Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SKE15A-12 DC-DC Converter - 15W - 9~18V in 12V out 1.25A

Name: Mean Well SKE15A-12 DC-DC Converter - 15W - 9~18V in 12V out 1.25A
Brand: Mean Well
SKU: SKE15A-12
Price: 22.04 USD
Availability: InStock

SKU SKE15A-12

$22.04 USD

Shipping calculated at checkout.

In stock

Overview

SKE15A-12 is the 12V output model of this series: rated power 15W, typical efficiency 80%.

Features

Specifications

SKE15A-12Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC VOLTAGE: 12V
CURRENT RANGE: 125 ~ 1250mA
RATED POWER: 15W
RIPPLE & NOISE (max.)^Note.2: 60mVp-p
LINE REGULATION^Note.3: ±0.3%
LOAD REGULATION^Note.4: ±0.5%
VOLTAGE ACCURACY: ±2.0%
SWITCHING FREQUENCY: 150KHz min.

INPUT

VOLTAGE RANGE: 9 ~ 18VDC
EFFICIENCY (Typ.): 80%
DC CURRENT Full load: 1700mA
DC CURRENT No load: 40mA
FILTER: Pi network
PROTECTION: Fuse recommended

PROTECTION (Note. 5)

OVER CURRENT: 160% ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT: All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.: -25 ~ +71℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -25 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03% / ℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:1.5KVDC
ISOLATION RESISTANCE: I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020

OTHERS

MTBF: 300Khrs min. MIL-HDBK-217F(25℃)
DIMENSION: 50.8*50.8*11.0 mm or 2"*2"*0.43" inch (L*W*H)
PACKING: 60g ; 5pcs/per tube, 200pcs/40 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.

Technical drawings

SKE15A-12 Mechanical Specification — Mechanical Specification

Downloads

Certificates2

EMC Certificate (SKE15)(EN) PDF Download

FCC Certificate (SKE15)(EN) PDF Download

Test reports1

Test Report(SKE15A)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the SKE15A-12 to power 12V industrial sensors or relays from a 9~18V source?

Yes, this converter is built for a 9~18V input and provides a 12V constant-voltage output. Its 15W capacity and 1.25A output current make it more appropriate for lighter 12V control loads than for higher-draw 12V devices.

Is the SKE15A-12 suitable for embedded control electronics that need a regulated 12V rail?

It can be used where the system source is within 9~18V and the downstream electronics need 12V constant voltage. The 15W rating suits auxiliary 12V rails in embedded and automation equipment rather than large 12V subsystems.

Can this model support small 12V instrumentation inside a compact machine or panel?

It is a practical choice for compact equipment that needs 12V output from a 9~18V input range. With dimensions of 50.8 × 50.8 × 11.0 mm and a weight of 0.065 kg, it fits applications where space and low-power conversion matter.

How does the SKE15A-12 differ from the other SKE15A converters?

Each SKE15A model uses the same 9~18V input range and 15W power class, but the output options are different. SKE15A-05 gives 5V at 3A, SKE15A-12 gives 12V at 1.25A, SKE15A-15 gives 15V at 1A, and SKE15A-24 gives 24V at 625A.

Is the SKE15A-12 appropriate for cold or warm operating conditions?

The published operating temperature range is -25°C to +71°C, so it is specified for both low and elevated ambient conditions. No IP rating is listed, so environmental protection should come from the host enclosure if the installation is exposed to dust or weather.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":8659363037504, "variants" :[{ "context":"default", "variant_id": 46634973593920, "sku":"SKE15A-12", "inventory_qty" : 5, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$22.04\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well SKE15A-12 DC-DC Converter - 15W - 9~18V in 12V out 1.25A

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION (Note. 5)

ENVIRONMENT

SAFETY & EMC

OTHERS

Technical drawings

Downloads

Certificates2

Test reports1

Catalogues2

FAQ

Payment & Security

Write a review

Your cart

Mean Well SKE15A-12 DC-DC Converter - 15W - 9~18V in 12V out 1.25A

Features

Company Information

Services and Support

Choose options