☎ (888) 228 9138

Over 15 years experience of providing support of MEAN WELL Power Supplies

1 5

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well LPF-16D-15 Power Supply 16W 15V - Dimmable 1.07A

fully isolated plastic caseIP67Class II design without FGbuilt-in 3 in 1 dimming
SKU LPF-16D-15
$27.37 USD
Shipping calculated at checkout.

Select model — 10 in this family

LPF-16D-15
In stock
|

Overview

LPF-16D-15 is the 15V output model of this series: rated current 1.07A, rated power 16.05W, typical efficiency 83%.

LPF-16D series is a 16W AC/DC LED driver featuring the constant current output. LPF-16D operates from 90～305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the efficiency up to 85%, with the fanless design, the entire series is able to operate for -35℃ ~ +70℃ case temperature under free air convection. The entire series is suitable to work for a variety of applications at dry or damp and the optional models with IP67 rating is able to further work at wet locations. LPF-16D is equipped with the 3 in 1 dimming function so as to provide the design flexibility for LED lighting system.

Features

  • Constant current mode output
  • Plastic housing with Class II design
  • Built-in active PFC function
  • Class 2 power unit
  • Standard type with IP30 level,optional IP67 with fully encapsulate
  • Function: 3 in 1 dimming
  • Typical lifetime>50000 hours
  • 5 years warranty

Specifications

LPF-16D-15Specifications from the official datasheet (2026-02-09 edition)

OUTPUT

DC VOLTAGE
15V
RATED CURRENT
1.07A
RATED POWERNote.5
16.05W
CONSTANT CURRENT REGIONNote.2
8.25 ~ 15V
CURRENT RIPPLE
5.0% max. @rated current
CURRENT TOLERANCE
±5.0%
SETUP, RISE TIMENote.6
1500ms, 80ms / 115VAC 500ms, 80ms / 230VAC
HOLD UP TIME (Typ.)
16ms/230VAC 16ms/115VAC

INPUT

VOLTAGE RANGENote.5
90 ~ 305VAC 127 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION
THD< 20%(@load≧60%/115VC,230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY (Typ.)
83%
AC CURRENT
0.4A / 115VAC 0.25A / 230VAC 0.2A/277VAC
INRUSH CURRENT(Typ.)
COLD START 45A(twidth=200μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER
14 units (circuit breaker of type B) / 24 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 240VAC

PROTECTION

OVER CURRENT
95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed.
OVER VOLTAGE
17.5 ~ 21V Shut down and latch off o/p voltage, re-power on to recover
OVER TEMPERATURE
Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.
Tcase=-35 ~ +70℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.
Tcase=+70℃
WORKING HUMIDITY
20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDSNote.8
UL8750, CSA C22.2 No. 250.0-08, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent,BS EN/EN62384, EAC TP TC 004,GB/T19510.1,GB/T19510.213 approved, IP67(optional); Design refer to UL60950-1
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSIONNote.8
Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@load≧55%) ; BS EN/EN61000-3-3,GB/T 17743 , GB17625.1, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020

OTHERS

MTBF
3572.8K hrs min. Telcordia SR-332 (Bellcore) ; 391.6Khrs min. MIL-HDBK-217F (25℃)
DIMENSION
148*40*32mm (L*W*H)
PACKING
0.21Kg;40pcs/9.4Kg/ 1.02CUFT
Test conditions and notes12
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
  2. 2. Please refer to "DRIVING METHODS OF LED MODULE".
  3. 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  4. 4. Tolerance : includes set up tolerance, line regulation and load regulation.
  5. 5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
  6. 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
  7. 7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
  8. 8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.
  9. 9. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70℃ or less.
  10. 10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
  11. 11. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
  12. 12. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf

Technical drawings

LPF-16D-15 BLOCK DIAGRAM
BLOCK DIAGRAM
LPF-16D-15 DIMMING OPERATION
DIMMING OPERATION
LPF-16D-15 Illustration (page 5)
Illustration (page 5)
LPF-16D-15 STATIC CHARACTERISTIC
STATIC CHARACTERISTIC
LPF-16D-15 TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION
LPF-16D-15 Recommend Mounting Direction
Recommend Mounting Direction

Typical applications

  • LED downlight
  • LED spotlight
  • LED decorative lighting
  • LED tunnel lighting

Downloads

FAQ

Can I use the LPF-16D-15 for dimmable 15V LED strip lighting?

