Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SKE15C-15 DC-DC Converter - 15W - 36~72V in 15V out 1A

Name: Mean Well SKE15C-15 DC-DC Converter - 15W - 36~72V in 15V out 1A
Brand: Mean Well
SKU: SKE15C-15
Price: 22.04 USD
Availability: InStock

SKU SKE15C-15

$22.04 USD

Shipping calculated at checkout.

Available to order

Overview

SKE15C-15 is the 15V output model of this series: rated power 15W, typical efficiency 83%.

Features

Specifications

SKE15C-15Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC VOLTAGE: 15V
CURRENT RANGE: 100 ~ 1000mA
RATED POWER: 15W
RIPPLE & NOISE (max.)^Note.2: 60mVp-p
LINE REGULATION^Note.3: ±0.3%
LOAD REGULATION^Note.4: ±0.5%
VOLTAGE ACCURACY: ±2.0%
SWITCHING FREQUENCY: 150KHz min.

INPUT

VOLTAGE RANGE: 36 ~ 72VDC
EFFICIENCY (Typ.): 83%
DC CURRENT Full load: 400mA
DC CURRENT No load: 10mA
FILTER: Pi network
PROTECTION: Fuse recommended

PROTECTION (Note. 5)

OVER CURRENT: 160% ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT: All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.: -25 ~ +71℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -25 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03% / ℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:1.5KVDC
ISOLATION RESISTANCE: I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020

OTHERS

MTBF: 300Khrs min. MIL-HDBK-217F(25℃)
DIMENSION: 50.8*50.8*11.0 mm or 2"*2"*0.43" inch (L*W*H)
PACKING: 60g ; 5pcs/per tube, 200pcs/40 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.

Technical drawings

SKE15C-15 Mechanical Specification — Mechanical Specification

Downloads

Certificates2

EMC Certificate (SKE15)(EN) PDF Download

FCC Certificate (SKE15)(EN) PDF Download

Test reports1

Test Report(SKE15C-15)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the SKE15C-15 for 15V automation or instrumentation loads?

Yes, this unit provides constant-voltage 15V output up to 1A, with a total power rating of 15W. It is intended for equipment using the listed 36-72VAC input range and needing a regulated 15V rail.

Is the SKE15C-15 a fit for embedded control boards that require 15V power?

It can be used where the board or subsystem specifically calls for 15V constant voltage and the load remains within 1A or 15W. The 50.8 × 50.8 × 11.0 mm package is also relatively compact for enclosed equipment.

Can this model support smaller 15V industrial accessories instead of a larger supply?

Yes, for smaller 15V loads, the key limits are the 1A output current and 15W maximum power. That makes it more appropriate for low-power control and signal-related hardware than for heavier 15V equipment.

Should the SKE15C-15 be used only indoors, or can it handle wider conditions?

Its specified operating temperature range is -25°C to +71°C, which supports use across a broad equipment temperature range. However, no IP rating is listed, so the provided specs do not confirm suitability for direct outdoor exposure.

What is the difference between the SKE15C-15 and the other SKE15C output options?

The series shares the same 15W rating, 36-72VAC input, constant-voltage operation, 50.8 × 50.8 × 11.0 mm dimensions, 0.065 kg weight, and -25°C to +71°C temperature range. The listed output choices are 5V at 3A for SKE15C-05, 12V at 1.25A for SKE15C-12, 15V at 1A for SKE15C-15, and 24V at 625A for SKE15C-24.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":8659368444224, "variants" :[{ "context":"default", "variant_id": 46635001905472, "sku":"SKE15C-15", "inventory_qty" : 0, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$22.04\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well SKE15C-15 DC-DC Converter - 15W - 36~72V in 15V out 1A

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION (Note. 5)

ENVIRONMENT

SAFETY & EMC

OTHERS

Technical drawings

Downloads

Certificates2

Test reports1

Catalogues2

FAQ

Payment & Security

Write a review

Your cart

Mean Well SKE15C-15 DC-DC Converter - 15W - 36~72V in 15V out 1A

Features

Company Information

Services and Support

Choose options