Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well ELG-200-C700B Power Supply 200W 700mA - Dimmable

contant currentmetal caseIP65/IP675 years warranty
SKU ELG-200-C700B
$53.97 USD
Shipping calculated at checkout.
Model

Select model — 25 in this family

ELG-200-C700B
In stock
|

Overview

ELG-200-C700B is the model of this series: rated current 700mA, typical efficiency 93%.

ELG-200-C series is a 200W LED AC/DC driver featuring the constant current mode and high voltage output. ELG-200-C operates from 100~305VAC and offers models with different rated current ranging between 700mA and 2100mA. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40℃~+85℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. ELG-200-C is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Features

  • Constant current mode output
  • Metal housing design with functional Ground
  • Built-in active PFC function
  • No load / Standby power consumption <0.5W
  • IP67 / IP65 rating for indoor or outdoor installations
  • Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off); Smart timer dimming; DALI
  • Typical lifetime>50000 hours
  • 5 years warranty

Specifications

ELG-200-C700BSpecifications from the official datasheet (2026-07-06 edition)

OUTPUT

RATED CURRENT
700mA
RATED POWER 200VAC ~ 305VAC
200.2W
RATED POWER 100VAC ~ 180VAC
150.5W
CONSTANT CURRENT REGIONNote.2
142 ~ 286V
OPEN CIRCUIT VOLTAGE(max.)
300V
CURRENT ADJ. RANGE
Adjustable for A/AB-Type only (via built-in potentiometer) 350 ~ 700mA
CURRENT RIPPLE
5.0% max. @rated current
CURRENT TOLERANCE
±5.0%
SET UP TIMENote.4
800ms/115VAC, 500ms/230VAC

INPUT

VOLTAGE RANGENote.3
100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION
THD< 20%(@load≧50%/115VC,230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY (Typ.)
93%
AC CURRENT (Typ.)
1.8A / 115VAC 1.0A / 230VAC 1.0A/277VAC
INRUSH CURRENT(Typ.)
COLD START 65A(twidth=680μs measured at 50% Ipeak)/230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER
2 units (circuit breaker of type B) / 4 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
NO LOAD / STANDBY POWER CONSUMPTION
No load power consumption <0.5W for Blank / A-Type Standby power consumption <0.5W for B / AB / DA-Type

PROTECTION

SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
315 ~ 370V Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE
Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.
Tcase=-40 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.
Tcase=+85℃
WORKING HUMIDITY
20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 60℃)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
UL8750(type”HL”), CSA C22.2 No. 250.13-12;BS EN/EN/AS/NZS 61347-1,BS EN/EN/AS/NZS 61347-2-13 independent, BS EN/EN62384;GB/T19510.1,GB/T19510.213;EAC TP TC 004;BIS IS15885(for 700A only); IP65 or IP67;KC61347-1,KC61347-2-13 approved
DALI STANDARDS
Compliance to IEC62386-101,102,(207 by request) for DA Type only
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@load≧50%) ; BS EN/EN61000-3-3; GB/T 17743, GB17625.1; EAC TP TC 020; KC KN15,KN61547
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level(surge immunity:Line-Earth:6KV, Line-Line:4KV);EAC TP TC 020; KC KN15,KN61547

OTHERS

MTBF
2728.6K hrs min. Telcordia SR-332 (Bellcore) ;217.6K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
244*71*37.5 mm (L*W*H)
PACKING
1.22Kg; 12pcs /15.2kg / 0.72CUFT

Certifications & ratings

Type
Type HL
Test conditions and notes11
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
  2. 2. Please refer to "DRIVING METHODS OF LED MODULE".
  3. 3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
  4. 4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
  5. 5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
  6. 6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 85℃ or less.
  7. 7. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
  8. 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
  9. 9. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
  10. 10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
  11. 11. For A/AB type need to consider build in using to comply with Type HL application.

Technical drawings

ELG-200-C700B BLOCK DIAGRAM
BLOCK DIAGRAM
ELG-200-C700B DIMMING OPERATION
DIMMING OPERATION
ELG-200-C700B OUTPUT LOAD vs TEMPERATURE(Note.7)
OUTPUT LOAD vs TEMPERATURE(Note.7)
ELG-200-C700B STATIC CHARACTERISTIC
STATIC CHARACTERISTIC
ELG-200-C700B TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION
ELG-200-C700B LIFETIME(Kh)
LIFETIME(Kh)
ELG-200-C700B MECHANICAL SPECIFICATION
MECHANICAL SPECIFICATION
ELG-200-C700B ※ AB-Type
※ AB-Type
ELG-200-C700B Dimensions (mm)
Dimensions (mm)
ELG-200-C700B ※ B/DA-Type
※ B/DA-Type
ELG-200-C700B ※ 3Y Model (3-wire input)
※ 3Y Model (3-wire input)
ELG-200-C700B Recommend Mounting Direction
Recommend Mounting Direction

Typical applications

  • LED street lighting
  • LED harbar lighting
  • LED bay lighting
  • LED greenhouse lighting
  • LED flood lighting
  • Type "HL" for use in Class I, Division 2 hazardous (Classified) location.

