Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SKM10A-05 DC-DC Converter - 10W - 9~18V in 5V out 2A

SKU SKM10A-05
$22.90 USD
Shipping calculated at checkout.
Available to order
|

Overview

SKM10A-05 is the 5V output model of this series: rated power 10W, typical efficiency 85%.

SKM10 and DKM10 series are 10W isolated and regulated module type DC-DC converter with DIP 1"x1" package. It features international standard pins, a high efficiency up to 90%, wide working temperature range -40~+85℃, 1.5KVDC I/P-O/P isolation voltage, Compliance to BS EN/EN55032 radiated Class A without additional components , continuous-mode short circuit protection, etc. The models account for different input voltage 4.7~9V, 9~18V, 18~36V and 36~75V 2:1 wide input range, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.

Features

  • DIP 1"x1" package with industry standard pinout
  • 2:1 wide input range
  • Operating temperature range -40 ~ +85℃
  • No minimum load required
  • Comply to BS EN/EN55032 radiated Class A without additional components
  • High efficiency up to 90%
  • Protections: Short circuit (Continuous) / Overload / Over voltage / Input under voltage
  • 1.5KVDC I/O isolation
  • Remote ON/OFF control and Triming output (±10%)
  • 3 years warranty

Specifications

SKM10A-05Specifications from the official datasheet (2024-04-30 edition)

MODEL SELECTION TABLE

INPUT VOLTAGE (RANGE)
12V (9 ~ 18V)
INPUT CURRENT NO LOAD
30mA
INPUT CURRENT FULL LOAD
980mA
OUTPUT VOLTAGE
5V
OUTPUT CURRENT
2000mA
EFFICIENCY (Typ.)
85%
CAPACITOR LOAD (MAX.)* For each output
2000μF

INPUT

VOLTAGE RANGE
9~18Vdc ,
SURGE VOLTAGE (100ms max.)
5Vin models : 12Vdc, 12Vin models : 25Vdc, 24Vin models : 50Vdc, 48Vin models : 100Vdc
FILTER
Pi type
PROTECTION
Fuse recommended. 5Vin models: 5A delay time Type, 12Vin models: 4A delay time Type, 24Vin models: 2A delay time Type, 48Vin models: 1A delay time Type
INTERNAL POWER DISSIPATION
500mW

OUTPUT

VOLTAGE ACCURACY
±1.5%
RATED POWER
10W
RIPPLE & NOISENote.2
50mVp-p
LINE REGULATIONNote.3
±0.2%
LOAD REGULATIONNote.4
Single output models: ±0.2%, Dual output models:±1%
SWITCHING FREQUENCY (Typ.)
350KHz
EXTERNAL TRIM ADJ. RANGE (Typ.)
±10% (Single output model only)

PROTECTION

SHORT CIRCUIT
Protection type : Continuous, automatic recovery
OVERLOAD
110 ~ 140% rated output power Protection type : Recovers automatically after fault condition is removed
OVER VOLTAGE
Protection type : Clamp by diode
UNDER VOLTAGE LOCKOUT Start-up voltage
5Vin: 4.4Vdc, 12Vin: 8.8Vdc, 24Vin: 17Vdc, 48Vin: 34Vdc
UNDER VOLTAGE LOCKOUT Shutdown voltage
5Vin: 4.2Vdc, 12Vin: 8Vdc, 24Vin: 16Vdc, 48Vin: 32Vdc

FUNCTION

REMOTE CONTROL
Power ON: R.C. ~ -Vin >5.5~75Vdc or open circuit ; Power OFF: R.C. ~ -Vin <1.2Vdc or short

ENVIRONMENT

COOLING
Free-air convection
WORKING TEMP.
-40 ~ +85℃ (Refer to "Derating Curve")
CASE TEMPERATURE
+105℃ max.
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT
0.03% / ℃ (0 ~ 71℃)
SOLDERING TEMPERATURE
1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.5)

SAFETY STANDARDS
EAC TP TC 020/2011 (EAC TP TC 004 for 48Vin type only) approved
WITHSTAND VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.)
1000pF
EMC EMISSION
ParameterStandardTest Level
ConductedBS EN/EN55032(CISPR32)N/A
RadiatedBS EN/EN55032(CISPR32)Class A
EMC IMMUNITY
ParameterStandardTest Level
ESDBS EN/EN61000-4-2Level 2, ±8KV air, ±4KV contact
Radiated SusceptibilityBS EN/EN61000-4-3Level 2, 3V/m
EFT/BurstsBS EN/EN61000-4-4Level 1, 0.5KV
SurgeBS EN/EN61000-4-5Level 1, 0.5KV Line-Line
ConductedBS EN/EN61000-4-6Level 2, 3V(e.m.f.)
Magnetic FieldBS EN/EN61000-4-8Level 2, 3A/m

