Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well LPVL-150-24 Power Supply 150W 24V 6.3A

Name: Mean Well LPVL-150-24 Power Supply 150W 24V 6.3A
Brand: Mean Well
SKU: LPVL-150-24
Price: 38.04 USD
Availability: InStock

slim plastic caseeconomicalIP67

SKU LPVL-150-24

$38.04 USD

Shipping calculated at checkout.

Select model — 5 in this family

LPVL-150-24

LPV-20-24 20W 24V In stock$12.15 USD

LPV-35-24 35W 24V In stock$16.96 USD

LPV-60-24 60W 24V In stock$18.90 USD

LPV-100-24 100W 24V In stock$29.85 USD

LPVL-150-24 150W 24V In stock$38.04 USD

Product variants

In stock

Overview

LPVL-150-24 is the 24V output model of this series: rated current 6.3A, rated power 151.2W, typical efficiency 89%. Type L: AC input range 90~132VAC.

LPV-150 and LPVL-150 are 150W single output power supplies that specifically and perfectly work for LED related fixture or applianc e. As a class II power unit, these two series are housed with the UL 94V-0 rated flame retardant plastic enclosure. The IP67 design allows every model to fit the use at dry, damp and wet locations. Both series are constant voltage mode design that various models with 12V, 15V, 24V, 36V and 48V are offered for LPV-150 where as 12V and 24V are provided for LPVL-150.

Features

Constant voltage design
90~132VAC input for LPVL-150 180~305VAC input for LPV-150
Fully encapsulated with IP67 level (Note.7)
ClassⅡpower unit, no FG
Protections: Short circuit/Overload/Over voltage/ Over temperature
Fully isolated plastic case
Fanless design, cooling by free air convection
100% full load burn-in test
Low cost, high reliability
Listed in UL Sign Component Manual (SAM)
Type "HL" for use in class I, Division 2 hazardous (Classified) location luminaires for LPVL-150
2 years warranty

Specifications

LPVL-150-24Specifications from the official datasheet (2026-09-07 edition)

OUTPUT

DC VOLTAGE: 24V
RATED CURRENT: 6.3A
CURRENT RANGE: 0 ~ 6.3A
RATED POWER: 151.2W
RIPPLE & NOISE (max.)^Note.2: 200mVp-p
VOLTAGE TOLERANCE^Note.3: ±5.0%
LINE REGULATION: ±1.0%
LOAD REGULATION: ±2.0%
SETUP, RISE TIME^Note.6: LPV-150: 500ms, 50ms / 230VAC 500ms, 50ms / 277VAC; LPVL-150: 1500ms, 50ms / 115VAC
HOLD UP TIME (Typ.): LPV-150: 18ms/230VAC 20ms/277VAC at full load; LPVL-150: 10ms/115VAC at full load

INPUT

VOLTAGE RANGE^Note.4: LPV-150: 180 ~ 305VAC 254 ~ 431VDC; LPVL-150: 90~132VAC
FREQUENCY RANGE: 47 ~ 63Hz
EFFICIENCY (Typ.): 89%
AC CURRENT: LPV-150: 1.7A/230VAC 1.5A/277VAC; LPVL-150: 3.0A/115VAC
INRUSH CURRENT (Typ.) L type: COLD START 75A(twidth=900μs measured at 50% Ipeak) at 115VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER L type: 1 units (circuit breaker of type B) / 2 units (circuit breaker of type C) at 115VAC
LEAKAGE CURRENT: LPV-150: 0.25mA / 240VAC LPVL-150:0.25mA / 120VAC

PROTECTION

OVERLOAD: 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: 27 ~ 35V Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.: -25 ~ +65℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 40℃ for LPV-150-12,15 and LPVL-150-12,24;0~50℃ for LPV-150-24,36,48)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS L type: UL8750(type"HL"),CSA C22.2 No 250.13-12,UL879,CSA C22.2 No.207-M89,IP67 approved
WITHSTAND VOLTAGE: I/P-O/P:3KVAC
ISOLATION RESISTANCE: I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION L type: Compliance to FCC part 15
EMC IMMUNITY Blank type: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN55035, light industry level, EAC TP TC 020
EMC IMMUNITY L type: Design refer to IEC61000-4-2,3,4,5,6,8,11; light industry level

