Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
SFTN01L-05 is the 5V output model of this series: rated power 1W, typical efficiency 80%.
SFTN01 series is 1W isolated and unregulated module type DC-DC converter with SMD package. It features international standard pins, a high efficiency up to 82%, wide working temperature range -40~+90℃, 3KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class B without additional components, short circuit protection, etc. The models account for different input voltage 5V/12V/24V±10%, and various output voltage, 5V/9V/12V/15V for single output which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.
Features
- SMD package with industry standard pinout
- Operating temperature range -40 ~ +90℃
- Comply to BS EN/EN55032 radiated Class B without additional components
- High efficiency up to 82%
- Protection: Short circuit
- 3KVDC I/O isolation
- Low cost
- Optional reel packing
- 3 years warranty
Specifications
INPUT
- INPUT VOLTAGE (RANGE)
- Normal 5V (4.5 ~ 5.5V)
- INPUT CURRENT NO LOAD
- 30mA
- INPUT CURRENT FULL LOAD
- 260mA
- VOLTAGE RANGE
- 4.5 ~ 5.5Vdc
- SURGE VOLTAGE (100ms max.)
- 5Vin models : 9Vdc 12Vin models : 16Vdc 24Vin models : 30Vdc
- FILTER
- Internal capacitor
- PROTECTION
- Fuse recommended. 5Vin models: 750mA Slow-Blow Type 12Vin models: 300mA Slow-Blow Type 24Vin models: 150mA Slow-Blow Type
- INTERNAL POWER DISSIPATION
- 500mW
OUTPUT
- OUTPUT VOLTAGE
- 5V
- OUTPUT CURRENT
- 20 ~ 200mA
- EFFICIENCY (TYP.)
- 80%
- CAPACITOR LOAD (MAX.)
- 220μF
- VOLTAGE ACCURACY
- ±2.0%
- RATED POWER
- 1W
- RIPPLE & NOISENote.2
- 75mVp-p
- LINE REGULATIONNote.3
- 1.2% for 1% input variation
- LOAD REGULATIONNote.4
- ±8%
- SWITCHING FREQUENCY (Typ.)
- 100KHz
PROTECTION
- SHORT CIRCUIT
- Standard model: 0.5 second max. Optional models (SC-suffix): Continuous
ENVIRONMENT
- COOLING
- Free-air convection
- WORKING TEMP.
- Standard model: -40 ~ +90℃ (Refer to "Derating Curve") ; Optional models (SC-suffix): -40 ~ +105℃
- CASE TEMPERATURE
- +100℃ max.
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -55 ~ +125℃, 10 ~ 95% RH non-condensing
- TEMP. COEFFICIENT
- 0.03% / ℃ (0 ~ 85℃)
- SOLDERING TEMPERATURE
- 1.5mm from case of 1 ~ 10sec./240℃ max.
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC ( Note.5,6)
- SAFETY STANDARDS
- UL62368-1(Except for 9V output models), EAC TP TC 020/2011 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVDC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- ISOLATION CAPACITANCE (Typ.)
- 80pF
- EMC EMISSION
-
Parameter Standard Test Level Conducted BS EN/EN55032(CISPR32) N/A Radiated BS EN/EN55032(CISPR32) Class B - EMC IMMUNITY
-
Parameter Standard Test Level ESD BS EN/EN61000-4-2 Level 3, ±8KV air Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m EFT/Burest BS EN/EN61000-4-4 Level 1, 0.5KV Surge BS EN/EN61000-4-5 Level 2, 0.5KV Line-Line Conducted BS EN/EN61000-4-6 Level 2, 3V Magnetic Field BS EN/EN61000-4-8 Level 1, 1A/m
OTHERS
- MTBF
- 880Khrs min. MIL-HDBK-217F(25℃)
- DIMENSION (L*W*H)
- 15.24*10.9*7.1mm (0.6*0.43*0.28 inch)
- CASE MATERIAL
- Non-Conductive black plastic (UL 94V-0 rated)
- PACKING
- Standard : 1.2g ; 32 pcs/per tube, 3840 pcs/ 120 tube/per carton Optional : 1.2g ; 500 pcs/per reel , 2500 pcs/ 5 reel /per carton
Test conditions and notes6
- 1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
- 3.Line regulation is measured from low line to high line at rated load.
- 4.Load regulation is measured from 10% to 100% rated load.
- 5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)
- 6.An external input filter capacitor is required if the module has to meet BS EN/EN61000-4-4, BS EN/EN61000-4-5. The filter capacitor Power Mate suggest: 470μF/100V.
Technical drawings
Typical applications
- Telecom/datacom system
- Wireless network
- Industrial control facility
- Instrument
- Analyzer
- Detector
- Data switch
Downloads
Certificates5
Test reports1
FAQ
Can I use the SFTN01L-05 for a small 5V embedded control circuit?
Yes, this model is sized for low-power 5V applications because it is rated at 1W. Its compact 15.24 × 10.9 × 7.1 mm package also makes it easier to place in dense embedded designs.
Is the SFTN01L-05 appropriate for powering a sensor or interface board that needs 5V DC?
It can be a fit for low-power 5V sensor, interface, or logic sections when the total requirement stays within 1W. This is a small-format DC-DC converter, so it is better suited to board-level electronics than larger industrial loads.
Would this converter work in compact industrial or automation electronics?
Yes, for low-power 5V sections inside automation or embedded equipment, especially where board space is limited to a 15.24 × 10.9 × 7.1 mm footprint. The operating temperature range of -40°C to +90°C also supports demanding electronics environments.
Can the SFTN01L-05 be used in portable or space-constrained embedded devices?
It is well aligned with compact designs because it weighs 0.0012 kg and delivers 1W in a very small package. That combination is more relevant to tightly packed embedded assemblies than to higher-power external power systems.
How does the SFTN01L-05 compare with the other SFTN01L models?
The listed siblings are SFTN01L-05 at 1W, 5V, 200mA, SFTN01L-09 at 1W, 9V, 111mA, SFTN01L-12 at 1W, 12V, 84mA, and SFTN01L-15 at 1W, 15V, 67mA. Across this group, the rated power stays at 1W while the output voltage changes by model.
Is the SFTN01L-05 suitable for outdoor or high-temperature electronics?
The specified operating temperature is -40°C to +90°C, with load derating at the upper end per the derating curve. No IP rating is provided, so the specs do not identify it as an outdoor or weather-exposed converter.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.




