Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
LDH-25-700 is the model of this series: rated current 700mA, rated power 25.2W, typical efficiency 92.5%/12V 95.5%/24V.
LDH-25 series is a 25W DC/DC LED driver featuring constant current output. LDH-25 operates from 9.5~32VDC and offers models with different rated current ranging between 250mA and 700mA. With the high efficiency up to 95.5%, The 94V-0 flame retar-dant plastic case the fully-potted silicore e enhance the heat dissipation allows this series to fit solar LED street light. LDH-25 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for DC source LED lighting system.
Features
- Wide DC input voltage operation 9.5~32V
- DC/DC step-up converter
- Constant current output : 250mA to 700mA
- Wide output LED forward voltage up to 84V DC
- High efficiency up to 95.5%
- 2 in 1 dimming (0-10V, PWM)
- Protections: Short circuit / Over voltage
- Cooling by free air convection
- Fully encapsulated
- 3 years warranty
Specifications
OUTPUT
- RATED CURRENT
- 700mA
- CURRENT ACCURACY(Typ.)
- ±5% at 12VDC input and 24 VDC Input
- VOLTAGE RANGENote.2
- 12.5~36VDC
- RATED POWER
- 25.2W
- CURRENT RIPPLE
- 5%(@rated current)
INPUT
- VOLTAGE RANGENote.2
- 9.5~32VDC
- EFFICIENCY (Typ.)
- 92.5%/12V 95.5%/24V
- DC CURRENT (Typ.)
- 2.5A/12VDC, 1.2A/24VDC
DIMMING
- DIMMING FUNCTIONNote.2
- Leave open if not used 1KHz-3KHz 10V PWM signal or 0-10V DC input
- QUIESCENT INPUT CURRENT IN SHUTDOWN MODE(Typ.)
- 7mA when PWM dimming OFF @12VDC
PROTECTION
- SHORT CIRCUIT
- Output short circuit, the power supply will be damaged
- OVER VOLTAGE
- 37~60V
- NO LOAD
- Output voltage rise to OVP, and drop equal to input voltage, re-power to recovery
ENVIRONMENT
- WORKING TEMP.
- -40 ~ +70℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20 ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +85℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03%/℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
- SOLDERING TEMPERATURE
- Wave soldering: 265℃,5s (max.); Manual soldering: 390℃,3s (max.)
SAFETY & EMC
- SAFETY STANDARDS
- LVD BS EN/EN61347-1, BS EN/EN61347-2-13, EAC TP TC 004 approved
- EMC EMISSIONNote.5
- Compliance to BS EN/EN55015;EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61547,BS EN/EN61000-4-2,3,4,6,8; light industry level,EAC TP TC 020
OTHERS
- MTBF
- 12369.5K hrs min. Telcordia TR/SR-332(Bellcore); 896.4Khrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 52.4*27.2*24mm (L*W*H)
- PACKING
- Pin mounted style: 50g, 200pcs/11Kg/0.89CUFT; Lead wire style: 57g, 200pcs/12.4kg/0.98CUFT
Test conditions and notes5
- 1.All parameters are specified at normal input(12VDC), rated load, 25℃ 70% RH ambient.
- 2.Non dimming application: Output voltage must step up by 3 Volts from input DC voltage Dimming application: Output voltage must be twice higher than the input DC voltage If input voltage down below 11V, the output current may drop to more than 80% of the rated current
- 3.This series meets the typical life expectancy of >35,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80℃ or less.
- 4.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
- 5.BS EN/EN55015 EMI testing layout is based on DC input with a battery source
Technical drawings
Typical applications
- DC battery source lighting
- Portable lighting
- LED solar street lighting
- LED greenhouse lighting
- LED Low-bay lighting
Downloads
FAQ
Can I use the LDH-25-700 for LED downlights that require 700mA?
Yes, if the downlight is designed for constant current operation at 700mA and the total LED forward voltage is within the 12.5-36V CC range. This model delivers up to 25.2W and is meant for constant current LED loads, not constant voltage fixtures.
Is the LDH-25-700 suitable for small high-current LED arrays?
It is a fit for small LED arrays that need 700mA regulated current and operate within the 12.5-36V constant current range. With 25.2W output, it is aimed at compact constant current LED applications rather than larger higher-power arrays.
Can this driver be used with signage modules that run on constant current?
Yes, if the signage modules are specified for 700mA constant current operation and the combined LED forward voltage stays within 12.5-36V. It is not intended for constant voltage signage modules that are designed around a fixed-voltage supply.
How do I check LED compatibility with the LDH-25-700?
The LED load must require 700mA constant current, and its combined forward voltage must fall inside the 12.5-36V CC output window. The number of LEDs depends on the forward voltage of each LED, so there is no single fixed LED count for this driver.
Is the LDH-25-700 designed for wide temperature conditions?
It is rated to operate from -40°C to +70°C (refer to the derating curve), which supports use across a broad temperature range. The compact pin-style housing measures 52.4 × 27.2 × 24.0 mm and weighs 0.05 kg.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.




