Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
EPS-45S-3.3 is the 3.3V output model of this series: rated current 8A, rated power 26.4W, typical efficiency 80%.
EPS-45S is a 45W highly reliable green PCB type industrial power supply with a high power density on the 3” by 2” footprint. It accepts 80~264VAC input and offers various output voltages between 3.3V and 48V. The working efficiency is up to 91% and the extremely low no load power consumption is down below 0.1W. EPS-45S is able to be used for ClassⅡ(no FG) system design.
Features
- 3"×2" miniature size
- Universal AC input / Full range
- ClassⅡ(without FG) installations
- No load power consumption<0.1W
- High efficiency up to 91%
- For 1U applications
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- -30~70℃wide range of operating temperature
- Operating altitude up to 5000 meters
- LED indicator for power on
- 3 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- 3.3V
- RATED CURRENT
- 8A
- CURRENT RANGE
- 0 ~ 8.8A
- RATED POWER
- 26.4W
- PEAK LOAD(10sec.)Note.2
- 29W
- RIPPLE & NOISE (max.)Note.3
- 80mVp-p
- VOLTAGE ADJ.RANGE
- 3.1~3.6V
- VOLTAGE TOLERANCENote.4
- ±2.0%
- LINE REGULATION
- ±0.5%
- LOAD REGULATION
- ±2.0%
- SETUP, RISE TIME
- 500ms, 30ms / 230VAC 500ms, 30ms / 115VAC at full load
- HOLD UP TIME (Typ.)
- 30ms / 230VAC 12ms / 115VAC at full load
INPUT
- VOLTAGE RANGENote.5
- 80 ~ 264VAC
- FREQUENCY RANGE
- 47 ~ 63Hz
- EFFICIENCY (Typ.)
- 80%
- AC CURRENT (Typ.)
- 1.2A / 115VAC 1A / 230VAC
- INRUSH CURRENT (Typ.)
- COLD STAR 30A/115VAC 60A/230VAC
- LEAKAGE CURRENT(max.)
- 0.25mA/264VAC
PROTECTION
- OVERLOAD
- 115 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 3.8~5V Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT
- WORKING TEMP.
- -30 ~ +70℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +85℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃ (0 ~ 50℃)
- OPERATING ALTITUDENote.7
- 5000 meters
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note. 8)
- SAFETY STANDARDS
- UL62368-1, TUV BS EN/EN62368-1, BS EN/EN60335-1, CCC GB4943.1, EAC TP TC 004 approved
- WITHSTAND VOLTAGE
- I/P-O/P: 3KVAC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55032(CISPR32) Class B, BS EN/EN61000-3-2,3, GB9254.1 Class B,GB17625 Class A, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, Heavy industry Level , EAC TP TC 020
OTHERS
- MTBF
- 3334.3K hrs min. Telcordia SR-332 (Bellcore) ; 706.6K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 76.2*50.8*24mm or 3" * 2" *0.945" inch (L*W*H)
- PACKING
- 0.11Kg; 120pcs/14.2Kg/0.94CUFT
Test conditions and notes8
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- 2. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.
- 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
- 4. Tolerance : includes set up tolerance, line regulation and load regulation.
- 5. Derating may be needed under low input voltages. Please check the derating curve for more details.
- 6. Touch current was measured from primary input to DC output.
- 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
- 8. The power supply is considered a component which will be installed into a final equipment. "All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness." The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
Technical drawings
Typical applications
- Industrial electrical equipment
- Mechanical equipment
- Factory automation equipment
- Handheld electronic device
Downloads
Datasheet1
Certificates9
Test reports1
Catalogues1
FAQ
Can I use the EPS-45S-3.3 for a 3.3V embedded controller or industrial logic board?
Yes, this model is a constant voltage supply with a 3.3V output and up to 8A available. That makes it suitable for 3.3V embedded controllers, industrial logic boards, and other low-voltage electronics that fit within its 26.4W rating.
Is the EPS-45S-3.3 a good fit for powering a 3.3V HMI interface or compact automation panel electronics?
It can be a good fit when the panel electronics require regulated 3.3V DC and stay within 26.4W and 8A. Its 76.2 x 50.8 x 24.0 mm size also suits compact internal equipment layouts where board space is limited.
Can this 3.3V power supply be used for industrial communication or embedded gateway hardware?
Yes, if the hardware is designed for constant 3.3V input and the total draw does not exceed 8A or 26.4W. That aligns well with many low-voltage embedded communication and gateway assemblies used inside control equipment.
Would the EPS-45S-3.3 work for low-voltage test fixtures or bench-level electronics inside industrial environments?
It is appropriate for low-voltage electronics that need a stable 3.3V constant voltage source and fit within 26.4W. The operating temperature range of -30°C to +70°C also supports use in a wide range of indoor industrial conditions.
Is the EPS-45S-3.3 suitable for outdoor or exposed environments?
No IP rating is listed in the provided specs, so this unit is better treated as an internal power supply for protected equipment rather than an exposed outdoor supply. Its operating temperature range is -30°C to +70°C, but environmental suitability should still be judged with the lack of a stated IP rating in mind.
How does the EPS-45S-3.3 compare with the other EPS-45S models?
Within the EPS-45S group, the available outputs are EPS-45S-3.3 at 26.4W, 3.3V, 8A; EPS-45S-5 at 40W, 5V, 8A; EPS-45S-7.5 at 40.5W, 7.5V, 5.4A; EPS-45S-12 at 45.6W, 12V, 3.8A; EPS-45S-15 at 45W, 15V, 3A; EPS-45S-24 at 45.6W, 24V, 1.9A; and EPS-45S-48 at 45.1W, 48V, 0.94A. This model is the lowest-voltage option in that set and also has the lowest wattage rating at 26.4W.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.



