☎ (888) 228 9138

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well GC30E-4P1J Portable Chargers 30W 14.3V 2.09A - Green Adaptor

class II powerno load power consumption<1.0Wsuitable for continue loadfor high surge current equipment
SKU GC30E-4P1J
$37.51 USD
Shipping calculated at checkout.
Available to order
|

Overview

GC30E-4P1J is the model of this series: rated current 2.09A, rated power 30W, typical efficiency 78%.

Features

  • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese) (Note.1)
  • Universal AC input / Full range
  • With EURO type 6 FT power cord(2pin)
  • Class II power (without earth pin)
  • No load power consumption <1.0W
  • Constant current and voltage(CC,CV mode)
  • Suitable for continue load
  • For high surge current equipment
  • Protections: Short circuit / Overload / Over voltage / Over temp.
  • 2 colors LED indicate for loading status
  • Fully enclosed plastic case
  • High reliability
  • Approvals: TUV / EAC / CB / FCC / CE / UKCA
  • 2 years warranty

Specifications

GC30E-4P1JSpecifications from the official datasheet (2025-01-23 edition)

OUTPUT

SAFETY MODEL NO.
GC30E-4
DC VOLTAGE SET ATNote.3
14.3V
RATED CURRENT
2.09A
CURRENT RANGE
0 ~ 2.09A
RATED POWER
30W
RIPPLE & NOISE (max.)Note.4
100mVp-p
CHARGING VOLTAGE RANGENote.5
13.5 ~ 14.5V
LINE REGULATIONNote.6
±0.5%
LED INDICATOR
Green LED ON < 100mA, Red LED ON > 250mA
SETUP, RISE, HOLD UP TIME
200ms, 50ms, 16ms at full load

INPUT

VOLTAGE RANGE
90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
78%
AC CURRENT
0.7A / 100VAC; 0.35A/ 230VAC
INRUSH CURRENT (max.)
40A / 230VAC
LEAKAGE CURRENT(max.)
0.25mA / 240VAC

PROTECTION

OVERLOAD
90 ~ 110% Constant current mode and over 300% pulsing mode Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE
110 ~ 135% rated output voltage Protection type : Clamp by zener diode
OVER TEMPERATURE
IC1_Tj > 130℃ Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.
0 ~ +50℃(Refer to output load derating curve)
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-20 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
TUV BS EN/EN62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55014-1 class B, FCC part 15 Class B, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,11, light industry level, criteria A, EAC TP TC 020

OTHERS

DIMENSION
108*67*36mm (L*W*H)
PACKING
405g; 36pcs / 16.5kg / CARTON

CONNECTOR

PLUG
Standard type P1J: 2.1ψ * 5.5ψ * 11mm, tuning fork type center positive for stock ; Other type available by customer requested
CABLE
Standard type 18Awg UL1185 6ft and 4ft for 4.2V~8.4V output only for stock ; Other type available by customer requested
Test conditions and notes6
  1. 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
  2. 2.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient.
  3. 3.DC voltage: The output voltage set at point measure by plug terminal & 0% load.
  4. 4.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
  5. 5.Output charging voltage range is measured from 0% to 100% rated load.
  6. 6.Line regulation is measured from low line to high line at rated load.

Technical drawings

GC30E-4P1J Mechanical Specification
Mechanical Specification
GC30E-4P1J Charging Curve
Charging Curve
GC30E-4P1J Derating Curve
Derating Curve

Downloads

FAQ

What is the Mean Well GC30E-4P1J designed for?

The GC30E-4P1J is a 30W portable charger intended for lead-acid batteries, including flooded, gel, and AGM types, as well as certain lithium-ion battery chemistries noted by the manufacturer. It provides a 14.3V output at up to 2.09A. This makes it suitable for battery charging applications that match those output requirements.

What are the key electrical ratings of the GC30E-4P1J?

This model is rated for 30W output with a nominal output of 14.3V DC and 2.09A. It accepts a universal AC input range of 90 to 264VAC, and also supports 127 to 370VDC input. The charger operates in constant current and constant voltage modes.

Is the GC30E-4P1J suitable for portable or field use?

Yes, this model is described as a portable charger. Its compact dimensions of 108 x 67 x 36 mm and approximate weight of 405g make it easier to handle and transport than larger industrial chargers. Its DC output uses the standard P1J plug (2.1 x 5.5 x 11 mm, center positive).

What operating environment is the GC30E-4P1J rated for?

The specified working temperature range is 0°C to 50°C, with derating referenced by the manufacturer. This makes it appropriate for indoor and similar controlled-use environments within that temperature window. Buyers should confirm their application stays within the stated thermal limits.

What protections are included in the GC30E-4P1J?

The GC30E-4P1J includes protection for overload, over-voltage, and over-temperature conditions. Its over-voltage protection is specified at 110% to 135% of rated output voltage and clamps the output with a zener diode, while overload and over-temperature protection recover automatically. These features help protect both the charger and the connected load during abnormal conditions.

How can I tell the charging status on this model?

This charger includes a 2-color LED indicator for charging status: red while charging and green during float charging. That provides a quick visual status reference without needing external monitoring equipment. For buyers comparing portable chargers, this is a useful built-in status feature.

What approvals and warranty come with the GC30E-4P1J?

The datasheet lists safety approval to TUV BS EN/EN62368-1 and EAC TP TC 004. EMC compliance includes BS EN/EN55014-1 Class B, FCC Part 15 Class B, and EAC TP TC 020. The datasheet does not state a warranty period for this model.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8655508504896, "variants" :[{ "context":"default", "variant_id": 46624678281536, "sku":"GC30E-4P1J", "inventory_qty" : 0, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$37.51\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well GC30E-4P1J Portable Chargers 30W 14.3V 2.09A - Green Adaptor
Mean Well

Mean Well GC30E-4P1J Portable Chargers 30W 14.3V 2.09A - Green Adaptor

$37.51 USD

GC30E-4P1J is the model of this series: rated current 2.09A, rated power 30W, typical efficiency 78%.

Features

  • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese) (Note.1)
  • Universal AC input / Full range
  • With EURO type 6 FT power cord(2pin)
  • Class II power (without earth pin)
  • No load power consumption <1.0W
  • Constant current and voltage(CC,CV mode)
  • Suitable for continue load
  • For high surge current equipment
  • Protections: Short circuit / Overload / Over voltage / Over temp.
  • 2 colors LED indicate for loading status
  • Fully enclosed plastic case
  • High reliability
  • Approvals: TUV / EAC / CB / FCC / CE / UKCA
  • 2 years warranty
View product

  • Call us

    (888) 228 9138

  • Email us

    contact@wellforces.com

  • Business Hours

    Mon-Fri
    EST 9:00am-5:30pm

  • Wholesale and Trade Account

    Let's grow together
Back to top