Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well RST-15K-380 High Power AC/DC Power Supply 15030W, 3 Phase Input, 380V Output 39.55A

Name: Mean Well RST-15K-380 High Power AC/DC Power Supply 15030W, 3 Phase Input, 380V Output 39.55A
Brand: Mean Well
SKU: RST-15K-380
Price: 6106.96 USD
Availability: InStock

up to 94% efficiencywide voltage adjustment range 1~120%active current sharing up to 2 units(28.5KW)

SKU RST-15K-380

$6,106.96 USD

Shipping calculated at checkout.

Available to order

Overview

RST-15K-380 is the model of this series: rated power 15030W, typical efficiency 94%.

RST-15K-HV is a 15KW 3ψ input enclosed type AC/DC power supply. This series operates for the wide range three phase AC input and offers the models with the high voltage DC output(115V/230V/380V) that mostly demanded from the industry. This series provides models with forced air cooling, that can be working at ambient temperature up to 70℃. Moreover, RST-15K-HV provides vast design flexibility by equipping various built-in functions such as the output programming, active current sharing, remote ON-OFF control, alarm signals.....etc.

Features

3ψ 3-wire / △196~305VAC or 3ψ 4-wire / Y 340~530VAC
High efficiency up to 94%
Forced air cooling
Output voltage and constant current level programmable
Wide voltage adjustment range 1~120%
Active current sharing up to 2 units(28.5KW)
Built-in remote ON-OFF control / Alarm signal
Protections: Short circuit / Overload / Over voltage / Over temperature / Fan fail
5 years warranty

Specifications

RST-15K-380Specifications from the official datasheet (2025-09-15 edition)

OUTPUT

DC VOLTAGE (factory default): 380V
CURRENT (factory default): 39.55A
CURRENT RANGE: 0 ~ 45A
RATED POWER: 15030W
FULL POWER VOLTAGE RANGE: 334 ~ 400V
RIPPLE & NOISE (max.)^Note.2: 4Vp-p
VOLTAGE ADJ. RANGE: 260 ~ 400V
VOLTAGE ADJ. RANGE: Can be adjusted via built-in potentiometer
VOLTAGE TOLERANCE^Note.3: ±1.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±0.5%
SETUP, RISE TIME: 3000ms, 200ms at full load
HOLD UP TIME (Typ.): 16ms 230VAC/400VAC at 75% load 10ms / 230VAC/400VAC at full load

INPUT

VOLTAGE RANGE: 3ψ 3W/△196~305VAC or 3ψ 4W/Y 340~530VAC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): ≧0.98/230VAC(400VAC)/≧0.97/277VAC(480VAC) at full load
EFFICIENCY (Typ.)^Note.7: 94%
AC CURRENT (Typ.): 45A/230VAC(3ψ 3-wire / △) 26A/400VAC(3ψ 4-wire / Y)
INRUSH CURRENT (Typ.): 150A/230VAC(3ψ 3-wire / △) 100A/400VAC(3ψ 4-wire / Y)
LEAKAGE CURRENT: <3.5mA/Y 530VAC <21mA /△305VAC

PROTECTION

OVERLOAD: 100 ~ 107% of rated current Protection type : Constant current limiting. After O/P voltage falls, unit will shut down after 5 sec. re-power on to recover
OVER VOLTAGE: 420 ~ 480V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

CURRENT SHARING: Up to 2 units. Please refer to the Function Manual
OUTPUT VOLTAGE PROGRAMMABLE: Adjustment of output voltage is allowable between 1 ~ 120% of nominal output voltage. Please refer to the PV curve Function Manual
CONSTANT CURRENT LEVEL PROGRAMMABLE: Adjustment of constant current level is allowable between 20 ~ 100% of rated current. Please refer to the Function Manual
REMOTE ON-OFF CONTROL: Please refer to the Function Manual
ALARM SIGNAL OUTPUT: AC fail, DC OK, fan fail, OTP. Please refer to the Function Manual.

ENVIRONMENT

WORKING TEMP.: -30 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 45℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: UL62368-1, CAN/CSA C22.2 No. 62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE^Note.4: I/P-O/P:4.3KVDC I/P-FG:2.8KVDC O/P-FG:2.8KVDC
ISOLATION RESISTANCE^Note.4: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032 (CISPR32) / BS EN/EN55011 (CISPR11) Class A
Radiated BS EN/EN55032 (CISPR32) / BS EN/EN55011 (CISPR11) Class A
Harmonic Current BS EN/EN61000-3-12
Voltage Flicker BS EN/EN61000-3-11
EMC IMMUNITY: BS EN/EN55024 , BS EN/EN61204-3, BS EN/EN61000-6-2

Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact
Radiated BS EN/EN61000-4-3 Level 3
EFT / Burst BS EN/EN61000-4-4 Level 3
Surge BS EN/EN61000-4-5 Level 4, 4KV/Line-Earth; Level 3, 2KV/Line-Line
Conducted BS EN/EN61000-4-6 Level 3
Magnetic Field BS EN/EN61000-4-8 Level 4
Voltage Dips and Interruptions BS EN/EN61000-4-34 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

Parameter	Standard	Test Level
Conducted	BS EN/EN55032 (CISPR32) / BS EN/EN55011 (CISPR11)	Class A
Radiated	BS EN/EN55032 (CISPR32) / BS EN/EN55011 (CISPR11)	Class A
Harmonic Current	BS EN/EN61000-3-12
Voltage Flicker	BS EN/EN61000-3-11

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, 8KV air; Level 2, 4KV contact
Radiated	BS EN/EN61000-4-3	Level 3
EFT / Burst	BS EN/EN61000-4-4	Level 3
Surge	BS EN/EN61000-4-5	Level 4, 4KV/Line-Earth; Level 3, 2KV/Line-Line
Conducted	BS EN/EN61000-4-6	Level 3
Magnetic Field	BS EN/EN61000-4-8	Level 4
Voltage Dips and Interruptions	BS EN/EN61000-4-34	>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

OTHERS

MTBF: 121.9K hrs min. Telcordia SR-332 (Bellcore) ; 16.2K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 540*424*83.5mm (L*W*H)
PACKING: 25Kg; 1pcs/25Kg/2.82CUFT

Test conditions and notes10

1. All parameters NOT specially mentioned are measured at △230VAC(Y 400VAC) input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. During withstand voltage and isolation resistance testing, the screw "A" shall be temporarily removed, and shall be installed back after the testing.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. If use PV signal to adjust Vo, under creatin operation conditions, ripple noise of Vo might go over rating defined in this specification.
7. The efficiency is measured at △: 230VAC/Y: 400VAC input. The efficiency level is measured at output voltage 115V(115V model)/230V(230V model)/380V(380V model).
8. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 600mm*900mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies." (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
9. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
10. An unstable O/P voltage is expected in the first 300ms after power on. A minimum load of 5% is suggested if fast load change is required at power on phase.

Technical drawings

RST-15K-380 Block Diagram — Block Diagram

RST-15K-380 DERATING CURVE — DERATING CURVE

RST-15K-380 STATIC CHARACTERISTICS — STATIC CHARACTERISTICS

RST-15K-380 Function Manual — Function Manual

RST-15K-380 OUTPUTCURRENT(%) — OUTPUTCURRENT(%)

RST-15K-380 15KW 3ψ4W Input With High Voltage Output (2) — 15KW 3ψ4W Input With High Voltage Output (2)

RST-15K-380 Mechanical Specification — Mechanical Specification

RST-15K-380 15KW 3ψ4W Input With High Voltage Output — 15KW 3ψ4W Input With High Voltage Output

RST-15K-380 ※ Control Pin No. Assignment (CN25) : HRS DF11-08DP-2DS… — ※ Control Pin No. Assignment (CN25) : HRS DF11-08DP-2DS…

Typical applications

Downloads

Datasheet1

RST-15K-380 datasheetRST-15K-HV-SPEC.PDF · 2025-09-15 edition PDF Download

FAQ

What applications is the Mean Well RST-15K-380 designed for?

The RST-15K-380 is intended for high-power industrial systems that need a regulated 380V DC output from a 3-phase AC source. With a 15030W power rating, it is suited to demanding OEM and commercial applications where high output power and a built-in industrial feature set are important.

What makes the RST-15K-380 suitable for high-power systems?

This model delivers 15030W of output power at 380V and 39.55A, placing it in a very high-power class. It also supports active current sharing for up to 2 units, allowing system designers to scale to as much as 28.5KW when higher capacity is required.

What input power range does the RST-15K-380 support?

The RST-15K-380 is built for 3-phase AC input. It supports 3-phase 3-wire delta input from 196 to 305VAC and 3-phase 4-wire wye input from 340 to 530VAC, making it appropriate for industrial power environments that use 3-phase service.

Can the output of the RST-15K-380 be adjusted?

Yes. This model has programmable output voltage and constant current level control, and it offers a wide voltage adjustment range from 1% to 120%. That makes it more flexible than fixed-output supplies in applications that need controlled output tuning within the product's design range.

How efficient is the Mean Well RST-15K-380?

The RST-15K-380 is rated for efficiency up to 94%. High efficiency helps reduce wasted energy and is especially valuable in high-power equipment where thermal performance and operating cost matter.

What protections are included in the RST-15K-380?

This power supply includes protection for overload, over voltage, and over temperature. It also provides fan fail alarm signals. Those built-in protections help support reliability in demanding industrial operating conditions.

What operating environment is the RST-15K-380 rated for?

The specified operating temperature range is -30°C to 70°C. The unit uses forced air cooling, which is consistent with its high-power design and supports operation across a wide industrial temperature range.

What should buyers know about the size and service life of this model?

The RST-15K-380 weighs 25 kg, which reflects its high-power enclosed industrial construction. Mean Well also backs this model with a 5-year warranty, giving buyers added confidence for long-term commercial use.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current
Mean Well RST-15K-230 High Power AC/DC Power Supply 14904W, 3 Phase Input, 230V Output 64.8A	14904W	230V	64.8A	View
Mean Well RST-15K-115 High Power AC/DC Power Supply 14950W, 3 Phase Input, 115V Output 130A	14950W	115V	130A	View

Please log in to write a review.

{ "id":9065179021632, "variants" :[{ "context":"default", "variant_id": 47877400658240, "sku":"RST-15K-380", "inventory_qty" : 0, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$6,106.96\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }