Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
LPC-60-1400 is the model of this series: rated current 1400mA, rated power 58.8W, typical efficiency 85%.
Features
- Constant current design
- Universal AC input / Full range
- Withstand 300VAC surge input for 5 seconds
- Protections: Short circuit / Over voltage
- Cooling by free air convection
- Fully encapsulated with IP67 level (Note.6)
- Fully isolated plastic case
- Class Ⅱ power unit, no FG
- Class 2 power unit
- Pass LPS
- Display devices for decorative & advertising accessories (Note.9)
- 100% full load burn-in test
- Low cost, high reliability
- 2 years warranty
Specifications
OUTPUT
- RATED CURRENT
- 1400mA
- CONSTANT CURRENT REGION
- 9 ~ 42V
- RATED POWER
- 58.8W
- CURRENT RIPPLENote.2
- ±5%
- VOLTAGE TOLERANCE
- ±5.0%
- CURRENT ACCURACY
- ±5.0%
- SETUP, RISE TIMENote.5
- 500ms, 120ms / 230VAC 500ms, 120ms / 115VAC at full load
- HOLD UP TIME (Typ.)
- 50ms/230VAC 16ms/115VAC at full load
INPUT
- VOLTAGE RANGENote.3
- 90 ~ 264VAC 127 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- EFFICIENCY (Typ.)
- 85%
- AC CURRENT (Typ.)
- 1.2A/115VAC 0.7A/230VAC
- INRUSH CURRENT(Typ.)
- COLD START 60A(twidth=540μs measured at 50% Ipeak) at 230VAC
- MAX. No. of PSUs on 16A CIRCUIT BREAKER
- 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
- LEAKAGE CURRENT
- 0.25mA / 240VAC
PROTECTION
- OVER VOLTAGE
- 44.1 ~ 56.7V Protection type : Shut off o/p voltage, clamping by TVS diode
ENVIRONMENT
- WORKING TEMP.
- -30 ~ +70℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20 ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +80℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03%/℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- UL1310, CAN/CSA C22.2 No. 223-M91(for LPC-60-1750 only), BIS IS15885(except for LPC-60-1750), EAC TP TC 004, IP67, IEC62368-1 , BS EN/EN62368-1 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVAC
- ISOLATION RESISTANCE
- I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A, BS EN/EN61000-3-3, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level, EAC TP TC 020
OTHERS
- MTBF
- 5269.3K hrs min. Telcordia SR-332 (Bellcore) ; 567.2K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 162.5*42.5*32mm (L*W*H)
- PACKING
- 0.4Kg; 32pcs/13.8Kg/0.63CUFT
Certifications & ratings
- Marked features
- LPS
Test conditions and notes9
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- 2. Current ripple is measured 60%~100% of maximum voltage under rated power delivery.
- 3. Derating may be needed under low input voltage. Please check the static characteristics for more details.
- 4. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
- 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
- 6. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minute.
- 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
- 8. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
- 9. This product is not intended for LED lighting luminaire applications in the EU and China.(In the EU and China the LPF/NPF/XLG/XLC/XLN series are recommended.)
Technical drawings
Downloads
FAQ
Can I use the LPC-60-1400 for a 1400mA LED downlight?
Yes, if the downlight is designed for constant current operation at 1400mA. This driver supports a 9-42V CC output range and up to 58.8W, so both the current and voltage window need to match the fixture. The sheet states it is not intended for LED luminaire applications in the EU and China.
Is the LPC-60-1400 suitable for LED signage modules that need more current?
It can be suitable for signage modules built around a 1400mA constant current load. The total forward voltage has to stay within 9-42V, and the total load must remain within the 58.8W rating.
Can this driver run a compact LED array where a 1050mA model is not enough?
Yes, the LPC-60-1400 provides 1400mA constant current, which is higher than a 1050mA model. It is appropriate for small LED arrays specified for 1400mA and operating within the 9-42V constant current range.
What should I check before pairing the LPC-60-1400 with my LEDs?
Check that your LEDs are meant for constant current operation at 1400mA and that the total forward voltage falls within 9-42V. The number of LEDs cannot be set as a fixed count because it depends on each LED's forward voltage, and this is not a constant voltage driver.
Is the LPC-60-1400 appropriate for outdoor or enclosed fixture use?
Its IP67 rating supports indoor or outdoor use without direct sunlight exposure, and the operating range is -30°C to +70°C with derating per the derating curve. The fully isolated plastic case measures 162.5×42.5×32mm, but overall suitability still depends on the complete fixture design.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other LPC-60 Models
1 other model| Model | Power | Voltage | Current | IP Rating | |
|---|---|---|---|---|---|
| Mean Well LPC-60-1750 Power Supply 60W 1750mA | 59.5W | 34V | 1.75A | IP67 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.







