Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
RSP-150-13.5 is the 13.5V output model of this series: rated current 11.2A, rated power 151.2W, typical efficiency 87.5%.
RSP-150 is a 150W single output enclosed type AC/DC power supply. This series operates for 85~264VAC input voltage and offers the models with the DC output mostly demanded from the industry. Each model is cooled by free air convection , working for the temperature up to 70℃.
Features
- Universal AC input / Full range
- Built-in active PFC function
- High efficiency up to 90%
- Cooling by free air convection
- Built-in remote ON-OFF control
- Protections: Short circuit / Overload / Over voltage / Over temperature
- LED indicator for power on
- Operating altitude up to 5000 meters (see OVER VOLTAGE CATEGORY)
- 3 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- 13.5V
- RATED CURRENT
- 11.2A
- CURRENT RANGE
- 0 ~ 11.2A
- RATED POWER
- 151.2W
- RIPPLE & NOISE (max.)Note.2
- 100mVp-p
- VOLTAGE ADJ. RANGE
- 12.8 ~ 14.9V
- VOLTAGE TOLERANCENote.3
- ±2.0%
- LINE REGULATION
- ±0.5%
- LOAD REGULATION
- ±0.5%
- SETUP, RISE TIME
- 600ms, 30ms at full load
- HOLD UP TIME (Typ.)
- 16ms at full load
INPUT
- VOLTAGE RANGENote.5
- 85 ~ 264VAC 120 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- POWER FACTOR (Typ.)
- PF>0.93/230VAC PF>0.98/115VAC at full load
- EFFICIENCY (Typ.)
- 87.5%
- AC CURRENT (Typ.)
- 1.6A/115VAC 0.8A/230VAC
- INRUSH CURRENT (Typ.)
- COLD START 45A/230VAC
- LEAKAGE CURRENT
- <2mA / 240VAC
PROTECTION
- OVERLOAD
- 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 14.85 ~ 18.2V Protection type : Shut down o/p voltage, re-power on to recover
- OVER TEMPERATURE
- Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION
- REMOTE CONTROL
- CN1: < 0~0.8VDC POWER ON , 4~10VDC POWER OFF
ENVIRONMENT
- WORKING TEMP.
- -30 ~ +70℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20 ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +85℃, 10 ~ 95% RH non-condensing
- TEMP. COEFFICIENT
- ±0.05%/℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
- OVER VOLTAGE CATEGORY
- Ⅲ; According to EN61558, EN50178,EN60664-1, EN62477-1 ; altitude up to 2000 meters Ⅱ; According to UL/IEC/EN 62368; altitude up to 5000 meters
SAFETY & EMC (Note 4)
- SAFETY STANDARDS
- UL62368-1, TUV BS EN/EN62368-1, BS EN/EN61558-1, BS EN/EN61558-2-16, EAC TP TC 004, CCC GB4943.1, BSMI CNS15598-1, AS/NZS 62368.1, IS13252(Part1)/IEC60950-1(except for 7.5V,13.5V,48V)approved
- WITHSTAND VOLTAGE
- I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
- ISOLATION RESISTANCE
- I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020, GB9254 Class B, GB17625.1,CNS15936 Class B
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level, EAC TP TC 020
OTHERS
- MTBF
- 2253.9K hrs min. Telcordia SR-332 (Bellcore) ; 290.7K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 199*99*30mm (L*W*H)
- PACKING
- 0.6Kg; 24pcs/15.4Kg/0.89CUFT
Test conditions and notes7
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
- 3. Tolerance : includes set up tolerance, line regulation and load regulation.
- 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
- 5. Derating may be needed under low input voltages. Please check the derating curve for more details.
- 6. Strongly recommended that external output capacitance should not exceed 5000uF. (Only for: RSP-150-3.3/-5/-7.5/-12)
- 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
Technical drawings
Typical applications
- Factory control or automation apparatus
- Test and measurement instrument
- Laser related machine
- Burn-in facility
- RF application
Downloads
Certificates4
Test reports1
FAQ
When would a designer choose the RSP-150-13.5 over the RSP-150-12 or RSP-150-15?
The RSP-150-13.5 provides 13.5V at 11.2A (151.2W), positioned between the 12V (12.5A) and 15V (10A) options. A 13.5V output is appropriate for battery float charging of 12V lead-acid batteries, certain motor controllers with mid-range voltage requirements, and telecom auxiliary circuits that specify a 13.5V nominal supply.
Can the RSP-150-13.5 operate in an outdoor enclosure in a cold climate?
The RSP-150-13.5 is rated from -30°C to +70°C ambient (with derating per the derating curve) and 20–90% RH non-condensing. No IP ingress rating is specified, so it must not be exposed outdoors; any enclosure must keep it dry and non-condensing. The -30°C lower limit supports cold-climate operation when the enclosure maintains this minimum.
What certifications does the RSP-150-13.5 hold?
The RSP-150-13.5 is approved to UL62368-1, TÜV BS EN/EN62368-1, BS EN/EN61558-1 and BS EN/EN61558-2-16, EAC TP TC 004, CCC GB4943.1, BSMI CNS15598-1 and AS/NZS 62368.1. This covers North America, Europe, the Eurasian Economic Union, China, Taiwan and Australia/New Zealand.
What is the form factor of the RSP-150-13.5 and is it rack-mountable?
The RSP-150-13.5 is an enclosed unit measuring 199.0 × 99.0 × 30.0 mm and weighing 0.6 kg. It mounts with M4 screws (2 holes on the base, 4 on the sides); the datasheet does not specify rack mounting.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other RSP-150 Models
1 other model| Model | Power | Voltage | Current | |
|---|---|---|---|---|
| Mean Well RSP-150-27 Power Supply 150W 27V 5.6A | 151.2W | 27V | 5.6A | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.







