Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well UHP-1000-12 Power Supply 960W 12V 80A

Name: Mean Well UHP-1000-12 Power Supply 960W 12V 80A
Brand: Mean Well
SKU: UHP-1000-12
Price: 306.0 USD
Availability: InStock

slim and low profilefanless design

SKU UHP-1000-12

$306.00 USD

Shipping calculated at checkout.

Select model — 5 in this family

UHP-1000-12

UHP-200-12 200W 12V In stock$60.56 USD

UHP-350-12 350W 12V In stock$77.13 USD

UHP-500-12 500W 12V In stock$114.67 USD

UHP-750-12 750W 12V Low stock$232.24 USD

UHP-1000-12 1000W 12V In stock$306.00 USD

Product variants

In stock

Overview

UHP-1000-12 is the 12V output model of this series: rated current 80A, rated power 960W, typical efficiency 94%.

UHP-1000 series is a 1000W single-output slim type power supply with 41mm of low profile design. Adopting the full range 90~264VAC input, the entire series provides an output voltage line of 12V,24V,36V and 48V. In addition to the high efficiency up to 96%, that the whole series operates from -30℃ ~ 70℃ under air convection without fan. UHP-1000 has the complete protection functions and 5G anti-vibration capability; It is complied with the international safety regulations such as TUV BS EN/EN62368-1, UL62368-1. UHP-1000 series serves as a high performance power supply solution for various industrial applications.

Features

Slim and Low profile (41mm)
Fanless and conduction-cooled design
Withstand 300VAC surge input for 5 seconds
Built-in active PFC function
-30~+70℃ working temperature
Output voltage and constant current level programmable
Protections: Short circuit / Overload / Over voltage / Over temperature
Built-in remote ON-OFF control
DC OK active signal
Operating altitude up to 5000 meter (Note.7)
LED indicator for power on
5 years warranty

Specifications

UHP-1000-12Specifications from the official datasheet (2024-09-04 edition)

OUTPUT

DC VOLTAGE: 12V
RATED CURRENT: 80A
RATED POWER: 960W
RIPPLE & NOISE (max.)^Note.2: 150mVp-p
VOLTAGE ADJ. RANGE: By built-in potentiometer, SVR
VOLTAGE ADJ. RANGE: 12~14.4V
VOLTAGE TOLERANCE^Note.3: ±1.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±0.5%
SETUP, RISE TIME^Note.4: 1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load
HOLD UP TIME (Typ.): 12ms/230VAC 12ms/115VAC

INPUT

VOLTAGE RANGE^Note.4: 90 ~ 264VAC 250 ~ 370VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.)^Note.4: PF≥0.95/230VAC PF≥0.99/115VAC at full load
EFFICIENCY (Typ.): 94%
AC CURRENT (Typ.): 10.1A/115VAC 5.3A/230VAC
INRUSH CURRENT (Typ.): Cold start 20A/115VAC 40A/230VAC
LEAKAGE CURRENT: <0.75mA / 240VAC

PROTECTION

OVERLOAD: 105~120% rated output power Protection type: Constant current limiting with delay shutdown after 3 seconds, re-power on to recover
SHORT CIRCUIT: Protection type: Constant current limiting with delay shutdown after 3 seconds, re-power on to recover
OVER VOLTAGE: 14.5 ~ 16V Protection type: Shut down O/P voltage, re-power on to recover
OVER TEMPERATURE: Protection type: Shut down O/P voltage, recovers automatically after temperature goes down

FUNCTION

OUTPUT VOLTAGE PROGRAMMABLE(PV)^{Note 5}: Adjustment of output voltage is allowable to 50 ~ 120% of nominal output voltage Please refer to the Function Manual.
OUTPUT CURRENT PROGRAMMABLE(PC)^{Note 5}: Adjustment of constant current level is allowable to 20 ~ 100% of rated current. Please refer to the Function Manual.
REMOTE ON/OFF CONTROL: Power ON: "Low" <0 ~ 0.5V or Short circuit Power OFF: "Hi" >2 ~ 5V or Open circuit
AUXILIARY POWER: 12V@0.5A tolerance±10%, ripple 150mVp-p
DC-OK SIGNAL: The TTL signal out, PSU turn on = 4.5 ~ 5.5V; PSU turn off = -0.1 ~ 0.5V. Please refer to the Function Manual.

