Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
GC30E-2P1J is the model of this series: rated current 3A, rated power 25.2W, typical efficiency 76%.
Features
- Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese) (Note.1)
- Universal AC input / Full range
- With EURO type 6 FT power cord(2pin)
- Class II power (without earth pin)
- No load power consumption <1.0W
- Constant current and voltage(CC,CV mode)
- Suitable for continue load
- For high surge current equipment
- Protections: Short circuit / Overload / Over voltage / Over temp.
- 2 colors LED indicate for loading status
- Fully enclosed plastic case
- High reliability
- Approvals: TUV / EAC / CB / FCC / CE / UKCA
- 2 years warranty
Specifications
OUTPUT
- SAFETY MODEL NO.
- GC30E-2
- DC VOLTAGE SET ATNote.3
- 8.4V
- RATED CURRENT
- 3A
- CURRENT RANGE
- 0 ~3A
- RATED POWER
- 25.2W
- RIPPLE & NOISE (max.)Note.4
- 80mVp-p
- CHARGING VOLTAGE RANGENote.5
- 7.7 ~ 8.6V
- LINE REGULATIONNote.6
- ±0.5%
- LED INDICATOR
- Green LED ON < 100mA, Red LED ON > 250mA
- SETUP, RISE, HOLD UP TIME
- 200ms, 50ms, 16ms at full load
INPUT
- VOLTAGE RANGE
- 90 ~ 264VAC 127 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- EFFICIENCY (Typ.)
- 76%
- AC CURRENT
- 0.7A / 100VAC; 0.35A/ 230VAC
- INRUSH CURRENT (max.)
- 40A / 230VAC
- LEAKAGE CURRENT(max.)
- 0.25mA / 240VAC
PROTECTION
- OVERLOAD
- 90 ~ 110% Constant current mode and over 300% pulsing mode Protection type : Constant current limiting, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 110 ~ 135% rated output voltage Protection type : Clamp by zener diode
- OVER TEMPERATURE
- IC1_Tj > 130℃ Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT
- WORKING TEMP.
- 0 ~ +50℃(Refer to output load derating curve)
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -20 ~ +85℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- TUV BS EN/EN62368-1, EAC TP TC 004 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVAC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55014-1 class B, FCC part 15 Class B, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,11, light industry level, criteria A, EAC TP TC 020
OTHERS
- DIMENSION
- 108*67*36mm (L*W*H)
- PACKING
- 405g; 36pcs / 16.5kg / CARTON
CONNECTOR
- PLUG
- Standard type P1J: 2.1ψ * 5.5ψ * 11mm, tuning fork type center positive for stock ; Other type available by customer requested
- CABLE
- Standard type 18Awg UL1185 6ft and 4ft for 4.2V~8.4V output only for stock ; Other type available by customer requested
Test conditions and notes6
- 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
- 2.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient.
- 3.DC voltage: The output voltage set at point measure by plug terminal & 0% load.
- 4.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 5.Output charging voltage range is measured from 0% to 100% rated load.
- 6.Line regulation is measured from low line to high line at rated load.
Technical drawings
Downloads
Certificates8
Catalogues1
FAQ
What kind of product is the Mean Well GC30E-2P1J?
The GC30E-2P1J is a portable AC/DC charger and power supply rated at 25.2W. It provides an 8.4V output at up to 3A in a compact 108 x 67 x 36 mm housing. This model is designed for buyers who need a small external power unit from a recognized industrial brand.
What battery chemistries is the GC30E-2P1J intended for?
According to the provided product data, this model is intended for lead-acid batteries including flooded, gel, and AGM types, as well as Li-ion batteries including lithium iron and lithium manganese. Buyers should confirm that the target battery pack matches the charger’s 8.4V output requirement. That makes voltage matching a key compatibility check for this model.
Is the GC30E-2P1J suitable for portable or field-use equipment?
Yes, this model is positioned as a portable charger and has a compact size of 108 x 67 x 36 mm with a weight of about 405g. It is specified for 0 to 50°C ambient and 20% to 90% RH non-condensing humidity, so field use should stay within those limits. For buyers comparing footprint and transportability, it is built for light portable use rather than large fixed installations.
What input range and protection features does this charger offer?
The GC30E-2P1J accepts a universal AC input range of 90 to 264VAC, or 127 to 370VDC. It includes overload, over-voltage, and over-temperature protection, and it operates in constant current and constant voltage modes. Overload protection uses constant current limiting and recovers automatically once the fault is removed.
Can the GC30E-2P1J be used in typical indoor operating environments?
This model has a specified working temperature range of 0°C to 50°C, based on the derating curve referenced in the product data. That makes it appropriate for many standard indoor commercial and industrial environments within that temperature window. Buyers with hotter or colder conditions should verify whether their application stays inside the stated range.
How can buyers compare the GC30E-2P1J with other compact chargers or power supplies?
The main comparison points for this model are its 8.4V, 3A output, 25.2W power rating, portable form factor, and support for multiple battery chemistries listed in the product data. It also offers 76% typical efficiency, a 2-color LED charging-status indicator, and approvals including TUV BS EN/EN62368-1 and EAC TP TC 004. Those details make it a strong fit when buyers need a compact branded unit with broad input range and standard safety coverage.
What certifications and warranty are listed for the GC30E-2P1J?
The datasheet lists safety approval to TUV BS EN/EN62368-1 and EAC TP TC 004. EMC emission standards include BS EN/EN55014-1 Class B, FCC Part 15 Class B, and EAC TP TC 020. The datasheet does not state a warranty period for this model.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.



