Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
SKA20B-05 is the 5V output model of this series: rated power 20W, typical efficiency 88%.
Features
- 2"×1" compact size
- 2:1 wide input range
- High efficiency up to 89.5%
- 1500VDC I/O isolation
- Built-in remote ON/OFF control
- Built-in trimming output
- Built-in EMI filter
- Protections: Short circuit / Overload / Input and Output Over voltage
- Cooling by free air convection
- Six-sided shielded metal case
- 100% burn-in test
- Low cost / High reliability
- Approvals: FCC / EAC / CE / UKCA
- 2 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- 5V
- CURRENT RANGE
- 400 ~ 4000mA
- RATED POWER
- 20W
- RIPPLE & NOISE (max.)Note.2
- 50mVp-p
- LINE REGULATIONNote.3
- ±0.2%
- LOAD REGULATIONNote.4
- ±0.5%
- VOLTAGE ACCURACY
- ±2.0%
- SWITCHING FREQUENCY
- 300KHz typ.
- EXTERNAL CAPACITANCE LOAD (max.)
- 1000uF
- EXTERNAL TRIM Adj. RANGE(Typ.)
- ±10%
INPUT
- VOLTAGE RANGE
- 18 ~ 36VDC
- EFFICIENCY (Typ.)
- 88%
- DC CURRENT Full load
- 970mA
- DC CURRENT No load
- 55mA
- FILTER
- Pi network
- REMOTE CONTROL
- Power ON : R.C ~ -Vin > 2.5V ~ 30VDC or open circuit ; Power OFF : R.C ~ -Vin < 0.5VDC or short
PROTECTION (Note. 5)
- PROTECTION
- Fuse recommended
- OVER CURRENT
- 110% ~ 180% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
- SHORT CIRCUIT
- All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE
- >40 ~ 43VDC
ENVIRONMENT
- WORKING TEMP.
- -40 ~ +85℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -55 ~ +125℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- EAC TP TC 020/2011 (EAC TP TC 004 for 48Vin type only) approved
- WITHSTAND VOLTAGE
- I/P-O/P:1.5KVDC
- ISOLATION RESISTANCE
- I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55032 Class A, FCC part 15 Class A, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A, EAC TP TC 020
OTHERS
- MTBF
- 700Khrs min. MIL-HDBK-217F(25℃)
- DIMENSION
- 50.8*25.4*11.2 mm or 2"*1"*0.44" inch (L*W*H)
- PACKING
- 31.2g ; 10pcs/per tube, 400pcs/40 tube/per carton
Test conditions and notes5
- 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 3.Line regulation is measured from low line to high line at rated load.
- 4.Load regulation is measured from 10% to 100% rated load.
- 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
Technical drawings
Downloads
FAQ
Can I use the SKA20B-05 to power a 5V industrial controller or embedded board from an 18-36VDC source?
Yes, this model is designed for a 5V constant-voltage output and accepts 18-36VDC input. It can support 5V loads up to 4A, with a 20W maximum output.
Is the SKA20B-05 suitable for 5V automation sensors or interface modules in a control cabinet?
It can be a fit for 5V automation devices that need regulated constant-voltage power and stay within 4A output current. The 20W rating and 18-36VDC input range make it relevant where that input window is available.
Can this converter be used for 5V embedded or industrial communication hardware?
It is intended for applications that need a fixed 5V output from an 18-36VDC input source. As long as the equipment requires no more than 4A at 5V, this converter matches that electrical profile.
Is the SKA20B-05 rated for outdoor or harsh-temperature use?
The listed operating temperature range is -40°C to +85°C, which supports use across a wide temperature span. No IP rating is provided in the specs, so the product data does not identify it as outdoor- or weather-exposed rated.
How does the SKA20B-05 compare with the other SKA20B models?
Within the SKA20B series, all three models are 20W units with the same 18-36VDC input range, 50.8 × 25.4 × 11.2 mm dimensions, 0.0312 kg weight, and -40°C to +85°C operating range. The difference is output: SKA20B-05 is 5V at 4A, SKA20B-12 is 12V at 1.66A, and SKA20B-15 is 15V at 1.33A.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.






