Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well XLG-20-L 18.9W 350mA 32.4-54V Constant Current LED Driver

Name: Mean Well XLG-20-L 18.9W 350mA 32.4-54V Constant Current LED Driver
Brand: Mean Well
SKU: XLG-20-L
Price: 17.87 USD
Availability: InStock

$17.87 USD

Shipping calculated at checkout.

Notify me when it's back in stock

Your order will be processed within 24 hours

Overview

XLG-20-L is the model of this series: rated power 18.9W, typical efficiency 89%.

XLG-20 series is a AC/DC LED driver featuring the constant current mode output. XLG-20 operates from 90~305VAC. Thanks to the high efficiency up to 89%, The entire series is able to operate between -40℃ ~+80℃ wide case temperature range with air convection. The design of metal housing and IP67 ingress protection allows this series to fit both indoor and outdoor applications.XLG-20 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.XLG-20 series comply with the latest version of IEC61347/GB7000.1 -2015 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both user and luminaire system during installation.

Features

Constant current mode output
Wide input range 90~305VAC (Class Ⅰ)
Built-in active PFC function
Class 2 power unit
No load power consumption <0.5W
IP67 rating for indoor or outdoor installations
3 in 1 dimming function (Isolation design)
Life time>50,000 hours and 5 years warranty

Specifications

XLG-20-LSpecifications from the official datasheet (2026-02-04 edition)

OUTPUT

RATED CURRENT (Default): 350mA
CONSTANT CURRENT REGION: 32.4 ~ 54V
RATED POWER: 18.9W
OPEN CIRCUIT VOLTAGE (max.): 60V
CURRENT TOLERANCE: ±8.0%
OUTPUT CURRENT RIPPLE^Note.13: < 20%
SETUP, RISE TIME^Note.2: 500ms, 150ms/115VAC, 230VAC
LINE REGULATION: < ±3%

INPUT

VOLTAGE RANGE^Note.3: 90 ~ 305VAC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR: PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.91/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION: THD< 20%(@load≧50%/115VC,230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY (Typ.): 89%
AC CURRENT: 0.3A / 115VAC 0.2A / 230VAC 0.2A/277VAC
INRUSH CURRENT(Typ.): COLD START 5A(twidth=350μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 42 units (circuit breaker of type B) / 42 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.75mA / 277VAC
NO LOAD POWER CONSUMPTION: No load power consumption <0.5W

PROTECTION

SHORT CIRCUIT: Hiccup mode, recovers automatically after fault condition is removed.

ENVIRONMENT

WORKING TEMP.: Tcase=-40 ~ +80℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.: Tcase=+80℃
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP.: -40 ~ +80℃
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 60℃)
VIBRATION: 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: UL8750(type"HL"), CSA C22.2 No. 250.13-12; ENEC AS/NZS IEC BS EN/EN61347-1, AS/NZS BS EN/EN61347-2-13 independent, BS EN/EN62384; IP67; GB/T19510.1, GB/T19510.213, J61347-1(H29), J61347-2-13(H29), EAC TP TC 004, IS 15885(Part 2/Sec13) , KC61347-1,KC61347-2-13 approved
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55015(CISPR15) ,GB/T 17743,J55015(H29)
Radiated BS EN/EN55015(CISPR15) ,GB/T 17743,J55015(H29)
Harmonic Current BS EN/EN61000-3-2 ,GB17625.1 Class C @load≥50%
Voltage Flicker BS EN/EN61000-3-3
EMC IMMUNITY: BS EN/EN61547

Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact
Radiated BS EN/EN61000-4-3 Level 3
EFT/Burst BS EN/EN61000-4-4 Level 3
Surge BS EN/EN61000-4-5 2KV/Line-Line 4KV/Line-Earth
Conducted BS EN/EN61000-4-6 Level 3
Magnetic Field BS EN/EN61000-4-8 Level 4
Voltage Dips and Interruptions BS EN/EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

Parameter	Standard	Test Level
Conducted	BS EN/EN55015(CISPR15) ,GB/T 17743,J55015(H29)
Radiated	BS EN/EN55015(CISPR15) ,GB/T 17743,J55015(H29)
Harmonic Current	BS EN/EN61000-3-2 ,GB17625.1	Class C @load≥50%
Voltage Flicker	BS EN/EN61000-3-3

