Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
SKE15B-15 is the 15V output model of this series: rated power 15W, typical efficiency 83%.
Features
- 2:1 wide input range
- 4:1 wide input range(option)
- 1500VDC I/O isolation
- 3000VDC I/O isolation(option)
- Built-in EMI filter
- Protections: Short circuit / Overload
- Cooling by free air convection
- Six-sided shield metal case
- 100% burn-in test
- Low cost / High reliability
- Approvals: FCC / EAC / CE / UKCA
- 2 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- 15V
- CURRENT RANGE
- 100 ~ 1000mA
- RATED POWER
- 15W
- RIPPLE & NOISE (max.)Note.2
- 60mVp-p
- LINE REGULATIONNote.3
- ±0.3%
- LOAD REGULATIONNote.4
- ±0.5%
- VOLTAGE ACCURACY
- ±2.0%
- SWITCHING FREQUENCY
- 150KHz min.
INPUT
- VOLTAGE RANGE
- 18 ~ 36VDC
- EFFICIENCY (Typ.)
- 83%
- DC CURRENT Full load
- 800mA
- DC CURRENT No load
- 20mA
- FILTER
- Pi network
- PROTECTION
- Fuse recommended
PROTECTION (Note. 5)
- OVER CURRENT
- 160% ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
- SHORT CIRCUIT
- All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT
- WORKING TEMP.
- -25 ~ +71℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -25 ~ +105℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- EAC TP TC 020/2011 approved
- WITHSTAND VOLTAGE
- I/P-O/P:1.5KVDC
- ISOLATION RESISTANCE
- I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020
OTHERS
- MTBF
- 300Khrs min. MIL-HDBK-217F(25℃)
- DIMENSION
- 50.8*50.8*11.0 mm or 2"*2"*0.43" inch (L*W*H)
- PACKING
- 60g ; 5pcs/per tube, 200pcs/40 tube/per carton
Test conditions and notes5
- 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 3.Line regulation is measured from low line to high line at rated load.
- 4.Load regulation is measured from 10% to 100% rated load.
- 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
Technical drawings
Downloads
FAQ
Can I use the SKE15B-15 for 15V analog or instrumentation circuits in industrial equipment?
Yes. This model provides a constant 15V output at up to 1A with 15W total power, and it accepts 18-36VAC input. That makes it suitable for 15V instrumentation, signal-conditioning, or analog support circuits that need regulated voltage within those limits.
Is the SKE15B-15 suitable for 15V control boards or embedded electronics in OEM systems?
It can be a fit for 15V control boards and embedded electronics when the load stays within 1A and 15W. The constant-voltage output is intended for electronics designed around a regulated 15V rail.
Can this converter be used for industrial test or measurement modules that require 15V DC?
Yes, if the module is designed for 15V constant-voltage input and does not exceed 1A or 15W. Its 18-36VAC input range can also align with equipment that already distributes that AC range internally.
Does the SKE15B-15 make sense for space-constrained control enclosures?
It is a compact option at 50.8 × 50.8 × 11.0 mm and 0.065 kg. That size can be useful in dense industrial assemblies where a regulated 15V supply is needed without taking much board or enclosure space.
What are the output differences across the SKE15B series?
All of these versions are 15W units with 18-36VAC input, the same physical size, and the same -25°C to +71°C operating range. The outputs differ by model: 5V at 3A, 12V at 1.25A, 15V at 1A, and 24V at 625A.
Can the SKE15B-15 operate in demanding indoor temperature conditions?
It is rated for operation from -25°C to +71°C. That supports use in a wide range of indoor industrial environments as long as the installation stays within that published temperature window.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.






