Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well NPB-1700-24 Battery Charger 1680W 24V - Suitable for Lead-acid and Li-ion 50A

ultra wide charging range auto sensing functioncharging voltage/current/timeout can be programmed through SBP-001charging curves/stages can be selected through dip switch
SKU NPB-1700-24
$421.53 USD
Shipping calculated at checkout.
In stock
|

Overview

NPB-1700-24 is the model of this series: typical efficiency 93%.

NPB-1700 is a miniaturized, versatile, and ultra-wide voltage intelligent charger. It utilizes a fully digital control design with automatic battery voltage detection technology, with five key features including intelligent, versatile, user friendly, safe, and compact. The series have four models with output voltage ranges of 10.5~21V, 21~42V and 42~80V respectively. The charging voltage range of each model is wide enough to cover a variety of different battery voltages and battery chemistries, and there is a built-in intelligent voltage detection charging mode (Note this mode is set to OFF by factory default and is suitable for lithium batteries with BMS only). The NPB-1700 can pair with MEAN WELL's SBP-001 programmer for digital configuration, such as adjust charging voltage/current, and set charging cycle time to protect battery lifetime. Through the user-friendly DIP S.W. on front panel, user may also directly adjust the 2/3 stage charging, current (50~100%), and select between the 4 types of preset charging curves. In addition, a CANBus communication protocol is built in to meet professional applications, which allows remote controlling and monitoring for the status of the charger. In terms of safety, it has intelligent detection for proper battery voltage and connection as well as protection from reverse polarity. It passes ITE IEC/EN/UL62368-1 and household appliance EN60335-1/-2-29 dual safety and 3-year warranty to guarantee reliable operation. The NPB-1700 is truly an intelligent, safe, and reliable universal charger with outstanding cost performance.

Features

  • Auto ranging with ultra-wide charging voltage (10.5~21V, 21~42V, 42~80V; Please refer to page 8 for setting)
  • Built-in CANBus protocol for control, setting and monitoring
  • Programmable charging curve via SBP-001
  • Manual setting for 2/3 stage and 4 built-in charging curves via DIP S.W
  • Multiple protections: Short circuit / Over voltage / Over temperature/ Battery under voltage /Battery reverse polarity (No damage)
  • Charger OK and Battery Full signal
  • Temperature compensation function to prolong battery life (Lead-acid only)
  • -30℃~+70℃ wide operating temperature
  • Thermal controlled DC fan for noise reduction
  • Remote ON/OFF control
  • Smart programmer available (Order NO.: SBP-001, sold separately)
  • Carry handle accessory available(Order NO.: Carry handle, sold separately)
  • Comply with 62368-1 + 60335-1/-2-29 dual certification
  • Suitable for lead-acid (Pb) and li-ion batteries
  • 3 years warranty

Specifications

NPB-1700-24Specifications from the official datasheet (2025-04-11 edition)

OUTPUT

BOOST CHARGE VOLTAGE(Vboost)(default)
28.8V
FLOAT CHARGE VOLTAGE(Vfloat)(default)
27.6V
CHARGE VOLTAGE RANGENote.3
21 ~ 42V
MAX. OUTPUT CURRENT(CC)Note.4
50A
MAX. POWERNote.4
1680W
RECOMMENDED BATTERY CAPACITY (AMP HOURS)Note.5
200 ~ 640AH
LEAKAGE CURRENT FROM BATTERY (Typ.)
<1mA

INPUT

VOLTAGE RANGENote.6
90 ~ 264VAC 250 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.98/115VAC, PF>0.95/230VAC at full load
EFFICIENCY (Typ.)Note.7
93%
AC CURRENT (Typ.)
14.8A/115VAC 9.3A/230VAC
INRUSH CURRENT (Typ.)
COLD START 50A at 230VAC
LEAKAGE CURRENT
0.75mA/240VAC (60335-1/2-29), 1.5mA Peak/240VAC (62368-1)

PROTECTION

SHORT CIRCUITNote.8
Protection type : Constant current limiting, charger will shutdown, re-power on to recover
OVER VOLTAGENote.9
43 ~ 52V; Protection type : Shut down and latch off o/p voltage, re-power on to recover
REVERSE POLARITY
Protected internal reverse detection, No damage, re-power on to recover after fault condition is removed
OVER TEMPERATURE
Shut down O/P voltage, recovers automatically after temperature goes down

