Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
SKE15C-05 is the 5V output model of this series: rated power 15W, typical efficiency 80%.
Features
- 2:1 wide input range
- 4:1 wide input range(option)
- 1500VDC I/O isolation
- 3000VDC I/O isolation(option)
- Built-in EMI filter
- Protections: Short circuit / Overload
- Cooling by free air convection
- Six-sided shield metal case
- 100% burn-in test
- Low cost / High reliability
- Approvals: FCC / EAC / CE / UKCA
- 2 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- 5V
- CURRENT RANGE
- 300 ~ 3000mA
- RATED POWER
- 15W
- RIPPLE & NOISE (max.)Note.2
- 50mVp-p
- LINE REGULATIONNote.3
- ±0.3%
- LOAD REGULATIONNote.4
- ±0.5%
- VOLTAGE ACCURACY
- ±2.0%
- SWITCHING FREQUENCY
- 150KHz min.
INPUT
- VOLTAGE RANGE
- 36 ~ 72VDC
- EFFICIENCY (Typ.)
- 80%
- DC CURRENT Full load
- 400mA
- DC CURRENT No load
- 10mA
- FILTER
- Pi network
- PROTECTION
- Fuse recommended
PROTECTION (Note. 5)
- OVER CURRENT
- 160% ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
- SHORT CIRCUIT
- All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT
- WORKING TEMP.
- -25 ~ +71℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -25 ~ +105℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- EAC TP TC 020/2011 approved
- WITHSTAND VOLTAGE
- I/P-O/P:1.5KVDC
- ISOLATION RESISTANCE
- I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020
OTHERS
- MTBF
- 300Khrs min. MIL-HDBK-217F(25℃)
- DIMENSION
- 50.8*50.8*11.0 mm or 2"*2"*0.43" inch (L*W*H)
- PACKING
- 60g ; 5pcs/per tube, 200pcs/40 tube/per carton
Test conditions and notes5
- 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 3.Line regulation is measured from low line to high line at rated load.
- 4.Load regulation is measured from 10% to 100% rated load.
- 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
Technical drawings
Downloads
FAQ
Can I use the SKE15C-05 to power a 5V industrial controller from a 36-72VAC source?
Yes. This converter is designed for 36-72VAC input and provides a constant 5V output at up to 3A, with 15W total power. That makes it suitable for 5V control electronics, embedded boards, and similar low-voltage industrial devices within those limits.
Is the SKE15C-05 suitable for 5V communication modules or industrial embedded systems on higher-voltage AC input?
It can be a good fit when the equipment needs 5V constant-voltage power and the available source is within 36-72VAC. The 3A output capacity and 15W power rating support a range of lower-power 5V industrial electronics.
Can this model be used for compact 5V panel electronics in automation equipment?
Yes, if the panel electronics require regulated 5V output and stay within 3A and 15W. Its 50.8 × 50.8 × 11.0 mm dimensions and 0.065 kg weight also make it practical where internal space is limited.
Is the SKE15C-05 appropriate for OEM designs that need 5V DC from a 36-72VAC input range?
Yes. The main distinction of this model is its 36-72VAC input range combined with constant 5V output, so it fits OEM systems built around that AC window. It is intended for regulated 5V loads up to 3A and 15W.
What is the difference between the SKE15C-05 and the other SKE15C versions?
All SKE15C versions here are 15W converters with 36-72VAC input, the same 50.8 × 50.8 × 11.0 mm size, and the same -25°C to +71°C operating range. The output options are 5V at 3A for SKE15C-05, 12V at 1.25A for SKE15C-12, 15V at 1A for SKE15C-15, and 24V at 625A for SKE15C-24.
Can the SKE15C-05 be used in hot or cold industrial environments?
It is rated for operation from -25°C to +71°C. That supports use across a broad indoor industrial temperature range, but no IP rating is listed for exposed outdoor conditions.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.






