Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well DCWN06B-15 DC-DC Converter - 6W 18~36V DC in 15V out 400mA

$10.84 USD
Shipping calculated at checkout.

|

Your order will be processed within 24 hours

Overview

DCWN06B-15 is the ±15V output model of this series: rated power 6W, typical efficiency 85%.

SCWN06 and DCWN06 series are 6W isolated and regulated module type DC-DC converter with DIP24 package. It features international standard pins, a high efficiency up to 87%, wide working temperature range -40~+ 90℃, 3 KVDC I/P-O/P isolation voltage, Compliance to BS EN/EN55032 radiated Class A without additional components, continuous-mode short circuit protection, etc. The additional components, models account for different input voltage 9~18V, 18~36V and 36~72V 2:1 wide input range, and various output voltage, 3 . 3V /5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on.

Features

  • DIP24 package with industry standard pinout
  • 2:1 wide input range
  • Operating temperature range -40 ~ +90℃
  • No minimum load required
  • Comply to BS EN/EN55032 radiated Class A without additional components
  • High efficiency up to 87%
  • Protections: Short circuit (Continuous) / Overload / Input under voltage
  • 3KVDC I/O isolation
  • 3 years warranty

Specifications

DCWN06B-15Specifications from the official datasheet (2024-04-30 edition)

INPUT

INPUT VOLTAGE (RANGE)
Normal 24V (18 ~ 36V)
INPUT CURRENT NO LOAD
10mA
INPUT CURRENT FULL LOAD
291mA
VOLTAGE RANGE
18~36Vdc ,
SURGE VOLTAGE (100ms max.)
12Vin models : 25Vdc ; 24Vin models : 50Vdc ; 48Vin models : 100Vdc
FILTER
Pi type
PROTECTION (Typ.)
Fuse recommended. 12Vin models: 1.6A Fast-Acting Type, 24Vin models: 1A Fast-Acting Type, 48Vin models: 0.5A Fast-Acting Type
INTERNAL POWER DISSIPATION
500mW

OUTPUT

OUTPUT VOLTAGE
±15V
OUTPUT CURRENT
±0 ~ 200mA
EFFICIENCY (TYP.)
85%
CAPACITOR LOAD (MAX.)* For each output
*2200μF
VOLTAGE ACCURACY
±1.5%
RATED POWER
6W
RIPPLE & NOISENote.2
50mVp-p
LINE REGULATIONNote.3
±0.5%
LOAD REGULATIONNote.4
Single output models:±0.5%, Dual output models:±1%
SWITCHING FREQUENCY (Min.)
100KHz

PROTECTION

SHORT CIRCUIT
Protection type : Continuous, automatic recovery
OVERLOAD
120 ~ 250% rated output power Protection type : Recovers automatically after fault condition is removed
UNDER VOLTAGE LOCKOUT Start-up voltage
12Vin: 8.8Vdc, 24Vin: 17Vdc, 48Vin: 34Vdc
UNDER VOLTAGE LOCKOUT Shutdown voltage
12Vin: 8Vdc, 24Vin: 16Vdc, 48Vin: 31Vdc

ENVIRONMENT

COOLING
Free-air convection
WORKING TEMP.
-40 ~ +90℃ (Refer to "Derating Curve")
CASE TEMPERATURE
+100℃ max.
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +100℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT
0.03% / ℃ (0 ~ 90℃)
SOLDERING TEMPERATURE
1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.5)

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVDC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.)
250pF
EMC EMISSION
ParameterStandardTest Level
ConductedBS EN/EN55032(CISPR32)N/A
RadiatedBS EN/EN55032(CISPR32)Class A
EMC IMMUNITY
ParameterStandardTest Level
ESDBS EN/EN61000-4-2Level 2, ±8KV air, ±4KV contact
Radiated SusceptibilityBS EN/EN61000-4-3Level 2, 3V/m
EFT/BurstsBS EN/EN61000-4-4Level 1, 0.5KV
SurgeBS EN/EN61000-4-5Level 1, 0.5KV Line-Line
ConductedBS EN/EN61000-4-6Level 2, 3V(e.m.f.)
Magnetic FieldBS EN/EN61000-4-8Level 2, 3A/m

OTHERS

MTBF (Typ.)
1800Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H)
31.8*20.3*10.2mm (1.25*0.8*0.4 inch)
CASE MATERIAL
Non-Conductive black plastic (UL 94V-0 rated)
PACKING
12.4g ; 10pcs/per tube, 600pcs/60 tube/per carton
Test conditions and notes5
  1. 1.All parameters are specified at normal input(A:12Vdc, B:24Vdc, C:48Vdc), rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 10% to 100% rated load for SCWN06, 25% to 100% rated load for DCWN06.
  5. 5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

DCWN06B-15 Plug Assignment
Plug Assignment
DCWN06B-15 Packing
Packing

Typical applications

  • Telecom/ datacom system
  • Wireless network
  • Industrial control facility
  • Instrument
  • Analyzer
  • Detector
  • Data switch

Downloads

FAQ

What is the DCWN06B-15 typically used for?

The Mean Well DCWN06B-15 is typically used as a compact isolated DC-DC converter for generating a regulated ±15V output from an 18-36V DC input. With 6W rated power and ±200mA output current, it is intended for low-power dual-rail auxiliary and control applications in 24V-class DC systems.

Is the DCWN06B-15 a good fit for low-power 15V rails from a 24V-class DC source?

Yes. The DCWN06B-15 converts an 18-36V DC input into a ±15V output at up to ±200mA, making it suitable for low-power isolated dual-rail circuits that fit within its 6W rating.

What features make the DCWN06B-15 useful in compact isolated systems?

The DCWN06B-15 offers a DIP24 package, 3KVDC isolation, no minimum load requirement, and typical efficiency up to 85%. Those characteristics make it useful in compact low-power industrial and embedded designs.

Can the DCWN06B-15 be used in demanding temperature environments?

Yes. Its published operating temperature range is -40°C to +90°C, which supports use in a broad range of industrial conditions when the converter is used within specification.

How does the DCWN06B-15 compare with nearby DCWN models?

The DCWN06B-15 is the ±15V output member of the 6W 06B group, while the DCWN06B-05 and DCWN06B-12 provide ±5V and ±12V outputs from the same 18-36V input class. Compared with 3W DCWN03B models, the main distinction is the higher 6W output capacity.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8658887016768, "variants" :[{ "context":"default", "variant_id": 46633093071168, "sku":"DCWN06B-15", "inventory_qty" : 0, "customer" : true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$10.84\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e\n", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well DCWN06B-15 DC-DC Converter - 6W 18~36V DC in 15V out 400mA
Mean Well

Mean Well DCWN06B-15 DC-DC Converter - 6W 18~36V DC in 15V out 400mA

$10.84 USD

DCWN06B-15 is the ±15V output model of this series: rated power 6W, typical efficiency 85%.

SCWN06 and DCWN06 series are 6W isolated and regulated module type DC-DC converter with DIP24 package. It features international standard pins, a high efficiency up to 87%, wide working temperature range -40~+ 90℃, 3 KVDC I/P-O/P isolation voltage, Compliance to BS EN/EN55032 radiated Class A without additional components, continuous-mode short circuit protection, etc. The additional components, models account for different input voltage 9~18V, 18~36V and 36~72V 2:1 wide input range, and various output voltage, 3 . 3V /5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on.

Features

  • DIP24 package with industry standard pinout
  • 2:1 wide input range
  • Operating temperature range -40 ~ +90℃
  • No minimum load required
  • Comply to BS EN/EN55032 radiated Class A without additional components
  • High efficiency up to 87%
  • Protections: Short circuit (Continuous) / Overload / Input under voltage
  • 3KVDC I/O isolation
  • 3 years warranty

Typical applications

  • Telecom/ datacom system
  • Wireless network
  • Industrial control facility
  • Instrument
  • Analyzer
  • Detector
  • Data switch
View product