Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SKM10B-15 DC-DC Converter - 10W - 18~36V in 15V out 666mA

SKU SKM10B-15
$22.90 USD
Shipping calculated at checkout.
In stock
|

Overview

SKM10B-15 is the 15V output model of this series: rated power 10W, typical efficiency 88%.

SKM10 and DKM10 series are 10W isolated and regulated module type DC-DC converter with DIP 1"x1" package. It features international standard pins, a high efficiency up to 90%, wide working temperature range -40~+85℃, 1.5KVDC I/P-O/P isolation voltage, Compliance to BS EN/EN55032 radiated Class A without additional components , continuous-mode short circuit protection, etc. The models account for different input voltage 4.7~9V, 9~18V, 18~36V and 36~75V 2:1 wide input range, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.

Features

  • DIP 1"x1" package with industry standard pinout
  • 2:1 wide input range
  • Operating temperature range -40 ~ +85℃
  • No minimum load required
  • Comply to BS EN/EN55032 radiated Class A without additional components
  • High efficiency up to 90%
  • Protections: Short circuit (Continuous) / Overload / Over voltage / Input under voltage
  • 1.5KVDC I/O isolation
  • Remote ON/OFF control and Triming output (±10%)
  • 3 years warranty

Specifications

SKM10B-15Specifications from the official datasheet (2024-04-30 edition)

MODEL SELECTION TABLE

INPUT VOLTAGE (RANGE)
24V (18 ~ 36V)
INPUT CURRENT NO LOAD
25mA
INPUT CURRENT FULL LOAD
478mA
OUTPUT VOLTAGE
15V
OUTPUT CURRENT
666mA
EFFICIENCY (Typ.)
88%
CAPACITOR LOAD (MAX.)* For each output
690μF

INPUT

VOLTAGE RANGE
18~36Vdc ,
SURGE VOLTAGE (100ms max.)
5Vin models : 12Vdc, 12Vin models : 25Vdc, 24Vin models : 50Vdc, 48Vin models : 100Vdc
FILTER
Pi type
PROTECTION
Fuse recommended. 5Vin models: 5A delay time Type, 12Vin models: 4A delay time Type, 24Vin models: 2A delay time Type, 48Vin models: 1A delay time Type
INTERNAL POWER DISSIPATION
500mW

OUTPUT

VOLTAGE ACCURACY
±1.5%
RATED POWER
10W
RIPPLE & NOISENote.2
50mVp-p
LINE REGULATIONNote.3
±0.2%
LOAD REGULATIONNote.4
Single output models: ±0.2%, Dual output models:±1%
SWITCHING FREQUENCY (Typ.)
350KHz
EXTERNAL TRIM ADJ. RANGE (Typ.)
±10% (Single output model only)

PROTECTION

SHORT CIRCUIT
Protection type : Continuous, automatic recovery
OVERLOAD
110 ~ 140% rated output power Protection type : Recovers automatically after fault condition is removed
OVER VOLTAGE
Protection type : Clamp by diode
UNDER VOLTAGE LOCKOUT Start-up voltage
5Vin: 4.4Vdc, 12Vin: 8.8Vdc, 24Vin: 17Vdc, 48Vin: 34Vdc
UNDER VOLTAGE LOCKOUT Shutdown voltage
5Vin: 4.2Vdc, 12Vin: 8Vdc, 24Vin: 16Vdc, 48Vin: 32Vdc

FUNCTION

REMOTE CONTROL
Power ON: R.C. ~ -Vin >5.5~75Vdc or open circuit ; Power OFF: R.C. ~ -Vin <1.2Vdc or short

ENVIRONMENT

COOLING
Free-air convection
WORKING TEMP.
-40 ~ +85℃ (Refer to "Derating Curve")
CASE TEMPERATURE
+105℃ max.
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT
0.03% / ℃ (0 ~ 71℃)
SOLDERING TEMPERATURE
1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.5)

SAFETY STANDARDS
EAC TP TC 020/2011 (EAC TP TC 004 for 48Vin type only) approved
WITHSTAND VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.)
1000pF
EMC EMISSION
ParameterStandardTest Level
ConductedBS EN/EN55032(CISPR32)N/A
RadiatedBS EN/EN55032(CISPR32)Class A
EMC IMMUNITY
ParameterStandardTest Level
ESDBS EN/EN61000-4-2Level 2, ±8KV air, ±4KV contact
Radiated SusceptibilityBS EN/EN61000-4-3Level 2, 3V/m
EFT/BurstsBS EN/EN61000-4-4Level 1, 0.5KV
SurgeBS EN/EN61000-4-5Level 1, 0.5KV Line-Line
ConductedBS EN/EN61000-4-6Level 2, 3V(e.m.f.)
Magnetic FieldBS EN/EN61000-4-8Level 2, 3A/m

