Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
SKM30C-15 is the 15V output model of this series: rated power 30W, typical efficiency 90%.
Features
- 2"x1" compact size
- 2:1 wide input range
- High efficiency up to 90%
- 1500VDC I/O isolation
- Built-in remote ON/OFF control
- Built-in trimming output
- Comply with CE / FCC without external components
- Protections: Short circuit / Overload / Input and Output Over voltage
- Cooling by free air convection
- Six-sided shield metal case
- 100% burn-in test
- Low cost / High reliability
- Approvals: FCC / EAC / CE / UKCA
- 2 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- 15V
- CURRENT RANGE
- 0.2 ~ 2A
- RATED POWER
- 30W
- RIPPLE & NOISE (max.)Note.2
- 120mVp-p
- LINE REGULATIONNote.3
- ±0.2%
- LOAD REGULATIONNote.4
- ±0.5%
- VOLTAGE ACCURACY
- ±2.0%
- SWITCHING FREQUENCY
- 300KHz typ.
- EXTERNAL CAPACITANCE LOAD (max.)
- 100uF
- EXTERNAL TRIM Adj. RANGE(Typ.)
- -20 ~ +10%
INPUT
- VOLTAGE RANGE
- 36 ~ 75VDC
- UNDER VOLTAGE SHUTDOWN
- 32VDC
- EFFICIENCY (Typ.)
- 90%
- DC CURRENT Full load
- 700mA
- DC CURRENT No load
- 30mA
- FILTER
- Pi network
- REMOTE CONTROL
- Power ON : R.C ~ -Vin > 2.5V ~ 30VDC or open circuit ; Power OFF : R.C ~ -Vin < 0.5VDC or short
- PROTECTION
- Fuse recommended
PROTECTION (Note. 5)
- OVER CURRENT
- 110% ~ 180% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
- SHORT CIRCUIT
- All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE Input(Typ.)
- >80 ~ 100VDC input voltage Protection type : Shut down o/p voltage, recovers automatically after fault condition is removed
- OVER VOLTAGE Output(Typ.)
- 5Vo : 7V ~ 8.95V ; 12Vo : 15V ~ 19.2V ; 15Vo : 18V ~ 23.3V Protection type : Clamp by TVS diode
ENVIRONMENT
- WORKING TEMP.
- -40 ~ +75℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -55 ~ +125℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- EAC TP TC 020/2011 (EAC TP TC 004 for 48Vin type only) approved
- WITHSTAND VOLTAGE
- I/P-O/P:1.5KVDC
- ISOLATION RESISTANCE
- I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/ EN55032 Class A, FCC part 15 Class A without external components, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/ EN61000-4-2,3,4,5,6,8, light industry level, criteria A, EAC TP TC 020
OTHERS
- MTBF
- 700Khrs min. MIL-HDBK-217F(25℃)
- DIMENSION
- 50.8*25.4*11.2 mm or 2"*1"*0.44" inch (L*W*H)
- PACKING
- 31.2g ; 10pcs/per tube, 400pcs/40 tube/per carton
Test conditions and notes5
- 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 3.Line regulation is measured from low line to high line at rated load.
- 4.Load regulation is measured from 10% to 100% rated load.
- 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
Technical drawings
Downloads
FAQ
Can I use the SKM30C-15 to power a 15V industrial controller or HMI?
It can fit 15V equipment that needs constant voltage output up to 2A. This model is rated for 30W with a 15V output, so it is suited to industrial control loads that stay within those limits.
Is the SKM30C-15 suitable for embedded systems that require a steady 15V rail?
Yes, it is built for constant voltage operation with a 15V output and 2A output current. For embedded designs that need up to 30W and can use the listed 36-75VAC input range, its electrical rating matches that requirement.
Can I use this DC-DC converter in automation equipment with a wide input range?
It is intended for systems that need a 15V constant voltage output and accept the stated 36-75VAC input range. With 30W total power and 2A output current, it can fit automation loads that remain inside those limits.
Is the SKM30C-15 a good fit for compact IT or control hardware with limited space?
It is relatively compact at 50.8 × 25.4 × 11.2 mm and weighs 0.0312 kg. That size can make it easier to use in compact IT, embedded, or control equipment that still needs 15V output at up to 2A.
How does the SKM30C-15 compare with the other SKM30C series models?
The SKM30C-15 is rated at 30W with 15V output and 2A output current. In the same series, the SKM30C-05 is 30W with 5V output and 6A, and the SKM30C-12 is 30W with 12V output and 2.5A.
Can the SKM30C-15 be used outdoors or in harsh temperature conditions?
The operating temperature range is -40°C to +75°C, so it is specified for demanding temperature conditions within that range. An IP rating is not listed in the provided specs, so outdoor exposure or unenclosed use is not confirmed by the information provided.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.






