Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well EPP-200-48 Power Supply 144W 48V 3A

4" x 2"high efficiency up to 92%economical PFCno load power consumption<0.5W
SKU EPP-200-48
$52.19 USD
Shipping calculated at checkout.
In stock
|

Overview

EPP-200-48 is the 48V output model of this series: typical efficiency 94%.

EPP-200 is a 200W highly reliable green PCB type power supply with a high power density (21.9W/in³) on the 4" by 2" footprint. It accepts 80~264VAC input and offers various output voltages between 12V and 48V. The working efficiency is up to 94% and the extremely low no load power consumption is down below 0.5W. EPP-200 is able to be used for both ClassⅠ(with FG) and Class Ⅱ(no FG) system design. EPP-200 is equipped with complete protection functions; it is complied with the international safety regulations such as TUV BS EN/EN62368-1, UL62368-1 and IEC62368-1. EPP-200 series serves as a high price-to-performance power supply solution for various industrial applications.

Features

  • 4"×2" miniature size
  • Universal AC input / Full range
  • Built-in active PFC function
  • EMI Conduction for Class B Radiation for Class B with FG(ClassⅠ) and Class A without FG(ClassⅡ)
  • No load power consumption<0.5W
  • High efficiency up to 94%
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Cooling by free air convection for 140W and 200W with 10CFM forced air
  • Built-in 12V/0.5A FAN supply
  • LED indicator for power on
  • Operating altitude up to 5000 meters
  • 3 years warranty

Specifications

EPP-200-48Specifications from the official datasheet (2026-03-31 edition)

OUTPUT

DC VOLTAGE
48V
CURRENT 10CFM
4.2A
CURRENT Convection
3A
RATED POWER 10CFM
201.6W
RATED POWER Convection
144W
RIPPLE & NOISE (max.)Note.2
200mVp-p
VOLTAGE ADJ. RANGE
45.6 ~50.4V
VOLTAGE TOLERANCENote.3
±1.0%
LINE REGULATION
±0.5%
LOAD REGULATION
±1.0%
SETUP, RISE TIME
500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)
12ms/230VAC 12ms/115VAC at full load

INPUT

VOLTAGE RANGENote.4
80 ~ 264VAC 113 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR
PF>0.94/230VAC PF>0.98/115VAC at full load
EFFICIENCY (Typ.)
94%
AC CURRENT (Typ.)
1.8A/115VAC 1A/230VAC
INRUSH CURRENT (Typ.)
COLD START 30A/115VAC 60A/230VAC
LEAKAGE CURRENT
<0.75mA / 240VAC

PROTECTION

OVERLOAD
110 ~ 140% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
52.8 ~ 62.4V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE
Protection type : Shut down o/p voltage, re-power on to recover

FUNCTION

FAN SUPPLY
12V@0.5A for driving a fan ; tolerance +15% ~ -15% at main output 20% rated current (10CFM)

ENVIRONMENT

WORKING TEMP.
-30 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
OPERATING ALTITUDENote.6
5000 meters
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC (Note 5)

SAFETY STANDARDS
UL62368-1, TUV BS EN/EN62368-1, IEC62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55032 (CISPR32) Conduction for Class B Radiation for Class B with FG(ClassⅠ) and Class A without FG(ClassⅡ), BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2, heavy industry level, criteria A, EAC TP TC 020

OTHERS

MTBF
2672.7K hrs min. Telcordia SR-332 (Bellcore) ; 500.3K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
101.6*50.8*29mm (L*W*H)
PACKING
0.19Kg; 72pcs/14.7Kg/0.82CUFT
Test conditions and notes6
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. Derating may be needed under low input voltages. Please check the derating curve for more details.
  5. 5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
  6. 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

Technical drawings

EPP-200-48 Block Diagram
Block Diagram
EPP-200-48 Derating Curve
Derating Curve
EPP-200-48 Mechanical Specification
Mechanical Specification
EPP-200-48 3max.
3max.

Typical applications

  • Industrial automation machinery
  • Industrial control system
  • Mechanical and electrical equipment
  • Electronic instruments, equipments or apparatus

Downloads

FAQ

Can I use the EPP-200-48 for a 48V industrial control panel or automation subsystem?

Yes, this model is a constant-voltage 48V supply rated for 144W and 3A with convection cooling, or 201.6W and 4.2A with a 10CFM fan, which fits 48Vdc control or automation loads within that range. Its wide 80-264VAC input also supports deployment in facilities with varied AC mains.

Is the EPP-200-48 suitable for powering a 48V embedded computer or industrial networking device?

It can be, provided the equipment requires a regulated 48V constant-voltage input and draws no more than 3A/144W by convection, or 4.2A/201.6W with a 10CFM fan. The compact 101.6 x 50.8 x 29.0 mm size can also matter where board-level space is limited.

Can this power supply run a 48V telecom or access-control load?

It is appropriate for 48Vdc loads that need up to 144W and 3A with convection cooling, or up to 201.6W and 4.2A with a 10CFM fan. Buyers should match the device's required DC voltage to the unit's fixed 48V constant-voltage output.

Is the EPP-200-48 rated for outdoor or harsh-environment use?

The provided specs show an operating temperature range of -30 degrees C to +70 degrees C, with output derating at higher temperatures per the derating curve. However, no IP rating is listed, so the provided data does not establish suitability for exposed outdoor, washdown, or wet locations.

How does the EPP-200-48 compare with other EPP series options?

This spec sheet covers only the EPP-200 series, so other EPP families are not listed here. Within EPP-200, the 48V model delivers 3A/144W by convection or 4.2A/201.6W with a 10CFM fan, while the 12V, 15V, 24V and 27V versions are rated 140.4W to 143.1W by convection and 200.4W to 202.5W with a fan.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8655366488384, "variants" :[{ "context":"default", "variant_id": 46624506970432, "sku":"EPP-200-48", "inventory_qty" : 9, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$52.19\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well EPP-200-48 Power Supply 144W 48V 3A
Mean Well

Mean Well EPP-200-48 Power Supply 144W 48V 3A

$52.19 USD

EPP-200-48 is the 48V output model of this series: typical efficiency 94%.

EPP-200 is a 200W highly reliable green PCB type power supply with a high power density (21.9W/in³) on the 4" by 2" footprint. It accepts 80~264VAC input and offers various output voltages between 12V and 48V. The working efficiency is up to 94% and the extremely low no load power consumption is down below 0.5W. EPP-200 is able to be used for both ClassⅠ(with FG) and Class Ⅱ(no FG) system design. EPP-200 is equipped with complete protection functions; it is complied with the international safety regulations such as TUV BS EN/EN62368-1, UL62368-1 and IEC62368-1. EPP-200 series serves as a high price-to-performance power supply solution for various industrial applications.

Features

  • 4"×2" miniature size
  • Universal AC input / Full range
  • Built-in active PFC function
  • EMI Conduction for Class B Radiation for Class B with FG(ClassⅠ) and Class A without FG(ClassⅡ)
  • No load power consumption<0.5W
  • High efficiency up to 94%
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Cooling by free air convection for 140W and 200W with 10CFM forced air
  • Built-in 12V/0.5A FAN supply
  • LED indicator for power on
  • Operating altitude up to 5000 meters
  • 3 years warranty

Typical applications

  • Industrial automation machinery
  • Industrial control system
  • Mechanical and electrical equipment
  • Electronic instruments, equipments or apparatus
View product