Yes, if the LED strip or light engine is designed for constant-current operation at 1.07A and stays within the 8.25-15V range. The driver provides up to 16.05W and includes built-in 3 in 1 dimming for smaller dimmable loads.

Is this driver suitable for dimmable shelf, display, or cabinet lighting?

It can be, as long as the LED load requires 1.07A constant current and its forward voltage is between 8.25V and 15V. With a 16.05W output, it fits compact dimmable display and cabinet lighting assemblies.

Can the LPF-16D-15 be used for small dimmable signage lighting?

Yes, for small signage lighting that uses a constant-current LED load at 1.07A. The total load must remain within 16.05W and the 8.25-15V constant-current range.

Would this work for outdoor dimmable accent lighting at 15V?

Not as standard: the driver is rated IP30, so it is not intended for outdoor or wet conditions; IP67 is listed only as an option. Its case temperature (Tcase) range is -35°C to +70°C, and the LED load must match the 1.07A constant-current output and 8.25-15V range.

How much 15V LED strip can the LPF-16D-15 support?

Estimate the length with: maximum strip length = 16.05W divided by your strip's rated watts per meter. Since this is a constant-current driver at 1.07A with an 8.25-15V range, check your strip rated power per meter and confirm it is designed for this constant-current output.

Is the LPF-16D-15 okay for wet locations or exposed installations?

Not as standard: the housing is rated IP30, so it is not intended for wet or exposed locations; IP67 is listed as an optional version. It is rated for a case temperature (Tcase) of -35°C to +70°C.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8650452009280, "variants" :[{ "context":"default", "variant_id": 46614888939840, "sku":"LPF-16D-15", "inventory_qty" : 6, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$27.37\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well LPF-16D-15 Power Supply 16W 15V - Dimmable 1.07A
Mean Well

Mean Well LPF-16D-15 Power Supply 16W 15V - Dimmable 1.07A

$27.37 USD

LPF-16D-15 is the 15V output model of this series: rated current 1.07A, rated power 16.05W, typical efficiency 83%.

LPF-16D series is a 16W AC/DC LED driver featuring the constant current output. LPF-16D operates from 90～305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the efficiency up to 85%, with the fanless design, the entire series is able to operate for -35℃ ~ +70℃ case temperature under free air convection. The entire series is suitable to work for a variety of applications at dry or damp and the optional models with IP67 rating is able to further work at wet locations. LPF-16D is equipped with the 3 in 1 dimming function so as to provide the design flexibility for LED lighting system.

Features

  • Constant current mode output
  • Plastic housing with Class II design
  • Built-in active PFC function
  • Class 2 power unit
  • Standard type with IP30 level,optional IP67 with fully encapsulate
  • Function: 3 in 1 dimming
  • Typical lifetime>50000 hours
  • 5 years warranty

Typical applications

  • LED downlight
  • LED spotlight
  • LED decorative lighting
  • LED tunnel lighting

Model

  • 16W 15V
  • 16W 15V Dimmable
  • 25W 15V
  • 25W 15V Dimmable
  • 40W 15V
  • 40W 15V Dimmable
  • 60W 15V
  • 60W 15V Dimmable
  • 75W 15V
  • 75W 15V Dimmable
View product

  • Call us

    (888) 228 9138

  • Email us

    contact@wellforces.com

  • Business Hours

    Mon-Fri
    EST 9:00am-5:30pm

  • Wholesale and Trade Account

    Let's grow together
Back to top