Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
HLG-80H-C700B is the model of this series: rated current 700mA, rated power 90.3W, typical efficiency 91.5%.
HLG-80H-C series is a 90W AC/DC LED driver featuring the constant current mode and high voltage output. HLG-80H-C operates from 90~305VAC and offers models with different rated current ranging between 350mA and 700mA. Thanks to the high efficiency up to 91.5%, with the fanless design, the entire series is able to operate for -40℃ ~ +80℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-80H-C is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
Features
- Constant current mode output
- Metal housing with ClassⅠdesign
- Built-in active PFC function
- IP67 / IP65 design for indoor or outdoor installations
- Function options: output adjustable via potentiometer; 3 in 1 dimming; Timer dimming
- Typical lifetime>62000 hours
- 7 years warranty
Specifications
OUTPUT
- RATED CURRENT
- 700mA
- RATED POWER
- 90.3W
- CONSTANT CURRENT REGIONNote.2
- A-Type : 64V ~ 129V B-Type : 84V ~ 129V
- CURRENT ADJ. RANGE
- 420 ~ 700mA
- CURRENT RIPPLE
- 8.0% max. @rated current
- CURRENT TOLERANCE
- ±5%
- SET UP TIMENote.4
- 500ms/115VAC, 230VAC
INPUT
- VOLTAGE RANGENote.3
- 90 ~ 305VAC 127 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section)
- FREQUENCY RANGE
- 47 ~ 63Hz
- POWER FACTOR (Typ.)
- PF≧0.98/115VAC, PF≧0.96/230VAC, PF≧0.94/277VAC @full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
- TOTAL HARMONIC DISTORTION
- THD< 20% (@ load≧60% /115VAC, 230VAC; @ load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)
- EFFICIENCY (Typ.)
- 91.5%
- AC CURRENT (Typ.)
- 0.88A / 115VAC 0.45A / 230VAC 0.38A / 277VAC
- INRUSH CURRENT(Typ.)
- COLD START 60A(twidth=410μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
- MAX. No. of PSUs on 16A CIRCUIT BREAKER
- 4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
- LEAKAGE CURRENT
- <0.75mA / 277VAC
PROTECTION
- SHORT CIRCUIT
- Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 150 ~ 170V Shut down o/p voltage with auto-recovery or re-power on to recovery
- OVER TEMPERATURE
- Shut down o/p voltage, re-power on to recover
ENVIRONMENT
- WORKING TEMP.
- Tcase=-40 ~ +80℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)
- MAX. CASE TEMP.
- Tcase=+80℃
- WORKING HUMIDITY
- 10 ~ 95% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +80℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03%/℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDSNote.6
- UL8750, CSA C22.2 No. 250.0-08, BS EN/EN/AS/NZS 61347-1,BS EN/EN/AS/NZS 61347-2-13 independent,GB/T19510.1, GB/T19510.213,EAC TP TC 004,IP65 or IP67 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
- ISOLATION RESISTANCE
- I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSIONNote.6
- Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load≧50%) ; BS EN/EN61000-3-3,GB/T 17743 , GB17625.1, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, heavy industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020
OTHERS
- MTBF
- 3098.6K hrs min. Telcordia SR-332 (Bellcore) ; 309.8K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 195.6*61.5*38.8 mm (L*W*H)
- PACKING
- 0.84Kg; 16pcs/14.4Kg/0.54CUFT
Test conditions and notes10
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
- 2. Please refer to "DRIVING METHODS OF LED MODULE".
- 3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
- 4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
- 5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
- 6. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.
- 7. This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70℃ or less.
- 8. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com.
- 9. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
- 10. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Technical drawings
Typical applications
- LED street lighting
- LED fishing lamp
- LED harbor lighting
- LED building architectural lighting
- LED greenhouse lighting
- LED bay lighting
Downloads
Certificates5
Test reports1
Catalogues1
FAQ
Can I use the Mean Well HLG-80H-C700B for LED downlights?
Yes, if the LED downlight system requires a constant current driver at 700mA and the total LED load stays within the 84-129V constant current range. This driver delivers up to 90.3W from a 90-305VAC input. It is a constant current LED driver, so it is not the right choice for fixtures that require a constant voltage supply.
Is the HLG-80H-C700B suitable for LED signage modules?
It can be suitable for signage modules when the LED load is designed for 700mA constant current operation and falls within the 84-129V output range. The series is IP65/IP67 approved, which also makes it a fit for signage exposed to dust or moisture. It should not be used as a constant voltage power supply for modules that expect a fixed voltage output.
Can this driver power a small LED array?
Yes, for a small LED array that is built for 700mA constant current and has a combined forward voltage within 84-129V. The driver provides up to 90.3W and has a maximum output voltage of 129V. The exact number of LEDs depends on the forward voltage of each LED, not on a fixed count.
Can I use this LED driver in indoor or outdoor lighting projects?
This model is designed for demanding environments: the series is IP65/IP67 approved and rated for a case temperature (Tcase) of -40°C to +80°C, with load derating at high temperatures. That makes it suitable for indoor installations and, with a waterproof connection on the cables, for outdoor applications. Its listed certifications, including UL8750 and EN 61347, also support use in commercial and industrial lighting systems.
How do I know if my LED load is compatible with the HLG-80H-C700B?
Your LED load must require 700mA constant current and operate within the driver's 84-129V constant current range. The exact number of LEDs depends on the forward voltage of each LED, so there is no single fixed LED count for this model. If your product needs constant voltage instead, this driver is not the correct match.
How does the HLG-80H-C700B compare with other HLG 80H constant current models?
Within the HLG-80H constant current range, the HLG-80H-C350B is rated at 89.95W, 257V max, and 350mA, while the HLG-80H-C700B is rated at 90.3W, 129V max, and 700mA. The HLG-80H-C700AB shares the same 90.3W, 129V max, and 700mA rating as this model. The main difference across these variants is the output current and corresponding output voltage.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.












