Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SKE10C-05 DC-DC Converter - 10W - 36~72V in 5V out 2A

Name: Mean Well SKE10C-05 DC-DC Converter - 10W - 36~72V in 5V out 2A
Brand: Mean Well
SKU: SKE10C-05
Price: 21.34 USD
Availability: InStock

SKU SKE10C-05

$21.34 USD

Shipping calculated at checkout.

Available to order

Overview

SKE10C-05 is the 5V output model of this series: rated power 10W, typical efficiency 80%.

Features

Specifications

SKE10C-05Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC VOLTAGE: 5V
CURRENT RANGE: 200 ~ 2000mA
RATED POWER: 10W
RIPPLE & NOISE (max.)^Note.2: 50mVp-p
LINE REGULATION^Note.3: ±0.3%
LOAD REGULATION^Note.4: ±0.5%
VOLTAGE ACCURACY: ±2.0%
SWITCHING FREQUENCY: 200KHz min.

INPUT

VOLTAGE RANGE: 36 ~ 72VDC
EFFICIENCY (Typ.): 80%
DC CURRENT Full load: 270mA
DC CURRENT No load: 8mA
FILTER: Pi network
PROTECTION: Fuse recommended

PROTECTION (Note. 5)

OVER CURRENT: 160% ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT: All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.: -25 ~ +71℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -25 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03% / ℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:1.5KVDC
ISOLATION RESISTANCE: I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020

OTHERS

MTBF: 500Khrs min. MIL-HDBK-217F(25℃)
DIMENSION: 50.8*25.4*11.2mm or 2"*1"*0.44" inch (L*W*H)
PACKING: 31.2g ; 10pcs/per tube, 400pcs/40 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.

Technical drawings

SKE10C-05 Mechanical Specification — Mechanical Specification

Downloads

Certificates1

FCC Certificate (SKE10)(EN) PDF Download

Test reports1

Test Report(SKE10C-05)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the SKE10C-05 to power 5V embedded controllers or logic boards?

Yes, it provides a constant 5V output with a 10W rating. It is suited to embedded controllers or logic boards that require 5V and fit within the listed 2A output and 10W power limit.

Is the SKE10C-05 suitable for industrial communication or monitoring electronics that run on 5V?

Yes, this converter is intended for a 36-72VDC input range and delivers constant-voltage 5V output. It is appropriate for monitoring or communication electronics that operate on 5V and stay within 2A.

Can this converter be used for low-power automation devices that need 5V from a higher input range?

It can be used where a low-power automation device needs constant 5V and the available input is within 36-72VDC. The stated limits are 10W total power and 2A output current.

Is the SKE10C-05 rated for outdoor exposure or washdown areas?

The listed operating temperature range is -25°C to +71°C, but no IP rating is included in the provided specs. Because of that, temperature performance is specified while outdoor or washdown protection is not.

How does the SKE10C-05 compare with the other SKE10C output options?

All listed SKE10C siblings are 10W converters with the same series format. The outputs are 5V at 2A for SKE10C-05, 12V at 840mA for SKE10C-12, 15V at 666mA for SKE10C-15, and 24V at 420mA for SKE10C-24.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":8659361628480, "variants" :[{ "context":"default", "variant_id": 46634967368000, "sku":"SKE10C-05", "inventory_qty" : 0, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$21.34\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well SKE10C-05 DC-DC Converter - 10W - 36~72V in 5V out 2A

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION (Note. 5)

ENVIRONMENT

SAFETY & EMC

OTHERS

Technical drawings

Downloads

Certificates1

Test reports1

Catalogues2

FAQ

Payment & Security

Write a review

Your cart

Mean Well SKE10C-05 DC-DC Converter - 10W - 36~72V in 5V out 2A

Features

Company Information

Services and Support

Choose options