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, 8KV air; Level 2, 4KV contact
Radiated	BS EN/EN61000-4-3	Level 3
EFT/Burst	BS EN/EN61000-4-4	Level 3
Surge	BS EN/EN61000-4-5	2KV/Line-Line 4KV/Line-Earth
Conducted	BS EN/EN61000-4-6	Level 3
Magnetic Field	BS EN/EN61000-4-8	Level 4
Voltage Dips and Interruptions	BS EN/EN61000-4-11	>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods

OTHERS

MTBF: 5721.2K hrs min. Telcordia SR-332 (Bellcore) 747.1Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 95*63*30mm (L*W*H)
PACKING: 0.34Kg;24pcs/ 8.67Kg/0.81CUFT for blank-type 0.35Kg;24pcs/ 8.88Kg/0.\81CUFT for B-type

Certifications & ratings

Type: HL

Test conditions and notes13

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
4. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
5. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80℃ or less.
6. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
8. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.
9. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
10. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
11. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.
12. If you need the NOM (Mexico) certificate, Please contact MEAN WELL sales representative for details.
13. Output current ripple is meansured at 230VAC input, full load and 25℃ of ambient temperature.

Technical drawings

XLG-20-L OUTPUT LOAD vs TEMPERATURE — OUTPUT LOAD vs TEMPERATURE

XLG-20-L STATIC CHARACTERISTIC — STATIC CHARACTERISTIC

XLG-20-L TOTAL HARMONIC DISTORTION — TOTAL HARMONIC DISTORTION

XLG-20-L DIMMING OPERATION — DIMMING OPERATION

XLG-20-L Mechanical Specification — Mechanical Specification

XLG-20-L Recommend Mounting Direction — Recommend Mounting Direction

Typical applications

Street lighting
Architectural lighting
Low bay lighting
Floodlight lighting
Industrial Lighting
Type "HL" for use in Class I, Division 2 hazardous (Classified) location.

Downloads

Certificates2

Mean Well IDLC Series UL Certificate PDF Download

Mean Well IDLC Series EAC Certificate PDF Download

FAQ

Can the XLG-20-L drive LED modules in a compact outdoor pathway or step light?

Yes. At 18.9W and 350mA constant current, the XLG-20-L is well suited for small outdoor pathway, step, or in-ground LED fixtures. Its IP67 rating and -40°C to +80°C operating range support year-round outdoor use.

Is the XLG-20-L appropriate for powering LED modules in architectural soffit or façade lighting?

Yes. The 350mA constant current output within a 32–54V range matches common mid-voltage LED modules used in architectural soffit or façade fixtures. The IP67 waterproof rating supports outdoor installation.

Can the XLG-20-L be installed in a marine or high-humidity environment?

The IP67 rating protects against dust and temporary water immersion, making the XLG-20-L suitable for high-humidity environments. For full marine submersion, a higher IP rating would be required.

How does the LED string voltage requirement for the XLG-20-L differ from the XLG-20-H?

The XLG-20-L supplies 350mA constant current across a 32.4–54V output range. The XLG-20-H supplies 700mA across an 18–30V range. The L variant suits longer or higher-voltage LED strings at lower current, while the H variant suits shorter strings at higher current.

How many LEDs can be placed in series on the XLG-20-L?

The XLG-20-L supplies 350mA constant current across a 32–54V output range. The number of LEDs in series depends on the forward voltage of each individual LED — the combined string voltage must fall within that 32–54V window.

Can the XLG-20-L power a small LED signage module for an illuminated address or room number sign?

Yes. At 18.9W and 350mA, the XLG-20-L can drive small LED signage modules used in illuminated address plates, room number signs, or similar low-wattage applications, provided the LED string voltage is within 32–54V.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":9869654425920, "variants" :[{ "context":"default", "variant_id": 50903267803456, "sku":"XLG-20-L", "inventory_qty" : 0, "customer" : true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$17.87\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e\n", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }