Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well PLN-60-27 Power Supply 60W 27V - IP64 2.3A

Name: Mean Well PLN-60-27 Power Supply 60W 27V - IP64 2.3A
Brand: Mean Well
SKU: PLN-60-27
Price: 43.22 USD
Availability: InStock

fully isolated plastic caseIP64suitable for signage applications

SKU PLN-60-27

$43.22 USD

Shipping calculated at checkout.

In stock

Overview

PLN-60-27 is the 27V output model of this series: rated current 2.3A, rated power 62.1W, typical efficiency 88%.

Features

Universal AC input / Full range (up to 295VAC)
High efficiency 89%
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit with adjustable OCP level
Fully isolated plastic case with IP64 level
Built-in active PFC function
Pass LPS
Class 2 power unit
100% full load burn-in test
High reliability
Suitable for LED lighting and moving sign applications (Note.2)
Suitable for dry / damp locations
Compliance to worldwide safety regulations for lighting
2 years warranty

Specifications

PLN-60-27Specifications from the official datasheet (2026-02-09 edition)

OUTPUT

DC VOLTAGE: 27V
CONSTANT CURRENT REGION^Note.6: 18.9 ~27V
RATED CURRENT: 2.3A
CURRENT RANGE: 0 ~ 2.3A
RATED POWER: 62.1W
RIPPLE & NOISE (max.)^Note.2: 2.7Vp-p
VOLTAGE ADJ. RANGE^Note.5: 25 ~ 30V
VOLTAGE ADJ. RANGE^Note.5: Can be adjusted by internal potentiometer SVR1
CURRENT ADJ. RANGE^Note.5: 3% ~ -25%. Can be adjusted by internal potentiometer SVR2
VOLTAGE TOLERANCE^Note.3: ±10%
LINE REGULATION: ±3.0%
LOAD REGULATION: ±5.0%
SETUP TIME: 500ms / 230VAC 3000ms / 115VAC at full load

INPUT

VOLTAGE RANGE^Note.4: 90 ~ 295VAC 127 ~ 417VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.92/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION: THD< 20% when output loading≧75% at 115VAC/230VAC input and output loading≧80% at 277VAC input
EFFICIENCY (Typ.): 88%
AC CURRENT (Typ.): 0.8A/115VAC 0.4A/230VAC 0.3A/277VAC
INRUSH CURRENT (Typ.): COLD START 35A(twidth=45μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.75mA / 240VAC

PROTECTION

OVER CURRENT: 95 ~ 110%
OVER CURRENT: Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT: Hiccup mode, recovers automatically after fault condition is removed.
OVER VOLTAGE: 31 ~ 35V
OVER VOLTAGE: Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.: -30 ~ +50℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: UL879, UL1310, UL8750, CSA C22.2 No. 207-M89(except for 48V), TUV BS EN/EN61347-1, BS EN/EN61347-2-13 independent, CAN/CSA C22.2 No. 223-M91 (except for 48V), CSA C22.2 No. 250.0-08(except for 48V), EAC TP TC 004, IP64 approved ; design refer to UL60950-1
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (≧75% load) ; BS EN/EN61000-3-3; EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024,BS EN/EN61547, light industry level, EAC TP TC 020

OTHERS

MTBF: 3445.2K hrs min. Telcordia SR-332 (Bellcore) ; 497.9Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 181*61.5*35mm (L*W*H)
PACKING: 0.5Kg; 24pcs/13Kg/0.87CUFT

Certifications & ratings

Marked features: LPS

Test conditions and notes13

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. Output voltage can be adjusted through the SVR1 on the PCB ; limit of output constant current level can be adjusted through the SVR2 on the PCB.
6. Please refer to "DRIVING METHODS OF LED MODULE".
7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
8. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
9. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
10.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
11. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
12. PLN-60-12 is used for any light source that exempt from the ErP-Directive (EU) 2019/2020 requirement, for example this model could be use for signalling products (including, but not limited to road-, railway-, marineorair traffic-signalling , traffic control or airfield lamps).
13. This product is not suitable for LED lighting applications in China.(It is recommended to use the LPF/NPF/XLG/XLC/XLN series in China

Technical drawings

PLN-60-27 Mechanical Specification — Mechanical Specification

PLN-60-27 Derating Curve — Derating Curve

PLN-60-27 Power Factor Characteristic — Power Factor Characteristic

PLN-60-27 EFFICIENCY vs LOAD (48V Model) — EFFICIENCY vs LOAD (48V Model)

Downloads

Datasheet1

PLN-60-27 datasheetPLN-60-SPEC.PDF · 2026-02-09 edition PDF Download

Certificates6

EMC Certificate(PLN-60)(EN) PDF Download

CB Certificate(PLN-60)(EN) PDF Download

TUV Certificate(PLN-60)(EN) PDF Download

UL(e307078) Certificate(PLN-60)(EN) PDF Download

UL(e334687) Certificate(PLN-60)(EN) PDF Download

UL(e320521) Certificate (PLN-60)(EN) PDF Download

Catalogues1

Mean Well LED Driver Catalog PDF Download

FAQ

Can I use the PLN-60-27 for LED signage modules?

Yes, this model can be used for signage when the LED load is designed for constant-current operation in the 18.9-27V range. It delivers up to 2.3A and 62.1W, so the sign modules need to stay within those output limits.

Is the PLN-60-27 suitable for 27V constant-current linear lighting?

It can be a fit for linear lighting that uses a constant-current LED engine operating within the 18.9-27V CC voltage range. The driver provides 27V nominal output and 2.3A output current, so the fixture needs to match that operating window.

Can this driver power a 27V LED strip or tape light?

Only if the strip is specifically designed for constant-current 27V operation and falls within the 18.9-27V CC range. For sizing, the maximum load is 62.1W, so estimated strip length = 62.1W divided by your strip's rated power per meter; check your strip rated power per meter before sizing.

Can I use the PLN-60-27 in outdoor sign boxes or damp locations?

Its IP64 rating makes it suited to dusty areas and locations where splashing water is expected, such as protected outdoor signage enclosures. It is not the right choice for submersion or applications that require a higher water-ingress rating than IP64.

Is the PLN-60-27 a good match for enclosed display or accent lighting systems?

It can work well in enclosed display or accent lighting systems that use constant-current LEDs within the 18.9-27V range. The IP64 case, 90-295VAC input, and operating range of -30°C to +50°C make it practical for a wide range of indoor or sheltered commercial lighting environments.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":8650624270656, "variants" :[{ "context":"default", "variant_id": 46615463461184, "sku":"PLN-60-27", "inventory_qty" : 7, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$43.22\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well PLN-60-27 Power Supply 60W 27V - IP64 2.3A

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION

ENVIRONMENT

SAFETY & EMC

OTHERS

Certifications & ratings

Technical drawings

Downloads

Datasheet1

Certificates6

Catalogues1

FAQ

Payment & Security

Write a review

Your cart

Mean Well PLN-60-27 Power Supply 60W 27V - IP64 2.3A

Features

Company Information

Services and Support

Choose options