OTHERS

MTBF
1200Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H)
25.4*25.4*10.2mm (1*1*0.4 inch)
CASE MATERIAL
Black coated copper with Non-Conductive Base
PACKING
18.3g ; 12pcs/per tube, 600pcs/50 tube/per carton
Test conditions and notes5
  1. 1.All parameters are specified at normal input(E:5Vdc, A:12Vdc, B:24Vdc, C:48Vdc), rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 10% to 100% rated load.
  5. 5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

SKM10A-05 SKM10 & DKM10 series
SKM10 & DKM10 series
SKM10A-05 SKM10 & DKM10 series (2)
SKM10 & DKM10 series (2)
SKM10A-05 Plug Assignment
Plug Assignment
SKM10A-05 Packing
Packing

Typical applications

  • Telecom/ datacom system
  • Wireless network
  • Industrial control facility
  • Instrument
  • Analyzer
  • Detector
  • Data switch

Downloads

FAQ

Can I use the SKM10A-05 for 5V embedded systems or industrial control electronics?

Yes, this model delivers constant-voltage 5V output up to 2A with a 10W total power rating. It is intended for systems using the listed 9-18VDC input range and needing a regulated 5V supply.

Is the SKM10A-05 a good fit for 5V peripherals and controller boards inside automation equipment?

It can be used for 5V controller boards and peripherals when the load remains within 2A and 10W. Its 25.4 × 25.4 × 10.2 mm package is also compact for dense equipment layouts.

Can this converter power small 5V monitoring, interface, or sensor electronics?

It is suitable for smaller 5V electronics that require constant voltage and stay below the 2A output limit. That makes it more appropriate for low-power control and interface functions than for larger 5V loads.

Is the SKM10A-05 meant for indoor use only, or can it work in tougher environments?

The specified operating temperature range is -40°C to +85°C, so it is designed for a wide temperature window. No IP rating is listed in the product data, so the specs do not verify direct outdoor exposure.

How does the SKM10A-05 compare with the other SKM10A output models?

All listed SKM10A units are 10W constant-voltage converters with 9-18VDC input, 25.4 × 25.4 × 10.2 mm dimensions, 18.3g weight, and -40°C to +85°C operation. The available outputs are 3.3V at 2.5A, 5V at 2A for SKM10A-05, 12V at 833mA, and 15V at 666mA.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8659370770752, "variants" :[{ "context":"default", "variant_id": 46635013144896, "sku":"SKM10A-05", "inventory_qty" : 0, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$22.90\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SKM10A-05 DC-DC Converter - 10W - 9~18V in 5V out 2A
Mean Well

Mean Well SKM10A-05 DC-DC Converter - 10W - 9~18V in 5V out 2A

$22.90 USD

SKM10A-05 is the 5V output model of this series: rated power 10W, typical efficiency 85%.

SKM10 and DKM10 series are 10W isolated and regulated module type DC-DC converter with DIP 1"x1" package. It features international standard pins, a high efficiency up to 90%, wide working temperature range -40~+85℃, 1.5KVDC I/P-O/P isolation voltage, Compliance to BS EN/EN55032 radiated Class A without additional components , continuous-mode short circuit protection, etc. The models account for different input voltage 4.7~9V, 9~18V, 18~36V and 36~75V 2:1 wide input range, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.

Features

  • DIP 1"x1" package with industry standard pinout
  • 2:1 wide input range
  • Operating temperature range -40 ~ +85℃
  • No minimum load required
  • Comply to BS EN/EN55032 radiated Class A without additional components
  • High efficiency up to 90%
  • Protections: Short circuit (Continuous) / Overload / Over voltage / Input under voltage
  • 1.5KVDC I/O isolation
  • Remote ON/OFF control and Triming output (±10%)
  • 3 years warranty

Typical applications

  • Telecom/ datacom system
  • Wireless network
  • Industrial control facility
  • Instrument
  • Analyzer
  • Detector
  • Data switch
View product