OTHERS

MTBF
1200Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H)
25.4*25.4*10.2mm (1*1*0.4 inch)
CASE MATERIAL
Black coated copper with Non-Conductive Base
PACKING
18.3g ; 12pcs/per tube, 600pcs/50 tube/per carton
Test conditions and notes5
  1. 1.All parameters are specified at normal input(E:5Vdc, A:12Vdc, B:24Vdc, C:48Vdc), rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 10% to 100% rated load.
  5. 5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

SKM10B-15 SKM10 & DKM10 series
SKM10 & DKM10 series
SKM10B-15 SKM10 & DKM10 series (2)
SKM10 & DKM10 series (2)
SKM10B-15 Plug Assignment
Plug Assignment
SKM10B-15 Packing
Packing

Typical applications

  • Telecom/ datacom system
  • Wireless network
  • Industrial control facility
  • Instrument
  • Analyzer
  • Detector
  • Data switch

Downloads

FAQ

Can I use the SKM10B-15 to power a 15V industrial sensor or transmitter from a 18-36VDC control supply?

Yes, this model is designed for a 18-36VDC input range and provides a constant 15V output. With a 10W rating, it fits lower-power 15V industrial sensing or signal-conditioning loads that stay within the unit's listed output capacity.

Is the SKM10B-15 suitable for a compact embedded or automation board that needs regulated 15V power?

It can be a fit where the board requires a constant 15V rail and the available source is within 18-36VDC. The 10W power rating and 25.4 × 25.4 × 10.2 mm package make it more appropriate for compact, lower-power embedded and automation designs than for larger 15V loads.

Can this converter be used in a machine-control panel for small 15V analog or interface circuits?

Yes, the constant-voltage 15V output is appropriate for small 15V control, interface, or analog-support circuits inside industrial equipment. Its 10W output rating means it is intended for auxiliary electronics rather than high-power panel devices.

Is the SKM10B-15 appropriate for outdoor or harsh-temperature locations?

The listed operating temperature is -40°C to +85°C, so the temperature range is broad. However, no IP rating is provided in the specs, so environmental sealing is not specified and the product page does not establish outdoor suitability by itself.

How does the SKM10B-15 compare with other SKM10B series output options?

Within the SKM10B 10W series, the sibling outputs listed are 3.3V at 2.5A for SKM10B-03, 5V at 2A for SKM10B-05, 12V at 833mA for SKM10B-12, and 15V at 666mA for SKM10B-15. All are shown as 10W models, so the main difference in the listed specs is the output voltage and output current.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8659372507456, "variants" :[{ "context":"default", "variant_id": 46635020616000, "sku":"SKM10B-15", "inventory_qty" : 1, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$22.90\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SKM10B-15 DC-DC Converter - 10W - 18~36V in 15V out 666mA
Mean Well

Mean Well SKM10B-15 DC-DC Converter - 10W - 18~36V in 15V out 666mA

$22.90 USD

SKM10B-15 is the 15V output model of this series: rated power 10W, typical efficiency 88%.

SKM10 and DKM10 series are 10W isolated and regulated module type DC-DC converter with DIP 1"x1" package. It features international standard pins, a high efficiency up to 90%, wide working temperature range -40~+85℃, 1.5KVDC I/P-O/P isolation voltage, Compliance to BS EN/EN55032 radiated Class A without additional components , continuous-mode short circuit protection, etc. The models account for different input voltage 4.7~9V, 9~18V, 18~36V and 36~75V 2:1 wide input range, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.

Features

  • DIP 1"x1" package with industry standard pinout
  • 2:1 wide input range
  • Operating temperature range -40 ~ +85℃
  • No minimum load required
  • Comply to BS EN/EN55032 radiated Class A without additional components
  • High efficiency up to 90%
  • Protections: Short circuit (Continuous) / Overload / Over voltage / Input under voltage
  • 1.5KVDC I/O isolation
  • Remote ON/OFF control and Triming output (±10%)
  • 3 years warranty

Typical applications

  • Telecom/ datacom system
  • Wireless network
  • Industrial control facility
  • Instrument
  • Analyzer
  • Detector
  • Data switch
View product