Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
GC30E-11P1J is the model of this series: rated current 3A, rated power 21.6W, typical efficiency 74%.
Features
- Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese) (Note.1)
- Universal AC input / Full range
- With EURO type 6 FT power cord(2pin)
- Class II power (without earth pin)
- No load power consumption <1.0W
- Constant current and voltage(CC,CV mode)
- Suitable for continue load
- For high surge current equipment
- Protections: Short circuit / Overload / Over voltage / Over temp.
- 2 colors LED indicate for loading status
- Fully enclosed plastic case
- High reliability
- Approvals: TUV / EAC / CB / FCC / CE / UKCA
- 2 years warranty
Specifications
OUTPUT
- SAFETY MODEL NO.
- GC30E-11
- DC VOLTAGE SET ATNote.3
- 7.2V
- RATED CURRENT
- 3A
- CURRENT RANGE
- 0 ~ 3A
- RATED POWER
- 21.6W
- RIPPLE & NOISE (max.)Note.4
- 80mVp-p
- CHARGING VOLTAGE RANGENote.5
- 6.5 ~ 7.5V
- LINE REGULATIONNote.6
- ±0.5%
- LED INDICATOR
- Green LED ON < 100mA, Red LED ON > 250mA
- SETUP, RISE, HOLD UP TIME
- 200ms, 50ms, 16ms at full load
INPUT
- VOLTAGE RANGE
- 90 ~ 264VAC 127 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- EFFICIENCY (Typ.)
- 74%
- AC CURRENT
- 0.7A / 100VAC; 0.35A/ 230VAC
- INRUSH CURRENT (max.)
- 40A / 230VAC
- LEAKAGE CURRENT(max.)
- 0.25mA / 240VAC
PROTECTION
- OVERLOAD
- 90 ~ 110% Constant current mode and over 300% pulsing mode Protection type : Constant current limiting, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 110 ~ 135% rated output voltage Protection type : Clamp by zener diode
- OVER TEMPERATURE
- IC1_Tj > 130℃ Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT
- WORKING TEMP.
- 0 ~ +50℃(Refer to output load derating curve)
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -20 ~ +85℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03% / ℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- TUV BS EN/EN62368-1, EAC TP TC 004 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVAC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55014-1 class B, FCC part 15 Class B, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,11, light industry level, criteria A, EAC TP TC 020
OTHERS
- DIMENSION
- 108*67*36mm (L*W*H)
- PACKING
- 405g; 36pcs / 16.5kg / CARTON
CONNECTOR
- PLUG
- Standard type P1J: 2.1ψ * 5.5ψ * 11mm, tuning fork type center positive for stock ; Other type available by customer requested
- CABLE
- Standard type 18Awg UL1185 6ft and 4ft for 4.2V~8.4V output only for stock ; Other type available by customer requested
Test conditions and notes6
- 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
- 2.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient.
- 3.DC voltage: The output voltage set at point measure by plug terminal & 0% load.
- 4.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 5.Output charging voltage range is measured from 0% to 100% rated load.
- 6.Line regulation is measured from low line to high line at rated load.
Technical drawings
Downloads
Certificates8
Catalogues1
FAQ
What is the Mean Well GC30E-11P1J designed for?
The GC30E-11P1J is a 21.6W portable charger and green adaptor designed for battery charging applications and DC power use. The product description states it is suitable for lead-acid batteries including flooded, gel, and AGM types, as well as certain lithium-ion battery chemistries noted by the manufacturer. Its compact 108 x 67 x 36 mm size also makes it suitable for portable and OEM equipment contexts.
What are the key output specifications of the GC30E-11P1J?
This model provides a 7.2V output rated at 3A, for a total power rating of 21.6W. It operates in constant current and constant voltage modes, which is typical for charger-style power supplies. These published ratings make it a fit for applications that require this exact voltage and current class.
What input range does the GC30E-11P1J support?
The GC30E-11P1J supports universal AC input with a specified range of 90 to 264VAC, and it also lists a 127 to 370VDC input range. This wide input range helps the unit work across different regional mains standards. The specified input frequency range is 47 to 63Hz.
Can this model be used in continuous-duty applications?
The datasheet rates the GC30E-11P1J for 3A at 7.2V, with load derated at higher ambient temperatures according to the derating curve. It uses constant current and constant voltage operation. Applications should stay within the rated current and the 0 to 50 degrees C working range.
What protections and status indication does the GC30E-11P1J include?
This model includes protection for overload, over voltage, and over temperature. It also features a 2-color LED indicator for charging status. These built-in protections help support safer operation in demanding commercial and industrial use cases.
What operating environment is the GC30E-11P1J rated for?
The specified working temperature range is 0 to 50 degrees C, with reference to the manufacturer's derating curve. Working humidity is 20% to 90% RH non-condensing. Buyers should confirm their ambient conditions stay within the published operating range.
What certifications and compliance approvals does this charger have?
The datasheet lists safety approval to TUV BS EN/EN62368-1 and EAC TP TC 004, plus EMC standards including BS EN/EN55014-1 Class B, FCC Part 15 Class B, and EAC TP TC 020. These approvals are useful for OEMs and business buyers that need documented compliance coverage.
How compact is the Mean Well GC30E-11P1J?
The published dimensions are 108 x 67 x 36 mm, and the listed unit weight is 405 g. That makes it a compact portable charger for applications where size and handling matter. Its DC output uses the standard P1J plug (2.1 x 5.5 x 11 mm, center positive).
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.



