☎ (888) 228 9138

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well HLP-80H-15 PCB Power Supply 75W 15V 5A

CV+CCoutput voltage/current level adjustable3-in-1 dimmingclass 2
SKU HLP-80H-15
$49.32 USD
Shipping calculated at checkout.
Available to order
|

Overview

HLP-80H-15 is the 15V output model of this series: rated current 5A, rated power 75W, typical efficiency 88.5%.

Features

  • Universal AC input / Full range (up to 305VAC)
  • Built-in active PFC function
  • Protections: Short circuit / Over current / Over voltage / Over temperature
  • Cooling by free air convection
  • Output constant current level adjustable
  • Class 2 power unit
  • Three in one dimming function (1~10Vdc or PWM signal or resistance)
  • Suitable for built in LED lighting system
  • Suitable for dry / damp locations
  • 100% full load burn-in test
  • 3 years warranty

Specifications

HLP-80H-15Specifications from the official datasheet (2026-02-09 edition)

OUTPUT

DC VOLTAGE
15V
CONSTANT CURRENT REGIONNote.4
9 ~ 15V
RATED CURRENT
5A
RATED POWER
75W
RIPPLE & NOISE (max.)Note.2
150mVp-p
VOLTAGE ADJ. RANGE
13.5 ~ 17V
CURRENT ADJ. RANGE
Can be adjusted by internal potentiometer
CURRENT ADJ. RANGE
4 ~ 5A
VOLTAGE TOLERANCENote.3
±2.0%
LINE REGULATION
±0.5%
LOAD REGULATION
±1.5%
SETUP, RISE TIMENote.6
1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% load
HOLD UP TIME (Typ.)
16ms at full load 230VAC /115VAC

INPUT

VOLTAGE RANGENote.5
90 ~ 305VAC 127 ~ 431VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.96/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION
THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input
EFFICIENCY (Typ.)
88.5%
AC CURRENT (Typ.)
0.85A / 115VAC 0.425A / 230VAC 0.4A / 277VAC
INRUSH CURRENT(Typ.)
COLD START 70A(twidth=525μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER
3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC

PROTECTION

OVER CURRENTNote.4
95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
18 ~ 24V
OVER TEMPERATURE
Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.
-40 ~ +70℃(Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), BS EN/EN61347-1, BS EN/EN61347-2-13, EAC TP TC 004 approved ; Design refer to UL60950-1
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (≧60% load, 12V model ≧65% load) ; BS EN/EN61000-3-3, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, BS EN/EN55024, light industry level (surge 4KV), criteria B, EAC TP TC 020

OTHERS

MTBF
2786.8K hrs min. Telcordia SR-332(Bellcore) ; 316.2K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
167*53*29.5mm (L*W*H)
PACKING
0.27Kg; 36pcs/11.2Kg/0.67CUFT
Test conditions and notes11
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. Please refer to "DRIVING METHODS OF LED MODULE".
  5. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
  6. 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
  7. 7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies." (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
  8. 8. Heat Sink HS1,HS2 can not be shorted.
  9. 9. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
  10. 10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
  11. 12. This product is not suitable for LED lighting applications in China.

Technical drawings

HLP-80H-15 Mechanical Specification
Mechanical Specification
HLP-80H-15 Block Diagram
Block Diagram
HLP-80H-15 Derating Curve
Derating Curve
HLP-80H-15 Power Factor Characteristic
Power Factor Characteristic
HLP-80H-15 EFFICIENCY vs LOAD (48V Model)
EFFICIENCY vs LOAD (48V Model)
HLP-80H-15 Illustration (page 4)
Illustration (page 4)
HLP-80H-15 Illustration (page 4)
Illustration (page 4)

Downloads

FAQ

What type of applications is the Mean Well HLP-80H-15 designed for?

The HLP-80H-15 is an open frame AC/DC power supply intended for built-in LED lighting systems and other OEM applications that need a regulated 15V DC output. Its 3-in-1 dimming and compact PCB-style form factor make it better suited to embedded commercial or industrial equipment than general consumer use.

What are the main output specifications of the HLP-80H-15?

This model is rated for 75W total output power and provides a 15V DC output. Its rated output current is 5A, which makes it appropriate for applications that need a moderate-power 15V supply from an AC input source.

What input voltage range does the HLP-80H-15 support?

The HLP-80H-15 accepts a universal AC input range of 90 to 305VAC, and it also supports 127 to 431VDC input. That wide range helps buyers standardize on one model across regions or projects with varying mains conditions.

Can the HLP-80H-15 be used in demanding temperature conditions?

Yes. This model is specified for operation from -40C to +70C, subject to the manufacturer's derating guidance at higher temperatures. Working humidity is specified as 20-95% RH non-condensing, which supports use in a broad range of indoor commercial environments.

What protection features are built into the HLP-80H-15?

The HLP-80H-15 includes short circuit, over current, over voltage, and over temperature protection. According to the product data, short circuit protection uses hiccup mode with automatic recovery, while over current protection uses constant current limiting and also recovers automatically after the fault is removed.

What distinguishes the HLP-80H-15 from a basic fixed-input power supply?

Compared with a simpler power supply, the HLP-80H-15 offers a wide 90-305VAC input range, built-in active PFC, 3-in-1 dimming, and protection coverage for multiple fault conditions. It is also purpose-positioned for built-in LED lighting applications rather than only general DC conversion.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":9873768743232, "variants" :[{ "context":"default", "variant_id": 50917383536960, "sku":"HLP-80H-15", "inventory_qty" : 0, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$49.32\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well HLP-80H-15 PCB Power Supply 75W 15V 5A
Mean Well

Mean Well HLP-80H-15 PCB Power Supply 75W 15V 5A

$49.32 USD

HLP-80H-15 is the 15V output model of this series: rated current 5A, rated power 75W, typical efficiency 88.5%.

Features

  • Universal AC input / Full range (up to 305VAC)
  • Built-in active PFC function
  • Protections: Short circuit / Over current / Over voltage / Over temperature
  • Cooling by free air convection
  • Output constant current level adjustable
  • Class 2 power unit
  • Three in one dimming function (1~10Vdc or PWM signal or resistance)
  • Suitable for built in LED lighting system
  • Suitable for dry / damp locations
  • 100% full load burn-in test
  • 3 years warranty
View product

  • Call us

    (888) 228 9138

  • Email us

    contact@wellforces.com

  • Business Hours

    Mon-Fri
    EST 9:00am-5:30pm

  • Wholesale and Trade Account

    Let's grow together
Back to top