Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well RSP-150-13.5 Power Supply 150W 13.5V 11.2A

1U low profile with active PFChigh efficiency
SKU RSP-150-13.5
$47.55 USD
Shipping calculated at checkout.
Model

Select model — 5 in this family

RSP-150-13.5
In stock
|

Overview

RSP-150-13.5 is the 13.5V output model of this series: rated current 11.2A, rated power 151.2W, typical efficiency 87.5%.

RSP-150 is a 150W single output enclosed type AC/DC power supply. This series operates for 85~264VAC input voltage and offers the models with the DC output mostly demanded from the industry. Each model is cooled by free air convection , working for the temperature up to 70℃.

Features

  • Universal AC input / Full range
  • Built-in active PFC function
  • High efficiency up to 90%
  • Cooling by free air convection
  • Built-in remote ON-OFF control
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • LED indicator for power on
  • Operating altitude up to 5000 meters (see OVER VOLTAGE CATEGORY)
  • 3 years warranty

Specifications

RSP-150-13.5Specifications from the official datasheet (2025-09-22 edition)

OUTPUT

DC VOLTAGE
13.5V
RATED CURRENT
11.2A
CURRENT RANGE
0 ~ 11.2A
RATED POWER
151.2W
RIPPLE & NOISE (max.)Note.2
100mVp-p
VOLTAGE ADJ. RANGE
12.8 ~ 14.9V
VOLTAGE TOLERANCENote.3
±2.0%
LINE REGULATION
±0.5%
LOAD REGULATION
±0.5%
SETUP, RISE TIME
600ms, 30ms at full load
HOLD UP TIME (Typ.)
16ms at full load

INPUT

VOLTAGE RANGENote.5
85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.93/230VAC PF>0.98/115VAC at full load
EFFICIENCY (Typ.)
87.5%
AC CURRENT (Typ.)
1.6A/115VAC 0.8A/230VAC
INRUSH CURRENT (Typ.)
COLD START 45A/230VAC
LEAKAGE CURRENT
<2mA / 240VAC

PROTECTION

OVERLOAD
105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE
14.85 ~ 18.2V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

REMOTE CONTROL
CN1: < 0~0.8VDC POWER ON , 4~10VDC POWER OFF

ENVIRONMENT

WORKING TEMP.
-30 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT
±0.05%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
OVER VOLTAGE CATEGORY
Ⅲ; According to EN61558, EN50178,EN60664-1, EN62477-1 ; altitude up to 2000 meters Ⅱ; According to UL/IEC/EN 62368; altitude up to 5000 meters

SAFETY & EMC (Note 4)

SAFETY STANDARDS
UL62368-1, TUV BS EN/EN62368-1, BS EN/EN61558-1, BS EN/EN61558-2-16, EAC TP TC 004, CCC GB4943.1, BSMI CNS15598-1, AS/NZS 62368.1, IS13252(Part1)/IEC60950-1(except for 7.5V,13.5V,48V)approved
WITHSTAND VOLTAGE
I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020, GB9254 Class B, GB17625.1,CNS15936 Class B
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level, EAC TP TC 020

OTHERS

MTBF
2253.9K hrs min. Telcordia SR-332 (Bellcore) ; 290.7K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
199*99*30mm (L*W*H)
PACKING
0.6Kg; 24pcs/15.4Kg/0.89CUFT
Test conditions and notes7
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
  5. 5. Derating may be needed under low input voltages. Please check the derating curve for more details.
  6. 6. Strongly recommended that external output capacitance should not exceed 5000uF. (Only for: RSP-150-3.3/-5/-7.5/-12)
  7. 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

Technical drawings

RSP-150-13.5 Mechanical Specification
Mechanical Specification
RSP-150-13.5 Block Diagram
Block Diagram
RSP-150-13.5 Derating Curve
Derating Curve

Typical applications

  • Factory control or automation apparatus
  • Test and measurement instrument
  • Laser related machine
  • Burn-in facility
  • RF application

Downloads

FAQ

When would a designer choose the RSP-150-13.5 over the RSP-150-12 or RSP-150-15?

The RSP-150-13.5 provides 13.5V at 11.2A (151.2W), positioned between the 12V (12.5A) and 15V (10A) options. A 13.5V output is appropriate for battery float charging of 12V lead-acid batteries, certain motor controllers with mid-range voltage requirements, and telecom auxiliary circuits that specify a 13.5V nominal supply.

Can the RSP-150-13.5 operate in an outdoor enclosure in a cold climate?

The RSP-150-13.5 is rated from -30°C to +70°C ambient (with derating per the derating curve) and 20–90% RH non-condensing. No IP ingress rating is specified, so it must not be exposed outdoors; any enclosure must keep it dry and non-condensing. The -30°C lower limit supports cold-climate operation when the enclosure maintains this minimum.

What certifications does the RSP-150-13.5 hold?

The RSP-150-13.5 is approved to UL62368-1, TÜV BS EN/EN62368-1, BS EN/EN61558-1 and BS EN/EN61558-2-16, EAC TP TC 004, CCC GB4943.1, BSMI CNS15598-1 and AS/NZS 62368.1. This covers North America, Europe, the Eurasian Economic Union, China, Taiwan and Australia/New Zealand.

What is the form factor of the RSP-150-13.5 and is it rack-mountable?

The RSP-150-13.5 is an enclosed unit measuring 199.0 × 99.0 × 30.0 mm and weighing 0.6 kg. It mounts with M4 screws (2 holes on the base, 4 on the sides); the datasheet does not specify rack mounting.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Other RSP-150 Models

1 other model
ModelPowerVoltageCurrent
Mean Well RSP-150-27 Power Supply 150W 27V 5.6A 151.2W 27V 5.6A View
{ "id":8650684498240, "variants" :[{ "context":"default", "variant_id": 46615658987840, "sku":"RSP-150-13.5", "inventory_qty" : 8, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$47.55\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well RSP-150-13.5 Power Supply 150W 13.5V 11.2A
Mean Well

Mean Well RSP-150-13.5 Power Supply 150W 13.5V 11.2A

$47.55 USD

RSP-150-13.5 is the 13.5V output model of this series: rated current 11.2A, rated power 151.2W, typical efficiency 87.5%.

RSP-150 is a 150W single output enclosed type AC/DC power supply. This series operates for 85~264VAC input voltage and offers the models with the DC output mostly demanded from the industry. Each model is cooled by free air convection , working for the temperature up to 70℃.

Features

  • Universal AC input / Full range
  • Built-in active PFC function
  • High efficiency up to 90%
  • Cooling by free air convection
  • Built-in remote ON-OFF control
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • LED indicator for power on
  • Operating altitude up to 5000 meters (see OVER VOLTAGE CATEGORY)
  • 3 years warranty

Typical applications

  • Factory control or automation apparatus
  • Test and measurement instrument
  • Laser related machine
  • Burn-in facility
  • RF application

Model

  • 75W 13.5V
  • 100W 13.5V
  • 150W 13.5V
  • 200W 13.5V
  • 320W 13.5V
View product