30ms at full load
HOLD UP TIME (Typ.)
20ms at full load

INPUT

VOLTAGE RANGE
85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.93/230VAC PF>0.97/115VAC at full load
EFFICIENCY (Typ.)
87%
AC CURRENT (Typ.)
1.7A/115VAC 0.8A/230VAC
INRUSH CURRENT (Typ.)
COLD START 35A/230VAC
LEAKAGE CURRENT
<2mA / 240VAC

PROTECTION

OVERLOAD
105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE
26.4 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover

FUNCTION

REMOTE CONTROL(OPTION)
CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF

ENVIRONMENT

WORKING TEMP.
-10 ~ +60℃ (Refer to output load derating curve)
WORKING HUMIDITY
20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-20 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.05%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
UL60950-1 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
EMC EMISSION
Compliance to EN55032 (CISPR32) Class B,EN61000-3-2,-3
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A

OTHERS

MTBF
211.3K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
179*99*45mm (L*W*H)
PACKING
0.66Kg; 20pcs/14.3Kg/1.17CUFT
Test conditions and notes4
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)

Technical drawings

SP-100-24 Mechanical Specification
Mechanical Specification
SP-100-24 Block Diagram
Block Diagram
SP-100-24 Derating Curve
Derating Curve

Downloads

FAQ

Can I use the SP-100-24 for a 24V PLC or industrial control panel?

Yes, if the control system requires a 24V constant-voltage supply and the total load stays within 4.2A and 100.8W. That makes it suitable for many 24V industrial control, automation, and embedded panel applications that run from a universal 85-264VAC input.

Is the SP-100-24 suitable for 24V sensors, relays, and HMI-related control loads?

It can be a fit for grouped 24V control loads when the combined demand does not exceed 4.2A or 100.8W. Because it is a constant-voltage model, it is intended for equipment designed to run from a regulated 24V rail.

Can this 24V power supply be used for embedded or automation test benches?

Yes, for embedded or automation benches built around a 24V DC bus, provided the load remains within 100.8W and 4.2A. Its 85-264VAC input also makes it practical in labs or service areas where the AC source may vary.

Is the SP-100-24 meant for outdoor or harsh-environment use?

The listed specs include an operating temperature range of -10°C to +60°C, but no IP rating is provided. Based on the published specs, it is better treated as an indoor power supply unless the final enclosure provides the required environmental protection.

How does the SP-100-24 compare with nearby 24V models in the SP series?

Within the listed siblings, the SP-100-24 is 100.8W at 24V and 4.2A, the SP-150-24 is 151.2W at 24V and 6.3A, the SP-200-24 is 200W at 24V and 8.4A, and the SP-480-24 is 480W at 24V and 20A. The main differences are available output power and current at the same 24V output.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8650767302976, "variants" :[{ "context":"default", "variant_id": 46615884169536, "sku":"SP-100-24", "inventory_qty" : 0, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$36.72\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SP-100-24 Power Supply 100W 24V
Mean Well

Mean Well SP-100-24 Power Supply 100W 24V 4.2A

$36.72 USD

SP-100-24 is the 24V output model of this series: rated current 4.2A, rated power 100.8W, typical efficiency 87%.

Features

  • Universal AC input / full range
  • Built-in active PFC function, PF>0.93
  • Protections: Short circuit / Overload / Over voltage
  • Built-in constant current limiting circuit
  • Remote ON-OFF control(Optional)
  • LED indicator for power on
  • 100% full load burn-in test
  • Fixed switching frequency at PFC:67KHz PWM:134KHz
  • 3 years warranty

Model

  • 100W 24V
  • 150W 24V
  • 200W 24V
  • 480W 24V
View product

  • Call us

    (888) 228 9138

  • Email us

    contact@wellforces.com

  • Business Hours

    Mon-Fri
    EST 9:00am-5:30pm

  • Wholesale and Trade Account

    Let's grow together
Back to top