Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
GC30B-5P1J is the model of this series: rated current 1.6A, rated power 27W, typical efficiency 78%.
Features
- Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)(Note.1)
- Universal AC input / Full range
- 2 pole AC Inlet IEC320-C8
- Class II power (without earth pin)
- No load power consumption <1.0W
- Constant current and voltage(CC,CV mode)
- Suitable for continue load
- For high surge current equipment
- Protections: Short circuit / Overload / Over voltage / Over temp.
- 2 colors LED indicate for charging status
- Fully enclosed plastic case
- High reliability
- Approvals: UL / CUL / TUV / EAC / CB / FCC / CE / UKCA
- 2 years warranty
Specifications
OUTPUT
- SAFETY MODEL NO.
- GC30B-5
- DC VOLTAGE SET ATNote.3
- 16.8V
- RATED CURRENT
- 1.6A
- CURRENT RANGE
- 0 ~ 1.6A
- RATED POWER
- 27W
- RIPPLE & NOISE (max.)Note.4
- 100mVp-p
- CHARGING VOLTAGE RANGENote.5
- 16 ~ 17V
- LINE REGULATIONNote.6
- ±0.5%
- LED INDICATOR
- Green LED ON < 100mA, Red LED ON > 250mA
- SETUP, RISE, HOLD UP TIME
- 200ms, 50ms, 16ms at full load
INPUT
- VOLTAGE RANGE
- 90 ~ 264VAC 127 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- EFFICIENCY (Typ.)
- 78%
- AC CURRENT
- 0.7A /100VAC; 0.35A/230VAC
- INRUSH CURRENT (max.)
- 40A/230VAC
- LEAKAGE CURRENT(max.)
- 0.25mA /240VAC
PROTECTION
- OVERLOAD
- 90 ~ 110% Constant current mode and over 300% pulsing mode Protection type : Constant current limiting, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 110 ~ 135% rated output voltage Protection type : Clamp by zener diode
- OVER TEMPERATURE
- IC1_Tj > 130℃ Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT
- WORKING TEMP.
- 0 ~ +50℃(Refer to output load derating curve)
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -20 ~ +85℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- UL62368-1, CSA22.2, BS EN/EN62368-1, EAC TP TC 004 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVAC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55014-1 class B, FCC part 15 Class B, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,11, light industry level, criteria A, EAC TP TC 020
OTHERS
- DIMENSION
- 108*67*36mm (L*W*H)
- PACKING
- 309g; 54pcs / 19kg / CARTON
CONNECTOR
- PLUG
- Standard type P1J: 2.1ψ * 5.5ψ * 11mm, tuning fork type center positive for stock ; Other type available by customer requested
- CABLE
- Standard type 18Awg UL1185 6ft and 4ft for 4.2V~8.4V output only for stock ; Other type available by customer requested
Test conditions and notes6
- 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
- 2.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient.
- 3.DC voltage: The output voltage set at point measure by plug terminal & 0% load.
- 4.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 5.Output charging voltage range is measured from 0% to 100% rated load.
- 6.Line regulation is measured from low line to high line at rated load.
Technical drawings
Downloads
Certificates8
Catalogues1
FAQ
What type of battery charger is the Mean Well GC30B-5P1J?
The GC30B-5P1J is a 27W portable charger with a 16.8V output and 1.6A rated current. It is designed for charging supported battery types using constant current and constant voltage operation, and it includes a 2-color LED charging status indicator.
Which battery chemistries is the GC30B-5P1J intended for?
This model is listed for lead-acid batteries including flooded, gel, and AGM types. It is also described as suitable for certain lithium-ion battery chemistries, including lithium iron and lithium manganese variants.
Is the GC30B-5P1J suitable for portable or field-use equipment?
Yes. This is a portable charger in a compact 108 x 67 x 36 mm case weighing 309g, which supports use where space and portability matter. Its 90 to 264VAC input range also makes it practical for varied business environments.
What protection features are included on the GC30B-5P1J?
The GC30B-5P1J includes overload, over-voltage, and over-temperature protection. Overload uses constant current limiting and over-temperature shuts down the output, both recovering automatically; over-voltage at 110% to 135% of rated output is clamped by a zener diode.
What input range and operating temperature does this charger support?
This model accepts a universal AC input range of 90 to 264VAC and also supports 127 to 370VDC input. Its specified working temperature range is 0 to 50 degrees C, with derating referenced by the manufacturer.
Does the GC30B-5P1J meet common safety and EMC approvals?
Yes. The datasheet lists safety standards UL62368-1, CSA22.2, BS EN/EN62368-1, and EAC TP TC 004, with EMC emission compliance to BS EN/EN55014-1 Class B, FCC Part 15 Class B, and EAC TP TC 020.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.



