Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well XLC-40-H-MAS LED Driver 40W 1050mA 9~54V Constant Power, Current Setting by Dip Switch, Matter Wireless Dimming with Strain Relief

Name: Mean Well XLC-40-H-MAS LED Driver 40W 1050mA 9~54V Constant Power, Current Setting by Dip Switch, Matter Wireless Dimming with Strain Relief
Brand: Mean Well
SKU: XLC-40-H-MAS
Price: 144.21 USD
Availability: InStock

$144.21 USD

Shipping calculated at checkout.

Notify me when it's back in stock

Your order will be processed within 24 hours

Overview

XLC-40-H-MAS is the model of this series: rated power 40W, typical efficiency 88%.

XLC-40-MA series is a 40W with constant power output LED driver . It can operate from 100~305VAC and output current ranging between 600 mA to 1400 mA selectable by DIP switch . Thanks to high efficiency up to 88%, it is able to operate for -25℃~90℃ case temperature under free air convection. XLC-40-MA series is designed based on latest safety regulations with Matter wireless dimming.It provides more flexibility for LED Lighting application.

Features

Constant power mode output with multiple stage selectable by DIP switch
Plastic housing with class II and PFC design
Flicker free, complying with CE ErP directive
Standby power consumption <0.5W
Meet emergency lighting (EL) function application
Minimum dimming level 0.5%
Matter over thread, Matter 1.3 specification
5 years warranty

Specifications

XLC-40-H-MASSpecifications from the official datasheet (2025-02-24 edition)

OUTPUT

OPEN CIRCUIT VOLTAGE^Note.2: 60V
DEFAULT CURRENT: 1050mA
CURRENT ADJ.RANGE (BY DIP SWITCH): 0.6~1.4A
CONSTANT CURRENT REGION^Note.3: 9~54V
RATED POWER^Note.4: 40W
CURRENT RIPPLE: <4%(@full load)
CURRENT TOLERANCE: ±5%
DIMMING RANGE: 0~100%
SETUP, RISE TIME^Note.5: 2500ms, 100ms/230VAC, 2500ms, 100ms/115VAC

INPUT

VOLTAGE RANGE: 100 ~ 305VAC 141 ~ 400VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR: PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION: THD<10%(@load≧50%/230VAC; @load≧75%/277VAC), THD<15%(@load≧50%/115VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY (Typ.)^Note.6: 88%
AC CURRENT: 0.5A / 115VAC 0.25A / 230VAC 0.2A/277VAC
INRUSH CURRENT(Typ.): COLD START 10A(twidth=100μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 51 units (circuit breaker of type B) / 51 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.75mA / 277VAC
STANDBY POWER CONSUMPTION^Note.7: Standby power consumption<0.5W(Dimming off)

PROTECTION

SHORT CIRCUIT: Hiccup mode, recovers automatically after fault condition is removed
OVER TEMPERATURE: Stage 1: De-rating to 75% loading; Stage 2: De-rating to 50% loading. Recovers automatically after fault condition is removed.

ENVIRONMENT

WORKING TEMP.: Tcase=-25 ~ 90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.: Tcase=90℃
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations( DC input 176-280V DC); BS EN/EN62384, GB/T 19510.1, GB/T 19510.213, EAC TP TC 004 ; CSA C22.2 No. 250.13-12 approved ; Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13;
WITHSTAND VOLTAGE: I/P-O/P: 3.75KVAC
ISOLATION RESISTANCE: I/P-O/P: >100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55015(CISPR15) ,GB/T 17743
Radiated BS EN/EN55015(CISPR15) ,GB/T 17743
Harmonic Current BS EN/EN61000-3-2 , GB17625.1 Class C @load≥50%
Voltage Flicker BS EN/EN61000-3-3 -----; BS EN/EN61547
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact
Radiated BS EN/EN61000-4-3 Level 2
EFT/Burst BS EN/EN61000-4-4 Level 2
Surge BS EN/EN61000-4-5 Level3, 1KV/Line-Line
Conducted BS EN/EN61000-4-6 Level 2
Magnetic Field BS EN/EN61000-4-8 Level 2
Voltage Dips and Interruptions BS EN/EN61000-4-11 70% residual voltage for 10 period, 0% residual voltage for 0.5 periods

Parameter	Standard	Test Level
Conducted	BS EN/EN55015(CISPR15) ,GB/T 17743
Radiated	BS EN/EN55015(CISPR15) ,GB/T 17743
Harmonic Current	BS EN/EN61000-3-2 , GB17625.1	Class C @load≥50%
Voltage Flicker	BS EN/EN61000-3-3	-----; BS EN/EN61547

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, 8KV air; Level 2, 4KV contact
Radiated	BS EN/EN61000-4-3	Level 2
EFT/Burst	BS EN/EN61000-4-4	Level 2
Surge	BS EN/EN61000-4-5	Level3, 1KV/Line-Line
Conducted	BS EN/EN61000-4-6	Level 2
Magnetic Field	BS EN/EN61000-4-8	Level 2
Voltage Dips and Interruptions	BS EN/EN61000-4-11	70% residual voltage for 10 period, 0% residual voltage for 0.5 periods