ENVIRONMENT

WORKING TEMP.: -30 ~ +70℃(Refer to “Derating Curve")
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE: I/P-O/P: 3.75KVAC I/P-FG: 2KVAC O/P-FG: 1.25KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG,O/P-FG: 100M Ohms/500VDC/25℃/ 70%RH
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032 (CISPR32) Class B
Radiated BS EN/EN55032 (CISPR32) Class B
Harmonic Current BS EN/EN61000-3-2 Class A
Voltage Flicker BS EN/EN61000-3-3
EMC IMMUNITY: BS EN/EN55035, BS EN/EN61000-6-2

Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact
Radiated BS EN/EN61000-4-3 Level 3
EFT / Burst BS EN/EN61000-4-4 Level 3
Surge BS EN/EN61000-6-2 2KV/Line-Line 4KV/Line-Earth
Conducted BS EN/EN61000-4-6 Level 3
Magnetic Field BS EN/EN61000-4-8 Level 4
Voltage Dips and Interruptions BS EN/EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

Parameter	Standard	Test Level
Conducted	BS EN/EN55032 (CISPR32)	Class B
Radiated	BS EN/EN55032 (CISPR32)	Class B
Harmonic Current	BS EN/EN61000-3-2	Class A
Voltage Flicker	BS EN/EN61000-3-3

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, 8KV air; Level 2, 4KV contact
Radiated	BS EN/EN61000-4-3	Level 3
EFT / Burst	BS EN/EN61000-4-4	Level 3
Surge	BS EN/EN61000-6-2	2KV/Line-Line 4KV/Line-Earth
Conducted	BS EN/EN61000-4-6	Level 3
Magnetic Field	BS EN/EN61000-4-8	Level 4
Voltage Dips and Interruptions	BS EN/EN61000-4-11	>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

OTHERS

MTBF: 662.3K hrs min. Telcordia SR-332 (Bellcore) ; 69.8K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 240*115*41mm (L*W*H)
PACKING: 1.74kg ; 8pcs/14.9kg/0.74CUFT

Test conditions and notes7

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the derating curve and Static characteristics for more details.
5. PV/PC functions when users do not use SVR.
6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies. " (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

Technical drawings

UHP-1000-12 BLOCK DIAGRAM — BLOCK DIAGRAM

UHP-1000-12 STATIC CHARACTERISTIC — STATIC CHARACTERISTIC

UHP-1000-12 DERATING CURVE — DERATING CURVE

UHP-1000-12 FUNCTION MANUAL — FUNCTION MANUAL

UHP-1000-12 Illustration (page 5) — Illustration (page 5)

UHP-1000-12 4.DC-OK Signal — 4.DC-OK Signal

UHP-1000-12 MECHANICAL SPECIFICATION — MECHANICAL SPECIFICATION

UHP-1000-12 Operate with additional aluminum plate and fan — Operate with additional aluminum plate and fan

UHP-1000-12 INSTALLATION MANUAL — INSTALLATION MANUAL

Typical applications

Industrial automation machinery
Industrial control system
Mechanical and electrical equipment
Electronic instruments, equipment or apparatus
Test and measurement instrument
Laser related machine
Charging related equipment
Household appliances
Power Sourcing Equipment of PoE (48V model: DC O/P range 48~57.6V)

Downloads

Certificates5

Mean Well UHP-1000-TUV Certificate PDF Download

Mean Well UHP-1000-CB Certificate PDF Download

Mean Well UHP-1000-EMC Certificate PDF Download

Mean Well UHP-1000-CE-dec Certificate PDF Download

Mean Well UHP-1000-UK-dec Certificate PDF Download

Test reports1

Mean Well UHP-1000-12 Test Report PDF Download

Catalogues2

Mean Well Catalog (Industrial) PDF Download

Mean Well Sign Panel Catalog PDF Download

FAQ

Can I use the UHP-1000-12 for a high-current 12V industrial automation system?

This power supply provides 12V constant-voltage output at 960W with 80A available output current. That makes it suitable for 12V automation or control systems that need substantially more current than lower-power 12V supplies.

Is the UHP-1000-12 a fit for 12V IT or embedded equipment with heavy DC load demand?

It is positioned for high-load 12V applications because the output is 12V at up to 80A, with 960W total power. The wide 90-264VAC input range also helps when the AC source varies across common input conditions.

Can the UHP-1000-12 support a centralized 12V power architecture instead of multiple small supplies?

For systems built around a single 12V bus, this model offers 960W total capacity and 80A output current from one constant-voltage supply. Whether it is enough depends on the total 12V load staying within those stated limits.

What are the main differences between the UHP-1000-12, UHP-1000-24, UHP-1000-36, and UHP-1000-48?

Within the UHP-1000 group, UHP-1000-12 is 960W at 12V and 80A, UHP-1000-24 is 1008W at 24V and 42A, UHP-1000-36 is 1008W at 36V and 28A, and UHP-1000-48 is 1008W at 48V and 21A. The listed shared platform specs include 90-264VAC input, 240 x 115 x 41 mm dimensions, 1.74 kg weight, -30 C to +70 C operating temperature, UL62368-1/TUV/EN62368-1/EAC TP TC 004 safety standards, 5-year warranty, and a slim low-profile fanless design.

Is the UHP-1000-12 suitable for outdoor cabinets or dusty industrial areas?

The operating temperature range is -30 C to +70 C, so the electrical spec supports a broad indoor temperature window. No IP rating is listed, so the provided data does not confirm outdoor, washdown, or dust-tight suitability.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":8650788176192, "variants" :[{ "context":"default", "variant_id": 46615990534464, "sku":"UHP-1000-12", "inventory_qty" : 61, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$306.00\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }