☎ (888) 228 9138

Over 15 years experience of providing support of MEAN WELL Power Supplies

1 5

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well SDM30-48S5 DC-DC Converter - 25W - 36~72V in 5V out 5A

SKU SDM30-48S5
$30.30 USD
Shipping calculated at checkout.
In stock
|

Overview

SDM30-48S5 is the 5V output model of this series: rated current 5A, rated power 25W, typical efficiency 80%.

Features

  • Wide 2:1 DC input range
  • In/out capacitance1000pF
  • Protections: Short circuit / Overload / Over voltage
  • 1000VDC I/O isolation for D/D
  • Cooling by free air convection
  • Built-in remote ON-OFF control
  • 100% full load burn-in test
  • Fixed switching frequency at 225KHz
  • Low cost
  • High reliability
  • 2 years warranty

Specifications

SDM30-48S5Specifications from the official datasheet (2024-11-22 edition)

OUTPUT

DC VOLTAGE
5V
RATED CURRENT
5A
CURRENT RANGE
0 ~ 5A
RATED POWER
25W
RIPPLE & NOISE (max.)Note.2
75mVp-p
VOLTAGE TOLERANCENote.3
±2.0% max.
LINE REGULATION
±1.0%
LOAD REGULATION
±1.0%
TRIM OUTPUT
±13%(Typ.) output voltage

INPUT

RATED DC INPUT
12S: 12VDC 24S: 24VDC 48S: 48VDC
VOLTAGE RANGE
12S: 9.2 ~ 18VDC 24S: 18~ 36VDC 48S: 36~ 72VDC
EFFICIENCY (Typ.)
80%
DC CURRENT
12S:3.6A 24S:2A 48S:1A
IDLE CURRENT
12S:35mA 24S/48S:30mA

PROTECTION

OVERLOAD
Above 105% rated output power Protection type : Over power limiting, recovers automatically after fault condition is removed
OVER VOLTAGE
5.75 ~ 7.5V Protection type : Shut off o/p voltage, clamping by zener diode
SHORT CIRCUIT
Protection type : Constant current limiting, recovers automatically after fault condition is removed

FUNCTION

ON/OFF CONTROL
Logic "1" or open: power on Logic "0" short to Vin-: power off

ENVIRONMENT

WORKING TEMP.
-25 ~ +85℃ (Refer to "Derating Curve")
STORAGE TEMP., HUMIDITY
-25 ~ +85℃, 0 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0~50℃)

SAFETY & EMC (Note 6)

SAFETY STANDARDS
Design refer to LVD, EAC TP TC 004 approved
ISOLATION VOLTAGE
I/P-O/P:1KVDC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃ / 70% RH
EMC EMISSION
Compliance to BS EN/EN55032 (CISPR32) Class B, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-2,3,4,6,8, BS EN/EN55035, light industry level, EAC TP TC 020

OTHERS

MTBF
8083.5K hrs min. Telcordia SR-332 (Bellcore) ; 777.2K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
50.8*50.8*16mm (2"*2"*0.63") (L*W*H)
PACKING
0.1Kg; 150pcs/15.8Kg/0.94CUFT
Test conditions and notes7
  1. 1. All parameters NOT specially mentioned are measured at 12,24,48VDC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. Short circuit not more than 60 second.
  5. 5. DC source wires ≧5cm, an input external al capacitor 47 ~ 100uF is required.
  6. 6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 230mm*230mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
  7. 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

Technical drawings

SDM30-48S5 Block Diagram
Block Diagram
SDM30-48S5 Derating Curve
Derating Curve

Downloads

FAQ

Can I use the SDM30-48S5 to power 5V embedded systems from a 36~72V source?

Yes, this converter accepts 36~72V input and provides a constant 5V output. With 25W available and up to 5A output current, it fits 5V embedded systems that need more current than a small logic rail. Its 50.8 × 50.8 × 16.0 mm size also makes it practical for compact assemblies.

Is the SDM30-48S5 suitable for industrial USB-class 5V electronics or control peripherals?

It is suitable for 5V electronics when the source is within 36~72V and the total load stays within 25W and 5A. That output level is relevant for control peripherals, communication devices, and embedded boards that are designed around a regulated 5V rail. The constant-voltage output is important for electronics that expect stable 5V input.

Can this model power 5V sensor hubs or single-board computing hardware in automation cabinets?

Yes, that is a reasonable application if the cabinet has a 36~72V supply available. The converter delivers 5V at up to 5A, which is useful for higher-current low-voltage electronics in industrial or automation environments. Buyers should confirm the downstream load remains within the 25W maximum.

How does the SDM30-48S5 compare with the other 36~72V input SDM30 converters?

Among the 36~72V input models, the SDM30-48S3 is 16.5W at 3.3V and 5A, this SDM30-48S5 is 25W at 5V and 5A, the SDM30-48S12 is 30W at 12V and 2.5A, and the SDM30-48S15 is 30W at 15V and 2A. The full family also includes 12V-input versions at 16.5W, 25W, 25.2W, and 25.5W, plus 24V-input versions at 16.5W, 25W, 30W, and 30W. The choice depends on the upstream input range and the exact output voltage and current your load requires.

Is the SDM30-48S5 appropriate for outdoor use or only inside protected equipment?

The operating temperature range is listed as -25°C to +85°C, with the load derated at higher ambient temperatures per the derating curve, so the unit is specified for broad temperature conditions. The provided specs do not show an IP rating, which means there is no stated ingress-protection level for water or dust exposure. In practice, that points to use inside protected housings rather than exposed outdoor mounting.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8659345867072, "variants" :[{ "context":"default", "variant_id": 46634870079808, "sku":"SDM30-48S5", "inventory_qty" : 1, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$30.30\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SDM30-48S5 DC-DC Converter - 25W - 36~72V in 5V out 5A
Mean Well

Mean Well SDM30-48S5 DC-DC Converter - 25W - 36~72V in 5V out 5A

$30.30 USD

SDM30-48S5 is the 5V output model of this series: rated current 5A, rated power 25W, typical efficiency 80%.

Features

  • Wide 2:1 DC input range
  • In/out capacitance1000pF
  • Protections: Short circuit / Overload / Over voltage
  • 1000VDC I/O isolation for D/D
  • Cooling by free air convection
  • Built-in remote ON-OFF control
  • 100% full load burn-in test
  • Fixed switching frequency at 225KHz
  • Low cost
  • High reliability
  • 2 years warranty
View product

  • Call us

    (888) 228 9138

  • Email us

    contact@wellforces.com

  • Business Hours

    Mon-Fri
    EST 9:00am-5:30pm

  • Wholesale and Trade Account

    Let's grow together
Back to top