Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
DLW05A-15 is the ±15V output model of this series: rated power 5W, typical efficiency 81%.
Features
- 2:1 wide input range
- 4:1 wide input range(option)
- 1500VDC I/O isolation
- 3000VDC I/O isolation(option)
- Built-in EMI filter
- Protections: Short circuit / Overload
- Cooling by free air convection
- Six-sided shield metal case
- 100% burn-in test
- Low cost / High reliability
- Approvals: FCC / EAC / CE / UKCA
- 2 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- ±15V
- CURRENT RANGE
- ±16.7 ~ ±167mA
- RATED POWER
- 5W
- RIPPLE & NOISE (max.)Note.2
- 60mVp-p
- LINE REGULATIONNote.3
- ±0.2%
- LOAD REGULATIONNote.4
- ±0.5%
- VOLTAGE ACCURACY
- ±2.0%
- SWITCHING FREQUENCY
- 50KHz min.
INPUT
- VOLTAGE RANGE
- 9 ~ 18VDC
- EFFICIENCY (Typ.)
- 81%
- DC CURRENT Full load
- 556mA
- DC CURRENT No load
- 33mA
- FILTER
- Pi network
- PROTECTION
- Fuse recommended
PROTECTION (Note. 5)
- OVERLOAD
- 160 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
- SHORT CIRCUIT
- All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT
- WORKING TEMP.
- -25 ~ +71℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -25 ~ +105℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- EAC TP TC 020/2011 approved
- WITHSTAND VOLTAGE
- I/P-O/P:1.5KVDC
- ISOLATION RESISTANCE
- I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55032 Class B, FCC part 15 Class B , EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020
OTHERS
- MTBF
- 800khrs min. MIL-HDBK-217F(25℃)
- DIMENSION
- 50.8*25.4*11.27mm or 2.0"*1.0"*0.44" inch (L*W*H)
- PACKING
- 31.2g ; 10pcs/per tube, 400pcs/40 tube/per carton
Test conditions and notes5
- 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 3.Line regulation is measured from low line to high line at rated load.
- 4.Load regulation is measured from 10% to 100% rated load.
- 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
Technical drawings
Downloads
FAQ
Can I use the DLW05A-15 for low-power analog or instrumentation circuits that need 15V?
Yes, if the circuit requires a regulated ±15V output and the available source to the converter is within 9-18VDC. Its 5W rating makes it suitable for low-power analog, measurement, or interface electronics rather than larger 15V loads.
Is this a good option for 15V embedded or industrial test electronics inside equipment?
It can be, provided the electronics need a regulated ±15V output and the total demand stays within 5W. The compact 50.8 × 25.4 × 11.27 mm package also helps in test fixtures or dense control assemblies.
Can the DLW05A-15 power small 15V control or sensing modules in automation hardware?
Yes, for small control or sensing modules that need a fixed ±15V rail from a 9-18VDC source. This model is better matched to auxiliary electronics than to high-power 15V devices because its output is limited to 5W.
Is the DLW05A-15 suitable for exposed outdoor environments?
The temperature specification is -25°C to +71°C (with load derating per the derating curve), but the listed data does not include any IP rating. That means it should be treated as a converter for protected indoor equipment or a housing that supplies the needed environmental protection.
How do I choose between DLW05A-05, DLW05A-12, and DLW05A-15?
All three share 5W output power, 9-18VDC input, regulated dual output, 50.8 × 25.4 × 11.27 mm dimensions, 31.2 g weight, and a -25°C to +71°C operating range. The selection point is output rating: ±5V and up to ±500mA on DLW05A-05, ±12V and up to ±208mA on DLW05A-12, or ±15V and up to ±167mA on DLW05A-15.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.






