Over 15 years experience of providing support of MEAN WELL Power Supplies
Mean Well NPB-360-24AD1 Battery Charger 360W 24V Anderson Connector 12A
Overview
NPB-360-24AD1 is the model of this series: typical efficiency 91%.
NPB-360 series is a 360W charger for compatible with lead-acid (Flooded, Gel, AGM) and li-ion(Lithium iron, lithium manganese) batteries. This product is a classⅠ power unit (with FG), equipped with a standard IEC320-C14 AC inlet and two or three-stage charging control. The entire series supplies different models with output voltages ranging between 10.5VDC and 60.8VDC that can satisfy the demands for various types of batteries devices.
Features
- 90~264Vac universal AC input, built-in PFC
- Charger for compatible with lead-acid and li-ion batteries
- Wide adjustable output range by VR:
- ►Charging voltage adjustable(10.5~15.2V、21~30.4V、42~60.8V)
- ►Charging current adjustable(50~100% rated current)
- 2 or 3 stage selectable by DIP S.W
- No load power consumption< 0.15W(AC S.W off)
- Fan ON-OFF control (Depends on internal temperature)
- -30℃~+70℃ wide operating temperature
- Protections: Short circuit / Over voltage /Over temperature / Battery reverse polarity protection
- Comply with UL/EN62368-1 and EN60335-1/2-29 dual certification
- Front panel LED indicator for charging status
- 3 years warranty
Specifications
OUTPUT
- BOOST CHARGE VOLTAGE(Vboost)(default)
- 28.8V
- FLOAT CHARGE VOLTAGE(Vfloat)(default)
- 27.6V
- VOLTAGE ADJUSTABLE RANGE
- 21 ~ 30.4V
- OUTPUT CURRENT(Typ.)Note.5
- 12A
- CURRENT ADJUSTABLE RANGE
- 50% ~ 100%
- MAX. POWERNote.3
- 364.8W
- RECOMMENDED BATTERY CAPACITY (AMP HOURS)Note.4
- 40 ~ 125AH
- LEAKAGE CURRENT FROM BATTERY (Typ.)
- <1mA
INPUT
- VOLTAGE RANGENote.5
- 90 ~ 264VAC 127 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- POWER FACTOR (Typ.)
- PF>0.98/115VAC, PF>0.95/230VAC at full load
- EFFICIENCY (Typ.) XLR
- 91%
- EFFICIENCY (Typ.) AD1
- 91%
- EFFICIENCY (Typ.) TB
- 92%
- AC CURRENT (Typ.)
- 4.5A/115VAC 2.2A/230VAC
- INRUSH CURRENT (Typ.)
- COLD START 50A at 230VAC
- LEAKAGE CURRENT
- <0.75mA/240VAC
PROTECTION
- SHORT CIRCUITNote.6
- Protection type : Constant current limiting, charger will shutdown after 5 sec, re-power on to recover
- OVER VOLTAGE
- 32 ~ 40V Protection type : Shut down and latch off o/p voltage, re-power on to recover
- REVERSE POLARITY
- By internal fuse open
- OVER TEMPERATURE
- Hiccup mode, recovers automatically after temperature goes down
FUNCTION
- CHARGING CURVE
- 2 or 3 stage adjustable by DIP S.W
- FAN CONTROL (Typ.)
- Internal RTH3≧50℃ Fan ON, ≦45℃ Fan OFF
ENVIRONMENT
- WORKING TEMP.
- -30 ~ +70℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20 ~ 95% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +85℃, 10 ~ 95% RH non-condensing
- TEMP. COEFFICIENT
- ±0.05%/℃ (0 ~ 45℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- CB IEC62368-1,IEC60335-1/2-29, Dekra BS EN/EN62368-1,BS EN/EN60335-1/2-29, UL62368-1, AS/NZS60335-1/2-29, J62368-1 ,KC62368-1,EAC TP TC 004, BSMI CNS15598-1 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
- ISOLATION RESISTANCE
- I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
-
Parameter Standard Test Level Conducted BS EN/EN55032 (CISPR32),BS EN/EN55014-1,CNS15936 Class B Radiated BS EN/EN55032 (CISPR32),BS EN/EN55014-1,CNS15936 Class B Harmonic Current BS EN/EN61000-3-2 Class A Voltage Flicker BS EN/EN61000-3-3 - EMC IMMUNITY
-
BS EN/EN55014-2,BS EN/EN55024,BS EN/EN55035, J55032(H29), KSC 9832, KSC 9835
Parameter Standard Test Level ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact Radiated BS EN/EN61000-4-3 Level 2, 3V/m EFT / Burst BS EN/EN61000-4-4 Level 2, 1KV Surge BS EN/EN61000-4-5 Level 2, 1KV/Line-Line,Level 3, 2KV/Line-Earth Conducted BS EN/EN61000-4-6 Level 2, 3Vrms Magnetic Field BS EN/EN61000-4-8 Level 1, 1A/m Voltage Dips and Interruptions BS EN/EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS
- MTBF
- 1324.7K hrs min. Telcordia TR/SR-332 (Bellcore) ; 173.9K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 182.7*96*49mm (L*W*H)
- PACKING
- 1.3Kg; 10pcs/ 14Kg / 1.13CUFT
Test conditions and notes7
- 1. Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
- 2. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- 3. Refer to derating curve.
- 4. This is MEAN WELL's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation.
- 5. Derating may be needed under low input voltages. Please check the derating curve for more details.
- 6. This protection mechanism is specified for the case the short circuit occurs after the charger is turned on.
- 7. The charger is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
Technical drawings
Typical applications
- Radio system backup solution
- Electric scooter charger
- Camping car、Buses、Heavy duty truck、Specialty vehicles
- Surveillance system
- Portable power tools
Downloads
Certificates8
Test reports1
FAQ
What are the main output specs of the Mean Well NPB-360-24AD1 battery charger?
The NPB-360-24AD1 is a 360W AC-DC battery charger with a 28.8V DC output and 12A rated current. It is built as a single-output charger and includes power factor correction. This model is intended for 24V battery charging applications that match its output rating.
Is the NPB-360-24AD1 suitable for portable or field-use charging setups?
This model is commonly suited to portable charging use where a 24V battery charger with a compact industrial form factor is needed. Its 1.3 kg weight makes it more manageable than heavier bench-style charging equipment. Buyers looking for a transportable 24V charger often consider this type of unit for service, maintenance, or mobile equipment support.
What charging method does the NPB-360-24AD1 use?
The NPB-360-24AD1 supports 2-stage or 3-stage charging, depending on the application requirements. That makes it more application-specific than a simple fixed-output power supply. For buyers comparing charger types, this is an actual battery charger rather than just a generic 24V DC source.
What connector type is used on the NPB-360-24AD1?
This specific model version uses an Anderson connector on the output side. That is a useful distinction when comparing it with other chargers in the same power class, because connector style can affect product compatibility with existing equipment. If your standard is an Anderson-style interface, this model is designed around that format.
Can the NPB-360-24AD1 operate in demanding temperature conditions?
The rated operating temperature range is -30°C to +70°C, with output derating at higher ambient temperatures according to the datasheet derating curve. That makes it relevant for buyers evaluating chargers for cold environments, warmer plant conditions, or mixed indoor and light industrial settings. Environmental suitability should still be reviewed against the full system conditions and enclosure design.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other NPB-360 Models
8 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.











