Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well LPHC-18-350 AC-DC Single output LED driver Constant Current

Name: Mean Well LPHC-18-350 AC-DC Single output LED driver Constant Current
Brand: Mean Well
SKU: LPHC-18-350
Price: 8.42 USD
Availability: InStock

slim plastic caseeconomicalIP67

SKU LPHC-18-350

$8.42 USD

Shipping calculated at checkout.

In stock

Overview

LPHC-18-350 is the model of this series: rated current 350mA, rated power 16.8W, typical efficiency 80%.

Features

Constant current mode power supply
180-264VAC input only
Fully encapsulated with IP67 level (Note.5)
Protections:Short circuit / Over voltage / Over temperature
Cooling by free air convection
Class Ⅱ power unit, no FG
Pass LPS
100% full load burn-in test
Display devices for decorative & advertising accessories (Note.6)
High reliability / Low cost
2 years warranty

Specifications

LPHC-18-350Specifications from the official datasheet (2026-09-07 edition)

OUTPUT

RATED CURRENT: 350mA
CONSTANT CURRENT REGION: 6~48V
RATED POWER: 16.8W
CURRENT RIPPLE^Note.2: ±5%
VOLTAGE TOLERANCE: ±5.0%
CURRENT ACCURACY: ±8.0%
SETUP, RISE TIME: 3600ms, 100ms / 230VAC
HOLD UP TIME (Typ.): 20ms/230VAC at full load

INPUT

VOLTAGE RANGE: 180 ~ 264VAC 254 ~ 370VDC
FREQUENCY RANGE: 47 ~ 63Hz
EFFICIENCY(Typ.): 80%
AC CURRENT: 0.3A/230VAC
INRUSH CURRENT(Typ.): COLD START 50A(twidth=190μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 13 units (circuit breaker of type B) / 22 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: 0.25mA / 240VAC

PROTECTION

OVER VOLTAGE: 50.4~ 60V Protection type : Shut off o/p voltage, clamping by zener diode
OVER TEMPERATURE: Tj 170℃ typically (U1) Detect on main control IC Protection type : Hiccup mode, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.: -30~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.2%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC (Note 5)

SAFETY STANDARDS: BIS IS15885, EAC TP TC 004, IP67,LVD BS EN/EN62368-1 approved; design refer to UL1310 Class 2, CAN/CSA C22.2 No. 223-M91
WITHSTAND VOLTAGE: I/P-O/P:3KVAC
ISOLATION RESISTANCE: I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55032 (CISPR32) Class A, BS EN/EN61000-3-2 Class A, BS EN/EN61000-3-3, EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level, EAC TP TC 020

OTHERS

MTBF: 7399.9K hrs min. Telcordia SR-332 (Bellcore) ; 1086.9Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 140*30*22(L*W*H)
PACKING: 0.175Kg; 70pcs/13.3Kgs/0.71CUFT

Test conditions and notes6

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Current ripple is measured 60%~100% of maximum voltage under rated power delivery.
3. Derating may be needed under low input voltage. Please check the static characteristic for more details.
4. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
5. Suitable for indoor use or outdoor use without direct sunlight exposure.
6. This product is not intended for LED applications in the EU and China.(In the EU NPF/LPF/XLG series are recommended.)

Technical drawings

LPHC-18-350 Mechanical Specification — Mechanical Specification

LPHC-18-350 Recommend Mounting Direction — Recommend Mounting Direction

LPHC-18-350 Block Diagram — Block Diagram

Downloads

Certificates1

EMC Certificate (LPHC-18)(EN) PDF Download

Test reports1

Test Report (LPHC-18-350)(EN) PDF Download

Catalogues1

Mean Well LED Driver Catalog PDF Download

FAQ

Can the LPHC-18-350 be used with a 350mA LED downlight?

Yes, this driver is designed for constant current LED loads at 350mA. It can be used with LED downlights that require 350mA as long as the total forward voltage of the LED load stays within the 6-48V constant current range.

Is the LPHC-18-350 suitable for signage modules or small LED arrays?

It can be suitable for signage modules or small LED arrays when the LEDs are meant to run from a constant current source at 350mA. The connected load must fall within the 6-48V constant current range, and the exact number of LEDs depends on the forward voltage of each LED.

Can I use this driver for a custom LED light assembly instead of a constant voltage power supply?

This model is a constant current driver, not a constant voltage power supply. It is intended for LED assemblies specified for 350mA operation, with total forward voltage inside the 6-48V constant current range.

How do I know if the LPHC-18-350 is compatible with my LED load?

The key checks are output type, current, and voltage range. Your LED load must require constant current at 350mA, and its total forward voltage must fall within 6-48V; the exact number of LEDs depends on each LED forward voltage.

Can the LPHC-18-350 be used in damp or outdoor conditions?

This driver is fully encapsulated to IP67, so it is built for wet and dusty environments, and it may be used outdoors without direct sunlight exposure. Its operating temperature range is -30°C to +70°C with load derating at higher temperatures, which supports demanding ambient conditions when the rest of the system is rated accordingly.

What is the difference between the LPHC-18-350 and LPHC-18-700?

The LPHC-18-350 outputs 350mA with a 6-48V constant current range and 16.8W power, while the LPHC-18-700 outputs 700mA with a 6-25V constant current range and 17.5W power. Both models use 180-264VAC input, carry an IP67 rating, and share the same 140.0 × 30.0 × 22.0 mm housing and 0.175 kg weight.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":8934978289984, "variants" :[{ "context":"default", "variant_id": 47408139403584, "sku":"LPHC-18-350", "inventory_qty" : 521, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$8.42\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well LPHC-18-350 AC-DC Single output LED driver Constant Current

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION

ENVIRONMENT

SAFETY & EMC (Note 5)

OTHERS

Technical drawings

Downloads

Certificates1

Test reports1

Catalogues1

FAQ

Payment & Security

Write a review

Your cart

Mean Well LPHC-18-350 AC-DC Single output LED driver Constant Current

Features

Company Information

Services and Support

Choose options