Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
GC30U-2P1J is the model of this series: rated current 3A, rated power 25.2W, typical efficiency 76%.
Features
- Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)(Note.1)
- Universal AC input / Full range
- With USA type 6FT power cord(2pin)
- Class II power (without earth pin)
- No load power consumption <1.0W
- Constant current and voltage(CC,CV mode)
- Suitable for continue load
- For high surge current equipment
- Protections: Short circuit / Overload / Over voltage / Over temp.
- 2 colors LED indicate for charging status
- Fully enclosed plastic case
- High reliability
- Approvals: UL / CUL / EAC / CB / FCC
- 2 years warranty
Specifications
OUTPUT
- SAFETY MODEL NO.
- GC30U-2
- DC VOLTAGE SET ATNote.3
- 8.4V
- RATED CURRENT
- 3A
- CURRENT RANGE
- 0 ~3A
- RATED POWER
- 25.2W
- RIPPLE & NOISE (max.)Note.4
- 80mVp-p
- CHARGING VOLTAGE RANGENote.5
- 7.7 ~ 8.6V
- LINE REGULATIONNote.6
- ±0.5%
- LED INDICATOR
- Green LED ON < 100mA, Red LED ON > 250mA
- SETUP, RISE, HOLD UP TIME
- 200ms, 50ms, 16ms at full load
INPUT
- VOLTAGE RANGE
- 90 ~ 264VAC 127 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- EFFICIENCY (Typ.)
- 76%
- AC CURRENT
- 0.7A / 100VAC; 0.35A/ 230VAC
- INRUSH CURRENT (max.)
- 40A / 230VAC
- LEAKAGE CURRENT(max.)
- 0.25mA / 240VAC
PROTECTION
- OVERLOAD
- 90 ~ 110% Constant current mode and over 300% pulsing mode Protection type : Constant current limiting, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 110 ~ 135% rated output voltage Protection type : Clamp by zener diode
- OVER TEMPERATURE
- IC1_Tj > 130℃ Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT
- WORKING TEMP.
- 0 ~ +50℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -20 ~ +85℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- UL62368-1, CSA22.2, EAC TP TC 004 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVAC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to FCC part 15 Class B, EAC TP TC 020
- EMC IMMUNITY
- Compliance to EAC TP TC 020
OTHERS
- DIMENSION
- 108*67*36mm (L*W*H)
- PACKING
- 405g; 36pcs / 16.5kg / CARTON
CONNECTOR
- PLUG
- Standard type P1J: 2.1ψ * 5.5ψ * 11mm, tuning fork type center positive for stock ; Other type available by customer requested
- CABLE
- Standard type 18Awg UL1185 6ft and 4ft for 4.2V~8.4V output only for stock ; Other type available by customer requested
Test conditions and notes6
- 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
- 2.All parameters are specified at 115VAC input, rated load, 25℃ 70% RH ambient.
- 3.DC voltage: The output voltage set at point measure by plug terminal & 0% load.
- 4.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 5.Output charging voltage range is measured from 0% to 100% rated load.
- 6.Line regulation is measured from low line to high line at rated load.
Technical drawings
Downloads
Certificates5
Catalogues1
FAQ
What is the Mean Well GC30U-2P1J designed for?
The GC30U-2P1J is an AC/DC power adaptor with charger function rated at 25.2W with an 8.4V output and 3A rated current. It is intended for lead-acid batteries including flooded, gel, and AGM types, as well as certain lithium-ion battery chemistries listed by the manufacturer.
What are the main electrical ratings of the GC30U-2P1J?
This model provides 8.4V output at up to 3A, for a total power rating of 25.2W. Its input range is universal at 90 to 264VAC or 127 to 370VDC, which supports use across a wide range of AC power sources.
Can the GC30U-2P1J be used as both a charger and a power supply?
Yes. Mean Well describes this model as an AC-DC power adaptor with charger function, and it operates in constant current and constant voltage modes. Its output current range is 0 to 3A at a set voltage of 8.4V.
What protection and status features does the GC30U-2P1J include?
The GC30U-2P1J includes protection for overload, over voltage, and over temperature conditions. It also has a red/green LED indicator that shows charging status.
Is the GC30U-2P1J suitable for demanding operating environments?
This model is rated for operation from 0°C to 50°C, subject to the manufacturer's derating guidance, at 20% to 90% RH non-condensing. It carries UL62368-1, CSA22.2, and EAC TP TC 004 safety approval and FCC Part 15 Class B EMC compliance.
How portable is the Mean Well GC30U-2P1J?
The unit measures 108 x 67 x 36 mm and has a listed weight of 405 g, which supports portable use in applications needing a compact external charger or power adapter.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.