FUNCTION

CHARGING STAGE
2 or 3 stage selectable through DIP S.W on panel
CHARGING PARAMETERS ADJUSTABLE
Programmable: Constant current(CC), Tapper current(TC), Constant voltage(CV) and Float voltage(FV) can be set through SBP-001 with computer; Manual setting: 4 built-in charging curves adjustable via DIP S.W on panel, Please refer to function manual for more detail
AUTO RANGING FOR CHARGING (Typ.)
Please refer to function manual for more detail (page 8); Charging current adjustable 50~100% by via potentiometer on panel (Only for auto ranging mode)
CANBUS INTERFACE
CANBus 2.0B, Can control, Setting and monitoring(Vo,Io,charging curve, internal temp. and DC output ON/OFF)
CHARGER OK SIGNAL
The TTL signal out, Charger OK = H(4.5 ~ 5.5V) ; Charger failure or protection status =L( -0.5 ~ +0.5V)
BATTERY FULL SIGNAL
The TTL signal out, Battery full = H(4.5 ~ 5.5V ); Charging = L(-0.5 ~ +0.5V)
REMOTE CONTROL
Short : Charger normal work Open : Charger stop charging
TEMPERATURE COMPENSATION
By external NTC
FAN SPEED CONTROL
Depends on internal temperature

ENVIRONMENT

WORKING TEMP.
-30 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT
±0.05%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
CB IEC62368-1,IEC60335-1/2-29, Dekra BS EN/EN62368-1,BS EN/EN60335-1/2-29, UL62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSIONNote 10
Conducted: BS EN/EN55032 (CISPR32) Class B; Radiated: BS EN/EN55032 (CISPR32) Class A; Harmonic Current: BS EN/EN61000-3-2 Class A; Voltage Flicker: BS EN/EN61000-3-3
EMC IMMUNITYNote 10
ESD: BS EN/EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact; Radiated: BS EN/EN61000-4-3 Level 2, 3V/m; EFT / Burst: BS EN/EN61000-4-4 Level 2, 1KV; Surge: BS EN/EN61000-4-5 Level 2, 1KV/Line-Line, Level 3, 2KV/Line-Earth; Conducted: BS EN/EN61000-4-6 Level 2, 3Vrms; Magnetic Field: BS EN/EN61000-4-8 Level 1, 1A/m; Voltage Dips and Interruptions: BS EN/EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

OTHERS

MTBF
478.9K hrs min. Telcordia SR-332 (Bellcore) ; 41.5K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
307.7*184*70mm (L*W*H)
PACKING
2.96Kg; 4pcs/ 14Kg / 2.58CUFT

Technical drawings

NPB-1700-24 Block Diagram
Block Diagram
NPB-1700-24 Derating Curve
Derating Curve
NPB-1700-24 Function Manual
Function Manual
NPB-1700-24 2.Programmable charging curve
2.Programmable charging curve
NPB-1700-24 NPB-1700 series
NPB-1700 series
NPB-1700-24 (NPB-1700) 108 79
(NPB-1700) 108 79
NPB-1700-24 NPB-1700 pin assigment
NPB-1700 pin assigment
NPB-1700-24 SBP-001 pin assigment
SBP-001 pin assigment
NPB-1700-24 ※ Software Interface
※ Software Interface
NPB-1700-24 ※ When using the auto ranging charging curve function,…
※ When using the auto ranging charging curve function,…
NPB-1700-24 (1) Default factory setting is OFF via DC output side…
(1) Default factory setting is OFF via DC output side…
NPB-1700-24 ※ Back to non-auto ranging as following
※ Back to non-auto ranging as following
NPB-1700-24 NPB-1700 series
NPB-1700 series
NPB-1700-24 5.CANBus communication interface
5.CANBus communication interface
NPB-1700-24 Command
Command
NPB-1700-24 PIN6 Charger OK
PIN6 Charger OK
NPB-1700-24 PIN5 Battery Full
PIN5 Battery Full
NPB-1700-24 PIN7 Remote ON-OFF
PIN7 Remote ON-OFF

Typical applications

  • AGV
  • E-Bike, E-Scooter, Camping car, Bus, Specialty vehicles
  • Robotic lawn mower
  • Washing robot
  • Recreation craft, Personal yacht or workboat
  • Surveillance system
  • Telecommunication base station
  • Radio system backup solution
  • Equipments or instruments with back-up battery

Downloads

FAQ

Can I use the Mean Well NPB-1700-24 to charge a 24V battery bank in industrial automation equipment?

Yes. This charger is built for 24V battery systems and provides a 28.8V default boost charge voltage with up to 50A constant charging current, and 1680W power for higher-capacity charging. It is suitable for both lead-acid and Li-ion battery chemistries.

Is the NPB-1700-24 suitable for large backup battery systems in IT or embedded equipment?

It can fit 24V backup battery systems where the charging profile matches lead-acid or Li-ion batteries and the AC source is within 90-264VAC. With a 28.8V boost charge voltage, 50A current and a recommended battery capacity of 200-640Ah, it is intended for higher-power battery charging.

Can this charger be used for high-current 24V battery charging in industrial vehicles or mobile equipment?

Yes, if the system uses a 24V lead-acid or Li-ion battery pack and needs a charger rated at 28.8V and 50A. The 1680W output and 200-640Ah recommended battery capacity suit high-current 24V charging.

Can the NPB-1700-24 work in facilities with different AC mains conditions?

Yes. Its 90-264VAC (250-370VDC) input range supports operation across a wide range of AC supply conditions, which is useful for industrial and commercial sites with different mains standards. The charger delivers a 28.8V default boost charge voltage with up to 50A charging current.

Is the NPB-1700-24 suitable for outdoor or harsh-temperature locations?

The specified operating temperature range is -30°C to +70°C (refer to the derating curve), so it is rated for very cold and hot environments within that range. The provided specs do not list an IP rating, so exposed outdoor use should not be assumed from this data alone.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8656309354816, "variants" :[{ "context":"default", "variant_id": 46625522450752, "sku":"NPB-1700-24", "inventory_qty" : 2, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$421.53\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well NPB-1700-24 Battery Charger 1680W 24V - Suitable for Lead-acid and Li-ion 50A
Mean Well

Mean Well NPB-1700-24 Battery Charger 1680W 24V - Suitable for Lead-acid and Li-ion 50A

$421.53 USD

NPB-1700-24 is the model of this series: typical efficiency 93%.

NPB-1700 is a miniaturized, versatile, and ultra-wide voltage intelligent charger. It utilizes a fully digital control design with automatic battery voltage detection technology, with five key features including intelligent, versatile, user friendly, safe, and compact. The series have four models with output voltage ranges of 10.5~21V, 21~42V and 42~80V respectively. The charging voltage range of each model is wide enough to cover a variety of different battery voltages and battery chemistries, and there is a built-in intelligent voltage detection charging mode (Note this mode is set to OFF by factory default and is suitable for lithium batteries with BMS only). The NPB-1700 can pair with MEAN WELL's SBP-001 programmer for digital configuration, such as adjust charging voltage/current, and set charging cycle time to protect battery lifetime. Through the user-friendly DIP S.W. on front panel, user may also directly adjust the 2/3 stage charging, current (50~100%), and select between the 4 types of preset charging curves. In addition, a CANBus communication protocol is built in to meet professional applications, which allows remote controlling and monitoring for the status of the charger. In terms of safety, it has intelligent detection for proper battery voltage and connection as well as protection from reverse polarity. It passes ITE IEC/EN/UL62368-1 and household appliance EN60335-1/-2-29 dual safety and 3-year warranty to guarantee reliable operation. The NPB-1700 is truly an intelligent, safe, and reliable universal charger with outstanding cost performance.

Features

  • Auto ranging with ultra-wide charging voltage (10.5~21V, 21~42V, 42~80V; Please refer to page 8 for setting)
  • Built-in CANBus protocol for control, setting and monitoring
  • Programmable charging curve via SBP-001
  • Manual setting for 2/3 stage and 4 built-in charging curves via DIP S.W
  • Multiple protections: Short circuit / Over voltage / Over temperature/ Battery under voltage /Battery reverse polarity (No damage)
  • Charger OK and Battery Full signal
  • Temperature compensation function to prolong battery life (Lead-acid only)
  • -30℃~+70℃ wide operating temperature
  • Thermal controlled DC fan for noise reduction
  • Remote ON/OFF control
  • Smart programmer available (Order NO.: SBP-001, sold separately)
  • Carry handle accessory available(Order NO.: Carry handle, sold separately)
  • Comply with 62368-1 + 60335-1/-2-29 dual certification
  • Suitable for lead-acid (Pb) and li-ion batteries
  • 3 years warranty

Typical applications

  • AGV
  • E-Bike, E-Scooter, Camping car, Bus, Specialty vehicles
  • Robotic lawn mower
  • Washing robot
  • Recreation craft, Personal yacht or workboat
  • Surveillance system
  • Telecommunication base station
  • Radio system backup solution
  • Equipments or instruments with back-up battery
View product