Downloads

FAQ

Can the ELG-200-C700B be used to power LED modules in an outdoor architectural lighting installation?

Yes. The ELG-200-C700B carries an IP67 waterproof rating, meaning it can be installed in outdoor enclosures or luminaires exposed to rain and temporary water immersion. It delivers 200.2W at 700mA constant current, suitable for series-connected LED modules in facade, landscape, or sign lighting.

Is the ELG-200-C700B suitable for driving LED downlights in a commercial space with a dimming control system?

Yes. The 'B' designation indicates built-in 3-in-1 dimming support, allowing the driver to respond to a 0–10VDC, 10V PWM or resistance dimming input from a building control system. At 700mA and up to 200.2W, it can drive a substantial LED downlight array. The LED chain must present a combined forward voltage within the 142–286V CC range.

Can this driver be installed in a wet-rated or washdown area without additional enclosure protection?

The ELG-200-C700B is rated IP67, which means it is dust-tight and protected against temporary immersion in water. This allows installation in wet-rated luminaire housings and outdoor locations; the sheet does not rate it for washdown. Follow Mean Well's user manual for IP waterproof installation cautions.

What is the LED load compatibility of the ELG-200-C700B in terms of voltage range?

The ELG-200-C700B is a constant current driver outputting 700mA with a CC voltage range of 142–286V. Any LED load with a combined forward voltage falling within that range at 700mA is compatible. The actual number of LEDs depends on the forward voltage of each LED at operating current.

How does the ELG-200-C700B compare to the ELG-200-C700A and ELG-200-C700AB?

The ELG-200-C700B provides analog dimming but no output adjustment (trimming), while the ELG-200-C700A is adjustable with no dimming and the ELG-200-C700AB combines both features. The ELG-200-C700B and ELG-200-C700DA both carry IP67 ratings, whereas the A and AB variants are IP65. All share 200.2W output and 700mA constant current.

Can the ELG-200-C700B operate reliably in an unheated outdoor cabinet during winter?

Yes. The case temperature (Tcase) rating is -40°C to +85°C, so the driver handles extreme cold. Combined with IP67 waterproofing, the ELG-200-C700B is well suited to unheated outdoor enclosures in cold climates.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8649313747264, "variants" :[{ "context":"default", "variant_id": 46609173545280, "sku":"ELG-200-C700B", "inventory_qty" : 2, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$53.97\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well ELG-200-C700B Power Supply 200W 700mA - Dimmable
Mean Well

Mean Well ELG-200-C700B Power Supply 200W 700mA - Dimmable

$53.97 USD

ELG-200-C700B is the model of this series: rated current 700mA, typical efficiency 93%.

ELG-200-C series is a 200W LED AC/DC driver featuring the constant current mode and high voltage output. ELG-200-C operates from 100~305VAC and offers models with different rated current ranging between 700mA and 2100mA. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40℃~+85℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. ELG-200-C is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Features

  • Constant current mode output
  • Metal housing design with functional Ground
  • Built-in active PFC function
  • No load / Standby power consumption <0.5W
  • IP67 / IP65 rating for indoor or outdoor installations
  • Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off); Smart timer dimming; DALI
  • Typical lifetime>50000 hours
  • 5 years warranty

Typical applications

  • LED street lighting
  • LED harbar lighting
  • LED bay lighting
  • LED greenhouse lighting
  • LED flood lighting
  • Type "HL" for use in Class I, Division 2 hazardous (Classified) location.

Model

  • 75W 700mA
  • 75W 700mA Adjustable
  • 75W 700mA Adjustable and Dimmable
  • 75W 700mA DALI
  • 75W 700mA Dimmable
  • 100W 700mA
  • 100W 700mA Adjustable
  • 100W 700mA Adjustable and Dimmable
  • 100W 700mA DALI
  • 100W 700mA Dimmable
  • 150W 700mA
  • 150W 700mA Adjustable
  • 150W 700mA Adjustable and Dimmable
  • 150W 700mA DALI
  • 150W 700mA Dimmable
  • 200W 700mA
  • 200W 700mA Adjustable
  • 200W 700mA Adjustable and Dimmable
  • 200W 700mA DALI
  • 200W 700mA Dimmable
  • 240W 700mA
  • 240W 700mA Adjustable
  • 240W 700mA Adjustable and Dimmable
  • 240W 700mA DALI
  • 240W 700mA Dimmable
View product