Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SKE10A-15 DC-DC Converter - 10W - 9~18V in 15V out 666mA

Name: Mean Well SKE10A-15 DC-DC Converter - 10W - 9~18V in 15V out 666mA
Brand: Mean Well
SKU: SKE10A-15
Price: 21.34 USD
Availability: InStock

SKU SKE10A-15

$21.34 USD

Shipping calculated at checkout.

In stock

Overview

SKE10A-15 is the 15V output model of this series: rated power 10W, typical efficiency 80%.

Features

Specifications

SKE10A-15Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC VOLTAGE: 15V
CURRENT RANGE: 66.6 ~ 666mA
RATED POWER: 10W
RIPPLE & NOISE (max.)^Note.2: 60mVp-p
LINE REGULATION^Note.3: ±0.3%
LOAD REGULATION^Note.4: ±0.5%
VOLTAGE ACCURACY: ±2.0%
SWITCHING FREQUENCY: 200KHz min.

INPUT

VOLTAGE RANGE: 9 ~ 18VDC
EFFICIENCY (Typ.): 80%
DC CURRENT Full load: 1100mA
DC CURRENT No load: 28mA
FILTER: Pi network
PROTECTION: Fuse recommended

PROTECTION (Note. 5)

OVER CURRENT: 160% ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT: All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.: -25 ~ +71℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -25 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03% / ℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:1.5KVDC
ISOLATION RESISTANCE: I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020

OTHERS

MTBF: 500Khrs min. MIL-HDBK-217F(25℃)
DIMENSION: 50.8*25.4*11.2mm or 2"*1"*0.44" inch (L*W*H)
PACKING: 31.2g ; 10pcs/per tube, 400pcs/40 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.

Technical drawings

SKE10A-15 Mechanical Specification — Mechanical Specification

Downloads

Certificates1

FCC Certificate (SKE10)(EN) PDF Download

Test reports1

Test Report(SKE10A-15)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the SKE10A-15 for a 15V industrial control board or signal-processing module?

It can be used where the equipment needs constant-voltage 15V output and total demand stays within 10W. The input source also needs to be within the specified 9-18VDC range.

Is the SKE10A-15 a fit for embedded systems that run on 15V power rails?

This model is built for 15V constant-voltage output, so it can suit embedded hardware designed around a 15V rail. It is best matched to compact electronics because the converter itself measures 50.8 × 25.4 × 11.2 mm and is rated at 10W.

Can this model support a small 15V automation subsystem inside a machine enclosure?

It can fit a small 15V automation subsystem if the available source is 9-18VDC and the subsystem stays within the converter's 10W output rating. The specified operating range of -25°C to +71°C also gives a defined temperature window for enclosed equipment.

Is the SKE10A-15 meant for indoor-only use or can it handle wider temperature conditions?

The unit is specified for operation from -25°C to +71°C, so it has a defined temperature range broader than basic room conditions. However, no IP rating is listed, so the specs do not confirm outdoor or water-exposed use.

What is the difference between the SKE10A-15 and the other SKE10A versions?

The listed SKE10A family shares the same 10W power class and 9-18VDC input range. The difference is output rating: SKE10A-05 is 5V and 2A, SKE10A-12 is 12V and 840mA, SKE10A-15 is 15V and 666mA, and SKE10A-24 is 24V and 420mA.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":8659359498560, "variants" :[{ "context":"default", "variant_id": 46634951016768, "sku":"SKE10A-15", "inventory_qty" : 9, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$21.34\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well SKE10A-15 DC-DC Converter - 10W - 9~18V in 15V out 666mA

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION (Note. 5)

ENVIRONMENT

SAFETY & EMC

OTHERS

Technical drawings

Downloads

Certificates1

Test reports1

Catalogues2

FAQ

Payment & Security

Write a review

Your cart

Mean Well SKE10A-15 DC-DC Converter - 10W - 9~18V in 15V out 666mA

Features

Company Information

Services and Support

Choose options