☎ (888) 228 9138

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well HLP-60H-36 PCB Power Supply 60W 36V 1.7A

CV+CCoutput voltage/current level adjustable3-in-1 dimmingclass 2
SKU HLP-60H-36
$39.59 USD
Shipping calculated at checkout.
Available to order
|

Overview

HLP-60H-36 is the 36V output model of this series: rated current 1.7A, rated power 61.2W, typical efficiency 90%.

Features

  • Universal AC input / Full range (up to 305VAC)
  • Built-in active PFC function
  • Protections: Short circuit / Over current / Over voltage / Over temperature
  • Cooling by free air convection
  • Output constant current level adjustable
  • Class 2 power unit
  • Three in one dimming function (1~10Vdc or PWM signal or resistance)
  • Suitable for built in LED lighting system
  • Suitable for dry / damp locations
  • 100% full load burn-in test
  • 3 years warranty

Specifications

HLP-60H-36Specifications from the official datasheet (2026-02-09 edition)

OUTPUT

DC VOLTAGE
36V
CONSTANT CURRENT REGIONNote.4
21.6 ~ 36V
RATED CURRENT
1.7A
RATED POWER
61.2W
RIPPLE & NOISE (max.)Note.2
200mVp-p
VOLTAGE ADJ. RANGE
33 ~ 40V
CURRENT ADJ. RANGE
1 ~ 1.7A
VOLTAGE TOLERANCENote.3
±1.0%
LINE REGULATION
±0.5%
LOAD REGULATION
±0.5%
SETUP, RISE TIMENote.6
500ms, 80ms at full load 230VAC / 115VAC
HOLD UP TIME (Typ.)
16ms/230VAC 16ms/115VAC at full load

INPUT

VOLTAGE RANGENote.5
90 ~ 305VAC 127 ~ 431VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION
THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input
EFFICIENCY (Typ.)
90%
AC CURRENT (Typ.)
0.64A / 115VAC 0.32A / 230VAC 0.3A / 277VAC
INRUSH CURRENT (Typ.)
COLD START 55A(twidth=265μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER
9 units (circuit breaker of type B) / 16 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC

PROTECTION

OVER CURRENTNote.4
95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
41 ~ 49V
OVER TEMPERATURE
Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.
-40 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), BS EN/EN61347-1, BS EN/EN61347-2-13, EAC TP TC 004 approved ; design refer to UL60950-1, BS EN/EN60335-1
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (≧60% load) ; BS EN/EN61000-3-3, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, BS EN/EN55024, light industry level (surge 4KV), EAC TP TC 020

OTHERS

MTBF
3130.5K hrs min. Telcordia SR-332(Bellcore) ; 288.5K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
147*53*27mm (L*W*H)
PACKING
0.2Kg;72pcs/15.4Kg/1.01CUFT
Test conditions and notes10
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. Please refer to "DRIVING METHODS OF LED MODULE".
  5. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
  6. 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
  7. 7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies." (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
  8. 8. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
  9. 9. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
  10. 10. This product is not suitable for LED lighting applications in China.

Technical drawings

HLP-60H-36 Mechanical Specification
Mechanical Specification
HLP-60H-36 Block Diagram
Block Diagram
HLP-60H-36 Derating Curve
Derating Curve
HLP-60H-36 Power Factor Characteristic
Power Factor Characteristic
HLP-60H-36 EFFICIENCY vs LOAD (48V Model)
EFFICIENCY vs LOAD (48V Model)
HLP-60H-36 Illustration (page 4)
Illustration (page 4)
HLP-60H-36 Illustration (page 4)
Illustration (page 4)

Downloads

FAQ

What is the Mean Well HLP-60H-36 designed for?

The HLP-60H-36 is a 60W, 36V PCB power supply intended for built-in LED lighting systems. It is designed for applications that need a compact AC-DC power unit with constant current level adjustment and dimming support.

What are the key electrical ratings of the HLP-60H-36?

This model provides a 36V output and is rated for 1.7A current with a 60W class power level. It accepts a universal 90-305VAC input range and also supports 127-431VDC input.

Does the HLP-60H-36 support dimming control?

Yes, the HLP-60H-36 includes three-in-one dimming capability. It supports 1-10Vdc, PWM signal, and resistance-based dimming control.

Is the HLP-60H-36 suitable for demanding environments?

This model is rated for operation from -40°C to +70°C, subject to the manufacturer's derating guidance. Its working humidity rating is 20 to 95% RH non-condensing, and it can be stored from -40°C to +80°C.

What protection features are built into the HLP-60H-36?

The HLP-60H-36 includes protection for short circuit, over current, over voltage, and over temperature conditions. Depending on the fault type, it uses constant current limiting, hiccup recovery, or shutdown with re-power-on recovery.

What makes the HLP-60H-36 a strong choice for OEM and commercial LED applications?

The unit combines universal AC input, active PFC, three-in-one dimming, and 90% typical efficiency in a compact 147 x 53 x 27mm PCB-format design. It is also rated for an MTBF of 3130.5K hours min. (Telcordia SR-332), which supports reliability-focused commercial use.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":9886863458624, "variants" :[{ "context":"default", "variant_id": 50962937708864, "sku":"HLP-60H-36", "inventory_qty" : 0, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$39.59\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well HLP-60H-36 PCB Power Supply 60W 36V 1.7A
Mean Well

Mean Well HLP-60H-36 PCB Power Supply 60W 36V 1.7A

$39.59 USD

HLP-60H-36 is the 36V output model of this series: rated current 1.7A, rated power 61.2W, typical efficiency 90%.

Features

  • Universal AC input / Full range (up to 305VAC)
  • Built-in active PFC function
  • Protections: Short circuit / Over current / Over voltage / Over temperature
  • Cooling by free air convection
  • Output constant current level adjustable
  • Class 2 power unit
  • Three in one dimming function (1~10Vdc or PWM signal or resistance)
  • Suitable for built in LED lighting system
  • Suitable for dry / damp locations
  • 100% full load burn-in test
  • 3 years warranty
View product

  • Call us

    (888) 228 9138

  • Email us

    contact@wellforces.com

  • Business Hours

    Mon-Fri
    EST 9:00am-5:30pm

  • Wholesale and Trade Account

    Let's grow together
Back to top