OTHERS

MATTER STANDARD: Matter 1.3 Specification
FLICKER^Note.8: PstLM ≤ 1, SVM ≤ 0.4
MTBF: 3935.2 K hrs min. Telcordia SR-332 (Bellcore); 342.9 Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 147*40*32mm,107*40*32mm (L*W*H)
PACKING: 193g; 60pcs/12.58Kg/0.58CUFT(for blank type); 210g; 50pcs/11.5Kg/0.57CUFT(for S-type)

Test conditions and notes13

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Output hiccups under no-load condition.
3. Please refer to “DRIVER METHODS OF LED MODULE”.
4. De-rating may be need under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
5. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
6. Efficiency is measured at 800mA/50V output set by dip-switch.
7. Standby power consumption is measured at 230VAC.
8. Flicker is measured at full load with LED modules.
9. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
10. For XLC-S series: RCM is on a voluntary basis. Non IC classification Independent LED control gear is not suitable for residential installations. For XLC(except -S) series: RCM is on a voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1
11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less.
12. The ambient temperature de-rating of 3.5℃/1000m with fanless models and 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
13. For more information, please contact with MEAN WELL sales.

Technical drawings

XLC-40-H-MAS BLOCK DIAGRAM — BLOCK DIAGRAM

XLC-40-H-MAS DRIVING METHODS OF LED MODULE — DRIVING METHODS OF LED MODULE

XLC-40-H-MAS OUTPUT LOAD vs TEMPERATURE — OUTPUT LOAD vs TEMPERATURE

XLC-40-H-MAS TOTAL HARMONIC DISTORTION (THD) — TOTAL HARMONIC DISTORTION (THD)

XLC-40-H-MAS POWER FACTOR (PF) CHARACTERISTIC — POWER FACTOR (PF) CHARACTERISTIC

XLC-40-H-MAS EFFICIENCY vs LOAD — EFFICIENCY vs LOAD

XLC-40-H-MAS MECHANICAL SPECIFICATION — MECHANICAL SPECIFICATION

XLC-40-H-MAS ※ By RESET BUTTON — ※ By RESET BUTTON

XLC-40-H-MAS FACTORY RESET — FACTORY RESET

XLC-40-H-MAS Antenna location — Antenna location

Typical applications

Downloads

Datasheet1

XLC-40-H-MAS datasheetXLC_40_MA_MAS_spec_sheet.pdf · 2025-02-24 edition PDF Download

FAQ

Can the XLC-40-H-MAS dim LED downlights wirelessly through a Matter smart home system?

Yes, the XLC-40-H-MAS supports Matter 1.3 wireless dimming and integrates with Matter-compatible controllers, apps, and voice assistants. It delivers 40W at 1050mA constant current and can power LED downlights in the 9–54V CC range, allowing scene-based or automated brightness control without a separate in-wall dimmer.

Is the XLC-40-H-MAS a good option for commercial LED downlight installations that require wireless control and cable strain relief?

The XLC-40-H-MAS is well suited to commercial installations where both Matter wireless dimming and mechanical cable security are needed. The built-in strain-relief fitting protects the output cable connection in applications where cables are routed through conduit or subject to tension, while Matter 1.3 enables integration with building or hospitality control systems.

Can the XLC-40-H-MAS power LED modules in architectural or cove lighting with automated scene control?

Yes, the XLC-40-H-MAS suits architectural cove lighting where scene automation is managed through a Matter hub. Its 40W, 1050mA output drives LED arrays in the 9–54V CC range, and the flicker-free design ensures consistent light quality during smooth dimming transitions triggered by schedules or occupancy sensors.

What is the difference between the XLC-40-H-MA and the XLC-40-H-MAS?

Both the XLC-40-H-MA and XLC-40-H-MAS deliver 40W at 1050mA with Matter 1.3 wireless dimming and identical CC voltage range, certifications, and current adjustment capability. The XLC-40-H-MAS adds a factory-fitted strain-relief cable fitting and has a longer 147.0mm body versus the XLC-40-H-MA's 107.0mm body. The strain-relief variant is preferable where output cables may experience mechanical stress.

What LED array voltage range is the XLC-40-H-MAS compatible with?

The XLC-40-H-MAS constant current output spans a CC voltage range of 9–54V, making it compatible with a broad variety of LED arrays and modules. The exact number of LEDs per string depends on the forward voltage of each LED — you should sum the Vf values of your specific LEDs to confirm they fall within this range.

Can the XLC-40-H-MAS be installed inside an enclosed luminaire in a warm ceiling space?

Yes, the XLC-40-H-MAS is designed for built-in installation inside a luminaire or enclosure. Its operating temperature range of -25°C to +90°C covers the elevated ambient conditions found in enclosed ceiling fixtures and recessed housings. It is Class II rated and does not require an earth connection.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":9757419405632, "variants" :[{ "context":"default", "variant_id": 50423555916096, "sku":"XLC-40-H-MAS", "inventory_qty" : 0, "customer" : true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$144.21\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e\n", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }