Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well NPP-750-12 722.4W 12V Battery Charge& Power Supply 2-in-1, Selectable via Jumper 43A

Name: Mean Well NPP-750-12 722.4W 12V Battery Charge& Power Supply 2-in-1, Selectable via Jumper 43A
Brand: Mean Well
SKU: NPP-750-12
Price: 174.99 USD
Availability: InStock

can switch between charger and power supply3 stage chargingonly suitable for lead-acid batteriescharging voltage/current adjustable through panel

SKU NPP-750-12

$174.99 USD

Shipping calculated at checkout.

Available to order

Overview

NPP-750-12 is the 14.4V output model of this series: rated current 43A, rated power 722.4W, typical efficiency 92%.

NPP-750 is a miniaturized dual-purpose charger and power supply. In addition to being used as a three-stage charger for lead-acid batteries, it can also be used as a constant voltage output power supply to drive general load. The operating mode can be quickly switched by plugging or unplugging a connector on the front panel. Other features include: ultra-wide voltage output, adjustable voltage via VR on the panel (10.5~21V, 21~42V, 42~80V), adjustable charging current (50~100%), built-in intelligent fan with variable speed based on temperature to reduce noise and extend fan lifetime, -30~+70°C wide operating temperature, suitability for use in different environments, built-in remote ON/OFF control, compliance to IEC/EN/UL62368-1 and household EN60335-1/-2-29 dual safety, multiple built-in protections, and 3-year warranty. The NPP-750 is truly an intelligent, safe, and reliable universal dual-purpose charger and power supply with outstanding cost performance.

Features

Multi-function single unit battery charger or power supply operation modes selectable
Output voltage and current adjustable via potentiometer
3-stage charging curve for charging mode
-30~+70℃ wide operating temperature
Multiple protections: Short circuit / Over load / Over voltage / Over temperature
Thermal controlled DC fan for noise reduction
Remote ON-OFF control
Comply with 62368-1+60335-1/-2-29 dual certification
Suitable for lead-acid (Pb) batteries
Carry handle accessory available (Order NO.:Carry handle, sold separately)
3 years warranty

Specifications

NPP-750-12Specifications from the official datasheet (2026-07-06 edition)

OUTPUT (Battery Charger mode, default)

BOOST CHARGE VOLTAGE(Vboost)(default): 14.4V
FLOAT CHARGE VOLTAGE(Vfloat)(default): 13.8V
VOLTAGE ADJUSTABLE RANGE: 10.5 ~ 21V
VOLTAGE ADJUSTABLE RANGE: By built-in potentionmeter
MAX. OUTPUT CURRENT(CC): 43A
CURRENT ADJUSTABLE RANGE: 21.5 ~ 43A
CURRENT ADJUSTABLE RANGE^Note.3: By built-in potentionmeter
MAX. POWER: 722.4W
RECOMMENDED BATTERY CAPACITY (AMP HOURS)^Note.4: 150 ~ 500AH

INPUT (Battery Charger mode, default)

VOLTAGE RANGE^Note.5: 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.98/115VAC, PF>0.95/230VAC at full load
EFFICIENCY (Typ.)^Note.6: 92%
AC CURRENT (Typ.): 8.7A/115VAC 4A/230VAC
INRUSH CURRENT (Typ.): COLD START 50A at 230VAC

PROTECTION (Battery Charger mode, default)

SHORT CIRCUIT^Note.7: Protection type : Constant current limiting, charger will shutdown after 5 sec, re-power on to recover
OVER VOLTAGE: 21.5 ~ 26V Protection type : Shut down and latch off o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down O/P voltage, recovers automatically after temperature goes down

FUNCTION (Battery Charger mode, default)

CHARGING STAGE: 3 stage only
CHARGER OK SIGNAL: The TTL signal out, Charger OK = H(4.5 ~ 5.5V) ; Charger failure or protection status =L( -0.5 ~ +0.5V)
BATTERY FULL SIGNAL: The TTL signal out, Battery full = H(4.5 ~ 5.5V ); Charging = L(-0.5 ~ +0.5V)
REMOTE CONTROL: Open : Charger stop charging Short : Charger normal work
FAN ON/OFF CONTROL: Depends on internal temperature

ENVIRONMENT (Battery Charger mode, default)

WORKING TEMP.: -30 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: ±0.05%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC (Battery Charger mode, default)

SAFETY STANDARDS: CB IEC62368-1,IEC60335-1/2-29, Dekra BS EN/EN62368-1,BS EN/EN60335-1/2-29, UL62368-1, J62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE: I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION^{Note 8}: Parameter Standard Test Level

Conducted BS EN/EN55032 (CISPR32),BS EN/EN55014-1 Class B
Radiated BS EN/EN55032 (CISPR32),BS EN/EN55014-1 Class B
Harmonic Current BS EN/EN61000-3-2 Class A
Voltage Flicker BS EN/EN61000-3-3
EMC IMMUNITY^{Note 8}: J55032(H29)

Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact
Radiated BS EN/EN61000-4-3 Level 2, 3V/m
EFT / Burst BS EN/EN61000-4-4 Level 2, 1KV
Surge BS EN/EN61000-4-5 Level 2, 1KV/Line-Line,Level 3, 2KV/Line-Earth
Conducted BS EN/EN61000-4-6 Level 2, 3Vrms
Magnetic Field BS EN/EN61000-4-8 Level 1, 1A/m
Voltage Dips and Interruptions BS EN/EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

Parameter	Standard	Test Level
Conducted	BS EN/EN55032 (CISPR32),BS EN/EN55014-1	Class B
Radiated	BS EN/EN55032 (CISPR32),BS EN/EN55014-1	Class B
Harmonic Current	BS EN/EN61000-3-2	Class A
Voltage Flicker	BS EN/EN61000-3-3

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, 8KV air; Level 2, 4KV contact
Radiated	BS EN/EN61000-4-3	Level 2, 3V/m
EFT / Burst	BS EN/EN61000-4-4	Level 2, 1KV
Surge	BS EN/EN61000-4-5	Level 2, 1KV/Line-Line,Level 3, 2KV/Line-Earth
Conducted	BS EN/EN61000-4-6	Level 2, 3Vrms
Magnetic Field	BS EN/EN61000-4-8	Level 1, 1A/m
Voltage Dips and Interruptions	BS EN/EN61000-4-11	>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

OTHERS (Battery Charger mode, default)

MTBF: 883.5K hrs min. Telcordia SR-332 (Bellcore) ; 95.7K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 230*158*67mm (L*W*H)
PACKING: 1.84Kg; 4pcs/ 9Kg / 1.63CUFT

OUTPUT (Power Supply mode)

DC VOLTAGE: 14.4V
VOLTAGE ADJUSTABLE RANGE: 10.5 ~ 21V
VOLTAGE ADJUSTABLE RANGE: By built-in potentionmeter
CURRENT ADJUSTABLE RANGE: 21.5 ~ 43A
RATED CURRENT: 43A
RATED POWER: 722.4W
RIPPLE & NOISE(max.): 180mVp-p
VOLTAGE TOLERANCE: ±1.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±1.0%
SETUP, RISE TIME: 1800ms, 60ms/230VAC at full load
HOLD UP TIME (Typ.): 16ms/230VAC at 75% load 10ms/230VAC at full load

INPUT (Power Supply mode)

VOLTAGE RANGE^Note.3: 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.98/115VAC, PF>0.95/230VAC at full load
EFFICIENCY (Typ.): 92%
AC CURRENT (Typ.): 8.7A/115VAC 4A/230VAC
INRUSH CURRENT (Typ.): COLD START 50A at 230VAC

PROTECTION (Power Supply mode)

OVERLOAD: 105 ~ 115% rated output power Protection type : Constant current limiting, unit will shutdown after 5 sec, re-power on to recover
SHORT CIRCUIT: Protection type : Constant current limiting, unit will shutdown after 5 sec, re-power on to recover
OVER VOLTAGE: 21.5 ~ 26V Protection type : Shut down and latch off o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down O/P voltage, recovers automatically after temperature goes down

FUNCTION (Power Supply mode)

REMOTE CONTROL: Open : Power OFF Short : Power ON
DC OK: The TTL signal out, DC OK = H(4.5 ~ 5.5V) ; Power supply failure or protection = L(-0.5 ~ +0.5V)
FAN SPEED CONTROL: Depends on internal temperature

ENVIRONMENT (Power Supply mode)

WORKING TEMP.: -30 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: ±0.05%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC (Power Supply mode)

SAFETY STANDARDS: CB IEC62368-1,IEC60335-1/2-29, Dekra BS EN/EN62368-1,BS EN/EN60335-1/2-29, UL62368-1, J62368-1,EAC TP TC 004 approved
WITHSTAND VOLTAGE: I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION^{Note 4}: Parameter Standard Test Level

Conducted BS EN/EN55032 (CISPR32),BS EN/EN55014-1 Class B
Radiated BS EN/EN55032 (CISPR32),BS EN/EN55014-1 Class B
Harmonic Current BS EN/EN61000-3-2 Class A
Voltage Flicker BS EN/EN61000-3-3
EMC IMMUNITY^{Note 4}: J55032(H29)

Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact
Radiated BS EN/EN61000-4-3 Level 2, 3V/m
EFT / Burst BS EN/EN61000-4-4 Level 2, 1KV
Surge BS EN/EN61000-4-5 Level 2, 1KV/Line-Line,Level 3, 2KV/Line-Earth
Conducted BS EN/EN61000-4-6 Level 2, 3Vrms
Magnetic Field BS EN/EN61000-4-8 Level 1, 1A/m
Voltage Dips and Interruptions BS EN/EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

Parameter	Standard	Test Level
Conducted	BS EN/EN55032 (CISPR32),BS EN/EN55014-1	Class B
Radiated	BS EN/EN55032 (CISPR32),BS EN/EN55014-1	Class B
Harmonic Current	BS EN/EN61000-3-2	Class A
Voltage Flicker	BS EN/EN61000-3-3

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, 8KV air; Level 2, 4KV contact
Radiated	BS EN/EN61000-4-3	Level 2, 3V/m
EFT / Burst	BS EN/EN61000-4-4	Level 2, 1KV
Surge	BS EN/EN61000-4-5	Level 2, 1KV/Line-Line,Level 3, 2KV/Line-Earth
Conducted	BS EN/EN61000-4-6	Level 2, 3Vrms
Magnetic Field	BS EN/EN61000-4-8	Level 1, 1A/m
Voltage Dips and Interruptions	BS EN/EN61000-4-11	>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

OTHERS (Power Supply mode)

MTBF: 883.5K hrs min. Telcordia SR-332 (Bellcore) ; 95.7K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 230*158*67mm (L*W*H)
PACKING: 1.84Kg; 4pcs/ 9Kg / 1.63CUFT

Test conditions and notes5

1. Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
2. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
3. Derating may be needed under low input voltages. Please check the derating curve for more details.
4. The PSU is considered a component which will be installed into a final equipment. All the radiation tests require an additional 13*26*30 NIZN magnetic clasp or magnetic ring to the output line for CLASS B and without NIZN magnetic clasp or magnetic ring for CLASS A. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
5. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

Technical drawings

NPP-750-12 Block Diagram — Block Diagram

NPP-750-12 Derating Curve — Derating Curve

NPP-750-12 Function Manual — Function Manual

NPP-750-12 Jumper(Pin 7 & 8) — Jumper(Pin 7 & 8)

NPP-750-12 3.Charger OK / DC OK Signal — 3.Charger OK / DC OK Signal

NPP-750-12 4.Remote ON-OFF Control — 4.Remote ON-OFF Control

NPP-750-12 Mechanical Specification — Mechanical Specification

NPP-750-12 Accessory List — Accessory List

NPP-750-12 ※ Carry handle (Optional accessory, battery charger and… — ※ Carry handle (Optional accessory, battery charger and…

NPP-750-12 INSTALLATION MANUAL — INSTALLATION MANUAL

Typical applications

Radio system backup solution
Electric scooter charger
Camping car、Buses、Heavy duty truck、Specialty vehicles
Surveillance system
Industrial automation machinery
Industrial control system
Mechanical and electrical equipment

Downloads

Catalogues1

Mean Well Catalog (Industrial) PDF Download

FAQ

What is the Mean Well NPP-750-12 designed for?

The NPP-750-12 is a dual-purpose unit that can operate as either a battery charger or a power supply, with the mode selected by jumper. It is aimed at professional and industrial use cases where a 12V-class supply is needed for charging lead-acid batteries or powering equipment from a single compact unit.

What are the key electrical ratings of the NPP-750-12?

This model is a 12V-class unit with a listed output voltage of 14.4V and a rated current of 43A. Its power rating is 722.4W, making it suitable for higher-demand DC applications that need substantial current from a single power source.

Is the NPP-750-12 suitable for lead-acid battery charging?

Yes. The product description specifically states that it is suitable for lead-acid batteries (flooded, Gel and AGM) and includes a 3-stage charging curve when used in charging mode. That makes it a fit for buyers looking for a charger/power-supply unit for compatible lead-acid battery applications.

What kinds of applications is this model commonly used for?

This series suits applications such as electric motorcycles, scooters, camping vehicles, UAVs, mobile robots, hand-held power tools, and floor scrubbers. It can also be used as a DC power source for industrial control, IT, communication, and security control systems when power-supply mode is required.

Can the NPP-750-12 handle demanding environments?

Yes, this model is specified for a wide operating temperature range of -30°C to +70°C, with output derating at higher temperatures per the derating curve. It also includes a built-in cooling fan that switches on and off depending on internal temperature.

What protection and compliance features does the NPP-750-12 include?

The unit includes built-in protection for short circuit, overload (in power supply mode), overvoltage, and overtemperature conditions. It also carries multiple safety approvals, including CB, UL62368-1, Dekra, J62368-1, and EAC, covering the 62368-1 and 60335-1/2-29 standards.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Battery Type	Battery Voltage	Charging Current
Mean Well NPP-750-48 759.4W 48V Battery Charge& Power Supply 2-in-1, Selectable via Jumper 11.3A	759.36W	Lithium and Lead Acid Battery	—	—	View
Mean Well NPP-750-24 756W 24V Battery Charge& Power Supply 2-in-1, Selectable via Jumper 22.5A	756W	Lithium and Lead Acid Battery	—	—	View

Please log in to write a review.

{ "id":9888893632832, "variants" :[{ "context":"default", "variant_id": 50972552790336, "sku":"NPP-750-12", "inventory_qty" : 0, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$174.99\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }