Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
LDH-65-1750W is the model of this series: rated current 1750mA, rated power 64.75W, typical efficiency 92.5%/12V 96%/24V.
LDH-65 series is a 65W DC/DC LED driver featuring constant current output. LDH-65 operates from 9.5~32VDC and offers models with different rated current ranging between 700mA and 1750mA. With the high efficiency up to 96%, The 94V-0 flame retardant plastic case the fully-potted silicone enhance the heat dissipation allows this series to fit solar LED street light. LDH-65 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for DC source LED lighting system.
Features
- Wide DC input voltage operation 9.5~32V
- DC/DC step-up converter
- Constant current output : 700mA to 1750mA
- Wide output LED forward voltage up to 80V DC
- High efficiency up to 96%
- 2 in 1 dimming (0-10V,PWM)
- Protections: Short circuit / Over voltage
- Cooling by free air convection
- Fully encapsulated
- 3 years warranty
Specifications
OUTPUT
- RATED CURRENT
- 1750mA
- CURRENT ACCURACY(Typ.)
- ±5% at 12VDC input and 24VDC input
- VOLTAGE RANGENote.2
- 12.5~37VDC
- RATED POWER
- 64.75W
- CURRENT RIPPLE
- 5%(@rated current)
INPUT
- VOLTAGE RANGENote.2
- 9.5~32VDC
- EFFICIENCY (Typ.)
- 92.5%/12V 96%/24V
- DC CURRENT (Typ.)
- 6.2A/12VDC, 3.1A/24VDC
DIMMING
- DIMMING FUNCTIONNote.2
- Leave open if not used 1KHz-3KHz 10V PWM signal or 0-10V DC input
- QUIESCENT INPUT CURRENT IN SHUTDOWN MODE(Typ.)
- 10mA when PWM dimming OFF @12VDC
PROTECTION
- SHORT CIRCUIT
- Output short circuit, the power supply will be damaged
- OVER VOLTAGE
- 38~60V
- NO LOAD
- Output voltage rise to OVP, and drop equal to input voltage, re-power to recovery
ENVIRONMENT
- WORKING TEMP.
- -40 ~ +60℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20 ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +85℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03%/℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
- SOLDERING TEMPERATURE
- Wave soldering: 265℃,5s (max.); Manual soldering: 390℃,3s (max.)
SAFETY & EMC
- SAFETY STANDARDS
- LVD BS EN/EN61347-1, BS EN/EN61347-2-13, EAC TP TC 004 approved
- EMC EMISSIONNote.5
- Compliance to BS EN/EN55015;EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61547,BS EN/EN61000-4-2,3,4,6,8; light industry level, EAC TP TC 020
OTHERS
- MTBF
- 9118.4K hrs min. Telcordia TR/SR-332(Bellcore); 874.9 Khrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 75*53*22.7mm (L*W*H)
- PACKING
- Pin mounted style: 152g; 100pcs/15.2kg/0.86CUFT Lead wire style: 159g; 100pcs/15.9kg/1.07CUFT
Test conditions and notes5
- 1.All parameters are specified at normal input(12VDC), rated load, 25℃ 70% RH ambient.
- 2.Non dimming application: Output voltage must step up by 3 volts from input DC voltage Dimming application: Output voltage must be twice higher than the input DC voltage If input voltage down below 11, the output current may drop to more than 80% of the rated current
- 3.This series meets the typical life expectancy of >35,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80℃ or less.
- 4.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
- 5.BS EN/EN55015 EMI testing layout is based on DC input with a battery source.
Technical drawings
Typical applications
- DC battery source lighting
- Portable lighting
- LED solar street lighting
- LED greenhouse lighting
- LED Low-bay lighting
Downloads
FAQ
Can I use the LDH-65-1750W for a constant current LED downlight?
Yes, if the downlight requires 1750mA constant current and the LED load operates within the 12.5-37V CC output range. This 64.75W step-up driver is intended for constant current LED loads, not constant voltage fixtures.
Will the LDH-65-1750W work for LED sign lighting modules?
It can work for sign lighting only when the module is built for 1750mA constant current operation and the total LED forward voltage stays within 12.5-37V. It should not be used as a substitute for a constant voltage power supply for standard sign modules.
Is this a good driver for a compact high-output LED array?
Yes, it is designed for constant current LED arrays that need 1750mA and fall within a 12.5-37V CC range. With 64.75W available, it is better suited to higher-power arrays than lower-current LDH models.
What LEDs can I pair with the LDH-65-1750W?
The LED load must be specified for constant current operation at 1750mA, and the combined LED forward voltage must remain within the 12.5-37V CC output range. The number of LEDs depends on each LED's forward voltage, so it cannot be defined by a single fixed count.
How does the LDH-65-1750W compare with the rest of the LDH-65 range?
Within the LDH-65 range, the sibling specs are: LDH-65-700 and LDH-65-700W at 700mA with a 12.5-80V CC range and 56W, LDH-65-1050 and LDH-65-1050W at 1050mA with a 12.5-60V CC range and 63W, LDH-65-1400 and LDH-65-1400W at 1400mA with a 12.5-46V CC range and 64.4W, and LDH-65-1750 at 1750mA with a 12.5-37V CC range and 64.75W. The LDH-65-1750W matches the LDH-65-1750 electrically, with the listed product difference being wire style versus pin style.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.




