Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SKE10A-12 DC-DC Converter - 10W - 9~18V in 12V out 840mA

Name: Mean Well SKE10A-12 DC-DC Converter - 10W - 9~18V in 12V out 840mA
Brand: Mean Well
SKU: SKE10A-12
Price: 21.34 USD
Availability: InStock

SKU SKE10A-12

$21.34 USD

Shipping calculated at checkout.

Available to order

Overview

SKE10A-12 is the 12V output model of this series: rated power 10W, typical efficiency 79%.

Features

Specifications

SKE10A-12Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC VOLTAGE: 12V
CURRENT RANGE: 84 ~ 840mA
RATED POWER: 10W
RIPPLE & NOISE (max.)^Note.2: 60mVp-p
LINE REGULATION^Note.3: ±0.3%
LOAD REGULATION^Note.4: ±0.5%
VOLTAGE ACCURACY: ±2.0%
SWITCHING FREQUENCY: 200KHz min.

INPUT

VOLTAGE RANGE: 9 ~ 18VDC
EFFICIENCY (Typ.): 79%
DC CURRENT Full load: 1100mA
DC CURRENT No load: 28mA
FILTER: Pi network
PROTECTION: Fuse recommended

PROTECTION (Note. 5)

OVER CURRENT: 160% ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT: All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.: -25 ~ +71℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -25 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03% / ℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:1.5KVDC
ISOLATION RESISTANCE: I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020

OTHERS

MTBF: 500Khrs min. MIL-HDBK-217F(25℃)
DIMENSION: 50.8*25.4*11.2mm or 2"*1"*0.44" inch (L*W*H)
PACKING: 31.2g ; 10pcs/per tube, 400pcs/40 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.

Technical drawings

SKE10A-12 Mechanical Specification — Mechanical Specification

Downloads

Certificates1

FCC Certificate (SKE10)(EN) PDF Download

Test reports1

Test Report(SKE10A-12)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the SKE10A-12 for a 12V sensor or small control module in industrial equipment?

It can fit 12V industrial sensors or small control modules when the load stays within the unit's 10W constant-voltage output. This model accepts 9-18VDC input and provides 12V output, so the source and load both need to match those values.

Is the SKE10A-12 suitable for embedded electronics that need regulated 12V from a low-voltage DC source?

Yes, if the embedded device requires a constant 12V supply and the available input is within 9-18VDC. Its compact 50.8 × 25.4 × 11.2 mm size can also help where board or enclosure space is limited.

Can this converter be used inside an automation panel for 12V relays or interface boards?

It is intended for constant-voltage 12V output up to 10W, so it can work for 12V relays or interface boards within that power limit. Buyers should confirm the panel's source is 9-18VDC and that the total demand does not exceed the converter's rating.

Is the SKE10A-12 okay for outdoor or harsh-environment use?

The listed operating temperature is -25°C to +71°C, which defines its temperature range. No IP rating is provided in the specs, so outdoor exposure or washdown use is not confirmed by the product data.

How does the SKE10A-12 compare with other SKE10A models?

Within the SKE10A series, all listed models are 10W units with 9-18VDC input. The output options shown are SKE10A-05 at 5V and 2A, SKE10A-12 at 12V and 840mA, SKE10A-15 at 15V and 666mA, and SKE10A-24 at 24V and 420mA.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":8659359072576, "variants" :[{ "context":"default", "variant_id": 46634948788544, "sku":"SKE10A-12", "inventory_qty" : 0, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$21.34\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well SKE10A-12 DC-DC Converter - 10W - 9~18V in 12V out 840mA

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION (Note. 5)

ENVIRONMENT

SAFETY & EMC

OTHERS

Technical drawings

Downloads

Certificates1

Test reports1

Catalogues2

FAQ

Payment & Security

Write a review

Your cart

Mean Well SKE10A-12 DC-DC Converter - 10W - 9~18V in 12V out 840mA

Features

Company Information

Services and Support

Choose options