OTHERS

MTBF: 3361.2K hrs min. Telcordia SR-332 (Bellcore) ; 391.9Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 191*63*37.5mm (L*W*H)
PACKING: LPV-150: 0.79Kg;20pcs/17Kg/0.98CUFT; LPVL-150: 0.79Kg;20pcs/17Kg/0.98CUFT

MODEL ENCODING

Blank: AC input range 180~305VAC
L (this model): AC input range 90~132VAC

Test conditions and notes10

1. All parameters NOT specially mentioned are measured at 230VAC(115VAC for LPVL) input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
7. Suitable for indoor use or outdoor use without direct sunlight exposure.
8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
9. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
10. This product is not intended for LED lighting luminaire applications in the EU and China.(In the EU and China the LPF/NPF/XLG/XLC/XLN series are recommended.)

Technical drawings

LPVL-150-24 Mechanical Specification — Mechanical Specification

LPVL-150-24 Recommend Mounting Direction — Recommend Mounting Direction

LPVL-150-24 Block Diagram — Block Diagram

LPVL-150-24 Derating Curve — Derating Curve

Typical applications

Display devices for decorative & advertising accessories (Note.10)
General purpose electronics operated in dusty or damp environments

Downloads

Datasheet1

LPVL-150-24 datasheetLPV,LPVL-150-SPEC.pdf · 2026-09-07 edition PDF Download

Certificates5

Mean Well LPVL-150-FCC Certificate PDF Download

Mean Well E320521-UL Certificate PDF Download

Mean Well E334687-UL Certificate PDF Download

Mean Well LPVL-150-EMC Certificate PDF Download

Mean Well LPV-150-UK-dec Certificate PDF Download

Test reports1

Mean Well LPVL-150-12 Test Report PDF Download

Catalogues1

Mean Well LED Driver Catalog PDF Download

FAQ

Can I use the LPVL-150-24 for 24V LED strip lights?

Yes, this is a 24V constant voltage LED driver made for 24V LED strip systems. It can supply up to 151.2W total at 6.3A, so the connected strip load must stay within that output capacity.

Will the LPVL-150-24 work for 24V LED sign lighting?

It can work for 24V LED sign lighting if the sign uses constant voltage components matched to 24V. The main sizing check is the total load, because this unit is rated for 151.2W output.

Is this driver a good match for 24V linear or cove lighting?

Yes, it is suitable for 24V linear or cove lighting systems that require constant voltage power. With 24V output and 151.2W maximum power, it fits longer or higher-load 24V lighting runs as long as the total wattage stays within spec.

Can I use the LPVL-150-24 for outdoor 24V landscape or architectural lighting?

Yes, it is an IP67 waterproof driver, so it is suited to outdoor or damp environments where a sealed power supply is required. Its operating temperature range is -25°C to +65°C, so site conditions should remain within that range.

How do I estimate the maximum 24V LED strip length this driver can support?

Use this sizing method: 151.2W divided by your strip's rated power per meter equals the estimated maximum length. This driver provides up to 151.2W total at 24V, but you should check your strip rated power per meter before choosing the run length.

What is the difference between the LPVL-150-24 and LPVL-150-12?

The LPVL-150-24 is rated at 24V, 6.3A, and 151.2W, while the LPVL-150-12 is rated at 12V, 10A, and 120W. Both share the same 191.0 × 63.0 × 37.5 mm dimensions, 0.79 kg weight, IP67 rating, 90-132VAC input, and -25°C to +65°C operating temperature range.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Please log in to write a review.

{ "id":8649449210176, "variants" :[{ "context":"default", "variant_id": 46610257477952, "sku":"LPVL-150-24", "inventory_qty" : 96, "customer" :true, "custom_html" :"\u003cdiv class=\"price\"\u003e\n \u003cdiv class=\"price__default\"\u003e\n \u003cstrong class=\"price__current\"\u003e$38.04\u003c\/strong\u003e\n \u003cs class=\"price__was\"\u003e\u003c\/s\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"unit-price relative\" hidden\u003e\u003cspan class=\"visually-hidden\"\u003eUnit price\u003c\/span\u003e\u003cspan class=\"unit-price__price\"\u003e\u003c\/span\u003e\u003cspan class=\"unit-price__separator\"\u003e \/ \u003c\/span\u003e\u003cspan class=\"unit-price__unit\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n \u003cdiv class=\"price__no-variant\" hidden\u003e\n \u003cstrong class=\"price__current\"\u003eUnavailable\u003c\/strong\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }