☎ (888) 228 9138

Over 15 years experience of providing support of MEAN WELL Power Supplies

1 5

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well SKE10C-24 DC-DC Converter - 10W - 36~72V in 24V out 420mA

SKU SKE10C-24
$21.34 USD
Shipping calculated at checkout.
In stock
|

Overview

SKE10C-24 is the 24V output model of this series: rated power 10W, typical efficiency 83%.

Features

  • 2:1 wide input range
  • 4:1 wide input range(option)
  • 1500VDC I/O isolation
  • 3000VDC I/O isolation(option)
  • Built-in EMI filter
  • Protections: Short circuit / Overload
  • Cooling by free air convection
  • Six-sided shield metal case
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty

Specifications

SKE10C-24Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC VOLTAGE
24V
CURRENT RANGE
42 ~ 420mA
RATED POWER
10W
RIPPLE & NOISE (max.)Note.2
80mVp-p
LINE REGULATIONNote.3
±0.3%
LOAD REGULATIONNote.4
±0.5%
VOLTAGE ACCURACY
±2.0%
SWITCHING FREQUENCY
200KHz min.

INPUT

VOLTAGE RANGE
36 ~ 72VDC
EFFICIENCY (Typ.)
83%
DC CURRENT Full load
270mA
DC CURRENT No load
8mA
FILTER
Pi network
PROTECTION
Fuse recommended

PROTECTION (Note. 5)

OVER CURRENT
160% ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT
All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.
-25 ~ +71℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-25 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020

OTHERS

MTBF
500Khrs min. MIL-HDBK-217F(25℃)
DIMENSION
50.8*25.4*11.2mm or 2"*1"*0.44" inch (L*W*H)
PACKING
31.2g ; 10pcs/per tube, 400pcs/40 tube/per carton
Test conditions and notes5
  1. 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 10% to 100% rated load.
  5. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.

Technical drawings

SKE10C-24 Mechanical Specification
Mechanical Specification
SKE10C-24 Packing
Packing

Downloads

FAQ

Can I use the SKE10C-24 to power a 24V industrial sensor or transmitter from a 36~72V bus?

Yes, this model is designed for systems with a 36~72V input and a 24V constant-voltage output. Its 10W rating makes it a fit for lower-power 24V industrial electronics rather than larger 24V loads.

Is the SKE10C-24 suitable for embedded control boards that need isolated 24V auxiliary power?

It can be used where the equipment needs a regulated 24V output from a 36~72V input range. With a compact 50.8 × 25.4 × 11.2 mm body and 10W power level, it is better suited to compact embedded or control assemblies than high-demand subsystems.

Can this converter be used in telecom or automation equipment that runs on higher-voltage DC sources?

It is intended for applications that have a 36~72V input available and need a steady 24V output. The 10W capacity aligns better with auxiliary rails, monitoring devices, and small automation electronics than with larger 24V equipment.

How does the SKE10C-24 compare with other SKE10C models?

All SKE10C models in this group are rated at 10W, but they provide different outputs: SKE10C-05 is 5V at 2A, SKE10C-12 is 12V at 840mA, SKE10C-15 is 15V at 666mA, and SKE10C-24 is 24V at 420mA. The main difference is the output voltage and corresponding output current for the same 10W class.

Is the SKE10C-24 suitable for outdoor or harsh-environment use?

The listed operating temperature is -25°C to +71°C, so the temperature range covers both cold and hot operating conditions. No IP rating is listed in the provided specifications, so this product should be treated as a converter for protected enclosures rather than exposed outdoor mounting.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8659362677056, "variants" :[{ "context":"default", "variant_id": 46634970906944, "sku":"SKE10C-24", "inventory_qty" : 19, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$21.34\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SKE10C-24 DC-DC Converter - 10W - 36~72V in 24V out 420mA
Mean Well

Mean Well SKE10C-24 DC-DC Converter - 10W - 36~72V in 24V out 420mA

$21.34 USD

SKE10C-24 is the 24V output model of this series: rated power 10W, typical efficiency 83%.

Features

  • 2:1 wide input range
  • 4:1 wide input range(option)
  • 1500VDC I/O isolation
  • 3000VDC I/O isolation(option)
  • Built-in EMI filter
  • Protections: Short circuit / Overload
  • Cooling by free air convection
  • Six-sided shield metal case
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty
View product

  • Call us

    (888) 228 9138

  • Email us

    contact@wellforces.com

  • Business Hours

    Mon-Fri
    EST 9:00am-5:30pm

  • Wholesale and Trade Account

    Let's grow together
Back to top